# XF86Config
#
# Copyright (c) 1994 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
# 
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
# 
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
# 
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#

# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of 
# this file.
# **********************************************************************

# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

    RgbPath	"/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
# 
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
# 

    FontPath	"/usr/X11R6/lib/X11/fonts/misc/"
    FontPath	"/usr/X11R6/lib/X11/fonts/Type1/"
    FontPath	"/usr/X11R6/lib/X11/fonts/Speedo/"
    FontPath	"/usr/X11R6/lib/X11/fonts/75dpi/"
#    FontPath	"/usr/X11R6/lib/X11/fonts/100dpi/"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is 
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

#    NoTrapSignals

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

#    DontZap

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences.  This allows clients to receive these key events.

#    DontZoom

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Keyboard section
# **********************************************************************

Section "Keyboard"

    Protocol	"Standard"

# when using XQUEUE, comment out the above line, and uncomment the
# following line

#    Protocol	"Xqueue"

    AutoRepeat	500 5
# Let the server do the NumLock processing.  This should only be required
# when using pre-R6 clients
#    ServerNumLock

# Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1))
#    Xleds      1 2 3

# To set the LeftAlt to Meta, RightAlt key to ModeShift, 
# RightCtl key to Compose, and ScrollLock key to ModeLock:

#    LeftAlt     Meta
#    RightAlt    ModeShift
#    RightCtl    Compose
#    ScrollLock  ModeLock

EndSection


# **********************************************************************
# Pointer section
# **********************************************************************

Section "Pointer"
    Protocol    "PS/2"
    Device      "/dev/psm0"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

#    Protocol	"Xqueue"

# Baudrate and SampleRate are only for some Logitech mice

#    BaudRate	9600
#    SampleRate	150

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

    Emulate3Buttons
    Emulate3Timeout    50

# ChordMiddle is an option for some 3-button Logitech mice

#    ChordMiddle

EndSection


# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

    Identifier  "Mebius-LCD"
    VendorName  "SHARP"
    ModelName   "PC-A355"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

#    HorizSync   31.5 - 35.2

    HorizSync	30-64         # multisync
#    HorizSync	31.5, 35.2    # multiple fixed sync frequencies
#    HorizSync	15-25, 30-50  # multiple ranges of sync frequencies

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    VertRefresh 50-90

# Modes can be specified in two formats.  A compact one-line format, or
# a multi-line format.

# These two are equivalent

#    ModeLine "1024x768i" 45 1024 1048 1208 1264 768 776 784 817 Interlace

#    Mode "1024x768i"
#        DotClock	45
#        HTimings	1024 1048 1208 1264
#        VTimings	768 776 784 817
#        Flags		"Interlace"
#    EndMode

# This is a set of standard mode timings. Modes that are out of monitor spec
# are automatically deleted by the server (provided the HorizSync and
# VertRefresh lines are correct), so there's no immediate need to
# delete mode timings (unless particular mode timings don't work on your
# monitor). With these modes, the best standard mode that your monitor
# and video card can support for a given resolution is automatically
# used.

# 640x480 @ 60 Hz, 31.5 kHz hsync
#Modeline "640x480"     25.175 640  664  760  800   480  491  493  525
#Modeline "640x480"     25.2 640  664  760  800   480  491  493  525
###############################################################################
#
# 640x480@60Hz Non-Interlaced mode
# Horizontal Sync = 31.5kHz
# Timing: H=(0.95us, 3.81us, 1.59us), V=(0.35ms, 0.064ms, 1.02ms)
#
# name        clock   horizontal timing     vertical timing      flags
#ModeLine "640x480"     25.175  640  664  760  800    480  491  493  525 +hsync +vsync 

# 640x480@63Hz Non-Interlaced mode (non-standard)
# Horizontal Sync = 32.8kHz
# Timing: H=(1.41us, 1.41us, 5.08us) V=(0.24ms, 0.092ms, 0.92ms)
#
# name        clock   horizontal timing     vertical timing      flags
#ModeLine "640x480"     28.322  640  680  720  864    480  488  491  521

# VESA 640x480@72Hz Non-Interlaced mode
# Horizontal Sync = 37.9kHz
# Timing: H=(0.76us, 1.27us, 4.06us) V=(0.24ms, 0.079ms, 0.74ms)
#
# name        clock   horizontal timing     vertical timing      flags
#ModeLine "640x480"     31.5    640  664  704  832    480  489  492  520 +hsync +vsync
ModeLine "640x480"     31.5    640  664  704  832    480  489  492  520

# 800x600 @ 56 Hz, 35.15 kHz hsync
ModeLine "800x600"     36     800  824  896 1024   600  601  603  625 +hsync +vsync
#
# VESA 800x600@56Hz Non-Interlaced mode
# Horizontal Sync = 35.1kHz
# Timing: H=(0.67us, 2.00us, 3.56us) V=(0.03ms, 0.063ms, 0.70ms)
#
# name        clock   horizontal timing     vertical timing      flags
#ModeLine  "800x600"     36      800  824  896 1024    600  601  603  625
#
# Alternate 800x600@56Hz Non-Interlaced mode
# Horizontal Sunc = 35.4kHz
# Timing: H=(0.89us, 4.00us, 1.11us) V=(0.11ms, 0.057ms, 0.79ms)
#
# name        clock   horizontal timing     vertical timing      flags
#ModeLine  "800x600"     36      800  832  976 1016    600  604  606  634 
#ModeLine  "800x600"     36      800  832  976 1016    600  604  606  634 +hsync +vsync
#
# VESA 800x600@60Hz Non-Interlaced mode
# Horizontal Sync = 37.9kHz
# Timing: H=(1.00us, 3.20us, 2.20us) V=(0.03ms, 0.106ms, 0.61ms)
#
# name        clock   horizontal timing     vertical timing      flags
#ModeLine  "800x600"     40      800  840  968 1056    600  601  605  628 +hsync +vsync
#
# Alternate 800x600@60Hz Non-Interlaced mode
# Horizontal Sync = 37.9kHz
# Timing: H=(1.20us, 3.80us, 1.40us) V=(0.13ms, 0.053ms, 0.69ms)
#
# name        clock   horizontal timing     vertical timing      flags
#ModeLine  "800x600"     40      800 848 1000 1056     600  605  607  633
#
# VESA 800x600@72Hz Non-Interlaced mode
# Horizontal Sync = 48kHz
# Timing: H=(1.12us, 2.40us, 1.28us) V=(0.77ms, 0.13ms, 0.48ms)
#
# name        clock   horizontal timing     vertical timing      flags
#ModeLine  "800x600"     50      800  856  976 1040    600  637  643  666  +hsync +vsync

EndSection

# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"
    Identifier	"Generic VGA"
    VendorName	"Unknown"
    BoardName	"Unknown"
    Chipset	"generic"
    ClockChip	"cirrus"

#    VideoRam	256

#    Clocks	25.2 28.3 36

EndSection

# Sample Device for accelerated server:

# Section "Device"
#    Identifier	"Actix GE32+ 2MB"
#    VendorName	"Actix"
#    BoardName	"GE32+"
#    Ramdac	"ATT20C490"
#    Dacspeed	110
#    Option	"dac_8_bit"
#    Clocks	 25.0  28.0  40.0   0.0  50.0  77.0  36.0  45.0
#    Clocks	130.0 120.0  80.0  31.0 110.0  65.0  75.0  94.0
# EndSection

# Device configured by xf86config:

Section "Device"
    Identifier  "Mebius-SVGA"
    VendorName  "SHARP"
    BoardName   "LAPTOP-LCD"
    ChipSet	"clgd6235"
#    ChipSet	"clgd7543"
#    ChipSet	"cl6412"
    ClockChip	"cirrus"
    VideoRam    1024
     Option	"clgd6225_lcd"
#     Option	"no_pci_probe"
#    Option	"no_bitblt"
#    Option	"noaccel"
# Use Option "no_bitblt" if you have graphics problems. If that fails
# try Option "noaccel".
# Refer to /usr/X11R6/lib/doc/README.cirrus.
# To allow linear addressing, uncomment the Option line and the
# address that the card maps the framebuffer to.
#    Clocks  25.18
#    Clocks	31.5  50
EndSection


# **********************************************************************
# Screen sections
# **********************************************************************

# The Colour SVGA server

Section "Screen"
    Driver      "svga"
    # Use Device "Generic VGA" for Standard VGA 320x200x256
    #Device      "Generic VGA"
    Device      "Mebius-SVGA"
    Monitor     "Mebius-LCD"
    Subsection "Display"
        Depth       8
        # Omit the Modes line for the "Generic VGA" device
        Modes        "800x600" "640x480"
#        Modes       "640x480"
        ViewPort    0 0
        # Use Virtual 320 200 for Generic VGA
#        Virtual     640 480
        Virtual     800 600
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes        "800x600" "640x480"
#	Modes       "640x480"
        ViewPort    0 0
        Virtual     800 600
#        Virtual     640 480
    EndSubsection
    Subsection "Display"
        Depth       32
        Modes       "640x400"
        ViewPort    0 0
        Virtual     640 400
    EndSubsection
EndSection

# The 16-color VGA server

Section "Screen"
    Driver      "vga16"
    Device      "Generic VGA"
    Monitor     "Mebius-LCD"
    Subsection "Display"
        Modes       "800x600" "640x480"
        ViewPort    0 0
        Virtual     800 600
    EndSubsection
EndSection

# The Mono server

Section "Screen"
    Driver      "vga2"
    Device      "Generic VGA"
    Monitor     "Mebius-LCD"
    Subsection "Display"
        Modes       "640x480" "800x600"
        ViewPort    0 0
        Virtual     800 600
    EndSubsection
EndSection

# The accelerated servers (S3, Mach32, Mach8, 8514, P9000, AGX, W32, Mach64)

Section "Screen"
    Driver      "accel"
    Device      "Mebius-SVGA"
    Monitor     "Mebius-LCD"
    Subsection "Display"
        Depth       8
        Modes       "800x600" "640x480"
        ViewPort    0 0
        Virtual     1152 900
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes       "800x600" "640x480"
        ViewPort    0 0
        Virtual     800 600
    EndSubsection
    Subsection "Display"
        Depth       32
        Modes       "640x400"
        ViewPort    0 0
        Virtual     640 400
    EndSubsection
EndSection
