NAME
    Class::XSConstructor - a super-fast (but limited) constructor in XS

SYNOPSIS
      package Person {
        use Class::XSConstructor qw( name! age email phone );
        use Class::XSAccessor {
          accessors         => [qw( name age email phone )],
          exists_predicates => [qw(      age email phone )],
        };
      }

DESCRIPTION
    Class::XSAccessor is able to provide you with a constructor for your
    class, but it's fairly limited. It basically just does:

      sub new {
        my $class = shift;
        bless { @_ }, ref($class)||$class;
      }

    Class::XSConstructor goes a little further towards Moose-like
    constructors, adding the following features:

    *   Supports initialization from a hashref as well as a list of key-value
        pairs.

    *   Only initializes the attributes you specified. Given the example in
        the synposis:

          my $obj = Person->new(name => "Alice", height => "170 cm");

        The height will be ignored because it's not a defined attribute for
        the class. (In strict mode, an error would be thrown because of the
        unrecognized parameter instead of it simply being ignored.)

    *   Supports required attributes using an exclamation mark. The name
        attribute in the synopsis is required.

        When multiple required attributes are missing, the constructor will
        only report the first one it encountered, based on the order the
        attributes were declared in. This is for compatibility with Moo and
        Moose error messages, which also only report the first missing
        required attribute.

    *   Supports defaults and builders.

        For example:

          use Class::XSAccessor name => { default => '__ANON__' };

        Or:

          use Class::XSAccessor name => { default => sub { return '__ANON__' } };

        Or:

          use Class::XSAccessor name => { builder => '__fallback_name' };
          sub __fallback_name {
            return '__ANON__';
          }

        You can alternatively provide a string of Perl code that will be
        evaluated to generate the default:

          use Class::XSAccessor name => { default => \'sprintf("__%s__", uc "anon")' };

        If you expect subclasses to need to override defaults, use a builder.
        Subclasses can simply provide a method of the same name.

        The XS code has special faster code paths for the following defaults
        which are all very common values to choose as defaults:

          default => undef,
          default => 0,
          default => 1,
          default => !!0,
          default => !!1,
          default => "",
          default => \'[]',
          default => \'{}',

        If an attribute has a default or builder, its "required" status is
        ignored.

        Builders and coderef defaults are likely to siginificantly slow down
        your constructor.

    *   Provides support for type constraints.

          use Types::Standard qw(Str Int);
          use Class::XSConstructor (
            "name!"    => Str,
            "age"      => { isa => Int, default => 0 },
            "email"    => Str,
            "phone"    => Str,
          );

        Type constraints can also be provided as coderefs returning a boolean:

          use Types::Standard qw(Str Int);
          use Class::XSConstructor (
            "name!"    => Str,
            "age"      => { isa => Int, default => 0 },
            "email"    => sub { !ref($_[0]) and $_[0] =~ /\@/ },
            "phone"    => Str,
          );

        Type constraints are likely to siginificantly slow down your
        constructor.

        When multiple attributes fail their type check, the constructor will
        only report the first one it encountered, based on the order the
        attributes were declared in. This is for compatibility with Moo and
        Moose error messages, which also only report the first failed check.

        Note that Class::XSConstructor is only building your constructor for
        you. For read-write attributes, *checking the type constraint in the
        accessor is your responsibility*.

    *   Type coercions.

        If your type constraint is a Type::Tiny object which provides a
        coercion:

          coercion => 1

        Otherwise:

          foo => {
            default => sub { ... },
            isa     => sub { ... },
            coerce  => sub { my $oldval = $_[0]}; ...; return $newval },
          }

        Type coercions are likely to siginificantly slow down your
        constructor.

    *   Supports Moose/Moo/Class::Tiny-style `BUILD` methods.

        Including `__no_BUILD__`.

    *   Optionally supports strict-style constructors a la
        MooX::StrictConstructor and MooseX::StrictConstructor. To opt in, pass
        "!!" as part of the import line. Although it doesn't really matter
        where in the list you include it, I recommend putting it at the end
        for readability.

          use Class::XSConstructor qw( name! age email phone !! );

        Or:

          use Class::XSConstructor (
            "name!"    => Str,
            "age"      => Int,
            "email"    => sub { !ref($_[0]) and $_[0] =~ /\@/ },
            "phone"    => Str,
            "!!",
          );

        Error messages when violating the strict constructor will list all the
        unexpected arguments, but the order in which they are listed will be
        unpredictable.

        The strict constructor check happens *after* `BUILD` methods have been
        called. Because `BUILD` methods are passed a reference to the init
        args hashref, they can alter it, removing certain keys if they need
        to. For example:

            use v5.36;
    
            package Person {
        
                use Class::XSConstructor qw( fullname !! );
                use Class::XSAccessor { accessors => [ 'fullname' ] };
        
                sub BUILD ( $self, $args ) {
                    if ( exists $args->{given_name} and exists $args->{surname} ) {
                        $self->fullname(
                            join q{ } => (
                                delete $args->{given_name},
                                delete $args->{surname},
                            )
                        );
                    }
                }
            }
    
            my $bob = Person->new( given_name => 'Bob', surname => 'Dobalina' );
            say $bob->fullname;

    *   Constructor names other than `__PACKAGE__->new`:

          use Class::XSConstructor [ 'Person', 'create' ] => qw( name! age email phone );
  
          my $bob = Person->create( name => 'Bob Dobalina' );

        It is NOT possible to create two different constructors for the same
        class with different attributes for each:

          use Class::XSConstructor [ 'Person', 'new_by_phone' ] => qw( name! phone );
          use Class::XSConstructor [ 'Person', 'new_by_email' ] => qw( name! email );

        However, you can create multiple contructors that all use the same
        defined list of attributes.

          use Class::XSConstructor [ 'Person', 'new' ] => qw( name! phone email );
          Class::XSConstructor::install_constructor( 'Person::new_by_phone' );
          Class::XSConstructor::install_constructor( 'Person::new_by_email' );

API
    This section documents the API of Class::XSConstructor for other modules
    that wish to wrap its functionality (to perhaps provide additional
    features like accessors). If you are just using Class::XSConstructor to
    install a constructor into your class, you can skip this section of the
    documentation.

  Functions and Methods
    None of the following functions are exported.

    `Class::XSConstructor->import(@optlist)`
        Does all the setup for a class to install the constructor. Will
        determine which class to install the constructor into based on
        `caller` and call the method `new`. You can override this by passing
        an arrayref of the package name to do the setup for, followed by the
        method name for the constructor:

          Class::XSConstructor->import( [ $packagename, $methodname ], @optlist );

        For historical reasons, it is also possible to override the package
        name using:

          local $Class::XSConstructor::SETUP_FOR = 'Some::Package';
          Class::XSConstructor->import( @optlist );

        ... Though this does not allow you to provide a method name.

        Returns nothing.

    Class::XSConstructor::install_constructor($subname)
        Just installs the XS constructor without doing some of the necessary
        setup. $subname is a fully qualified sub name, like "Foo::new".

        This is automatically done as part of `import`, so if you're using
        `import`, you don't need to do this.

        Returns nothing.

  Use of Package Variables
    Class::XSConstructor stores its configuration for class Foo in a bunch of
    package variables with the prefix `Foo::__XSCON_`.

    The only supported use of these variables that you may need to be aware of
    is:

    $Foo::__XSCON_BUILD
        If set to "0", indicates that XSConstructor should not try to call
        `BUILD` methods for the class (probably because there are none, so it
        would be a waste of time scanning through the inheritance tree looking
        for them).

        If set to an arrayref of coderefs, these will be the methods which the
        constructor calls.

        If set to undef, the constructor will populate this method with either
        the value "0" or an arrayref of coderefs next time it is called.

        Any other value is invalid.

    $Foo::__XSCON_STRICT
        If set to true, indicates that XSConstructor should use a "strict"
        constructor, which complains about the presence of any unrecognized
        keys in the init args hashref.

CAVEATS
    Inheritance will automatically work if you are inheriting from another
    Class::XSConstructor class, but you need to set @ISA *before* importing
    from Class::XSConstructor (which will happen at compile time!)

    An easy way to do this is to use parent before using Class::XSConstructor.

      package Employee {
        use parent "Person";
        use Class::XSConstructor qw( employee_id! );
        use Class::XSAccessor { getters => [qw(employee_id)] };
      }

BUGS
    Please report any bugs to
    <http://rt.cpan.org/Dist/Display.html?Queue=Class-XSConstructor>.

SEE ALSO
    Class::Tiny, Class::XSAccessor.

AUTHOR
    Toby Inkster <tobyink@cpan.org>.

THANKS
    To everybody in *#xs* on irc.perl.org.

COPYRIGHT AND LICENCE
    This software is copyright (c) 2018-2019 by Toby Inkster.

    This is free software; you can redistribute it and/or modify it under the
    same terms as the Perl 5 programming language system itself.

DISCLAIMER OF WARRANTIES
    THIS PACKAGE IS PROVIDED "AS IS" AND WITHOUT ANY EXPRESS OR IMPLIED
    WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
    MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.

