From owner-FreeBSD-users-jp@jp.FreeBSD.org Thu Dec 26 04:37:27 2002
Received: (from daemon@localhost)
	by castle.jp.FreeBSD.org (8.11.6+3.4W/8.11.3) id gBPJbRr90133;
	Thu, 26 Dec 2002 04:37:27 +0900 (JST)
	(envelope-from owner-FreeBSD-users-jp@jp.FreeBSD.org)
Received: from t-mta4.odn.ne.jp (mfep4.odn.ne.jp [143.90.131.182])
	by castle.jp.FreeBSD.org (8.11.6+3.4W/8.11.3) with ESMTP/inet id gBPJbR290128
	for <FreeBSD-users-jp@jp.freebsd.org>; Thu, 26 Dec 2002 04:37:27 +0900 (JST)
	(envelope-from wnabe@par.odn.ne.jp)
Received: from nike ([211.121.58.218]) by t-mta4.odn.ne.jp with SMTP
          id <20021225193725468.QARA.26728.t-mta4.odn.ne.jp@mta4.odn.ne.jp>
          for <FreeBSD-users-jp@jp.freebsd.org>;
          Thu, 26 Dec 2002 04:37:25 +0900
Message-ID: <0b1801c2ac4d$0d50e5e0$2a01a8c0@private>
From: "Hirokazu WATANABE" <wnabe@par.odn.ne.jp>
To: <FreeBSD-users-jp@jp.FreeBSD.org>
MIME-Version: 1.0
Content-Type: text/plain;
	charset="iso-2022-jp"
Content-Transfer-Encoding: 7bit
X-Priority: 3
X-MSMail-Priority: Normal
X-Mailer: Microsoft Outlook Express 6.00.2800.1106
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1106
Reply-To: FreeBSD-users-jp@jp.FreeBSD.org
Precedence: list
Date: Thu, 26 Dec 2002 04:37:21 +0900
X-Sequence: FreeBSD-users-jp 72669
Subject: [FreeBSD-users-jp 72669] ata write failed...
Errors-To: owner-FreeBSD-users-jp@jp.FreeBSD.org
Sender: owner-FreeBSD-users-jp@jp.FreeBSD.org
X-Originator: wnabe@par.odn.ne.jp
X-Distribute: distribute version 2.1 (Alpha) patchlevel 24e+021225

$BEOJU$G$9!#(B

$B2HDmFb%5!<%P$H$7$F$$$k%^%7%s$N%G%#%9%/$r8r49$7$h$&$H$7$F$$$k$N$G$9$,!"(B
$B$J$<$+$&$^$/$$$-$^$;$s!#%"%I%P%$%9$r$$$?$@$1$J$$$G$7$g$&$+!#(B

FreeBSD 4.7-RELEASE (4.4-RELEASE$B$G$bF1MM$G$7$?(B)
MainBoard: $BITL@(B (440FX?)
atapci0: $B%*%s%\!<%I(BATA (ata0,1)
atapci1: Promise Ultra100 (ata2,3)
atapci2: Promise Ultra100 (ata4,5; $B:#2sA}@_(B)
ata0-master: [ad0]  QUANTUM FIREBALL SE2.1A
ata1-master: [acd0] ATAPI DVD-ROM
ata2-master: [ad4]  IBM DTLA-305040
ata2-slave:  [ad5]  IBM DTLA-305040
ata3-master: [ad6]  IBM DTLA-305040
ata4-master: [ad8]  IBM IC35L120AVV207-0 ($B:#2sA}@_(B)
ata5-master: [ad10] IBM IC35L120AVV207-0 ($B:#2sA}@_(B)

$BBg$-$J%U%!%$%k(B($BLs(B40GB)$B$r(B ad8 $B$K=q$3$&$H$9$k$H!"%3%^%s%IH/9TD>8e$+$i(B

ad8: WRITE command timeout tag=0 serv=0 - resetting
ata4: resetting devices .. ata4: mask=03 ostat0=58 ostat2=00
ad8: ATAPI 00 00
ata4-slave: ATAPI 00 00
ata4: mask=03 stat0=50 stat1=00
ad8: ATA 01 a5
ata4: devices=01
ad8: success setting UDMA5 on Promise chip
done
...

$B$H7+$jJV$5$l!"$=$N$&$A%O%s%0%"%C%W$7$F$7$^$$$^$9!#FI$_9~$`$N$OLdBj$J$$(B
$B$h$&$G!"5/F0;~$N(B fsck $B$d(B dd $B$G$NFI$_=P$7$O@5>o$=$&$G$9!#8=:_$N(B ata $B4XO"(B
$B%Q%i%a!<%?$O(B

hw.ata.ata_dma: 1
hw.ata.wc: 0
hw.ata.tags: 0
hw.ata.atapi_dma: 0

$B$H$J$C$F$$$^$9!#(Bwc=1 $B$N;~$O(B $B%O%s%0%"%C%W(B/$B>!<j$K%j%V!<%H(B $B$NH/@8$,Aa$^$k(B
$B$h$&$J5$$,$7$^$9!#(BPIO $B%b!<%I$K$9$k$H%O%s%0%"%C%W$9$k$3$H$J$/@5>o$KF0:n(B
$B$9$k$h$&$J$N$G$9$,!"@-G=$,Ls(B 1/20 $B$K$J$k$N$G=PMh$l$PHr$1$?$$$G$9!#(B
$B$J$*EE8;MFNLITB-$N2DG=@-$O$"$j$^$9$,!"(Bata4-ata6 $B$N(B 3$BBf$r<h$j30$7$?>uBV(B
(atapci1$B$OA^$7$?$^$^(B)$B$G$bF1>I>u$G$7$?$N$G!"$3$A$i$N2DG=@-$ODc$$$N$G$O(B
$B$J$$$+$H;W$C$F$$$^$9!#(B

$BD9$/$J$j$^$9$,(B boot -v $B$N(B dmesg $B$r0J2<$KIU$1$F$*$-$^$9!#(B

Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 4.7-RELEASE #0: Wed Oct  9 15:08:34 GMT 2002
    root@builder.freebsdmall.com:/usr/obj/usr/src/sys/GENERIC
Calibrating clock(s) ... TSC clock: 199464879 Hz, i8254 clock: 1193378 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254"  frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Pentium Pro (199.43-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x619  Stepping = 9
  Features=0xf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV>
real memory  = 201326592 (196608K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009ffff, 651264 bytes (159 pages)
0x00536000 - 0x0bff7fff, 195829760 bytes (47810 pages)
avail memory = 190590976 (186124K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00faf60
bios32: Entry = 0xfb360 (c00fb360)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xb390
pnpbios: Found PnP BIOS data at 0xc00fc060
pnpbios: Entry = f0000:c088  Rev = 1.0
Other BIOS signatures found:
ACPI: 00000000
Preloaded elf kernel "kernel" at 0xc050f000.
Pentium Pro MTRR support enabled
Creating DISK md0
md0: Malloc disk
Math emulator present
pci_open(1):    mode 1 addr port (0x0cf8) is 0x8000005c
pci_open(1a):   mode1res=0x80000000 (0x80000000)
pci_cfgcheck:   device 0 [class=060000] [hdr=00] is there (id=12378086)
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
found-> vendor=0x8086, dev=0x1237, revid=0x02
        class=06-00-00, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
found-> vendor=0x8086, dev=0x7000, revid=0x01
        class=06-01-00, hdrtype=0x00, mfdev=1
        subordinatebus=0        secondarybus=0
found-> vendor=0x8086, dev=0x7010, revid=0x00
        class=01-01-80, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        map[20]: type 1, range 32, base 0000f000, size  4
found-> vendor=0x5333, dev=0x8811, revid=0x54
        class=03-00-00, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        intpin=a, irq=11
        map[10]: type 1, range 32, base e0000000, size 26
found-> vendor=0x105a, dev=0x4d30, revid=0x02
        class=01-80-00, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        intpin=a, irq=10
        map[10]: type 1, range 32, base 00009100, size  3
        map[14]: type 1, range 32, base 00009200, size  2
        map[18]: type 1, range 32, base 00009300, size  3
        map[1c]: type 1, range 32, base 00009400, size  2
        map[20]: type 1, range 32, base 00009500, size  6
        map[24]: type 1, range 32, base e4000000, size 17
found-> vendor=0x10b7, dev=0x9200, revid=0x78
        class=02-00-00, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        intpin=a, irq=9
        map[10]: type 1, range 32, base 00009600, size  7
        map[14]: type 1, range 32, base e4040000, size  7
found-> vendor=0x105a, dev=0x4d30, revid=0x02
        class=01-80-00, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        intpin=a, irq=12
        map[10]: type 1, range 32, base 00009700, size  3
        map[14]: type 1, range 32, base 00009800, size  2
        map[18]: type 1, range 32, base 00009900, size  3
        map[1c]: type 1, range 32, base 00009a00, size  2
        map[20]: type 1, range 32, base 00009b00, size  6
        map[24]: type 1, range 32, base e4020000, size 17
pci0: <PCI bus> on pcib0
isab0: <Intel 82371SB PCI to ISA bridge> at device 7.0 on pci0
        I/O Recovery Timing: 8-bit 3 clocks, 16-bit 2 clocks
        Extended BIOS: disabled
        Lower BIOS: disabled
        Coprocessor IRQ13: enabled
        Mouse IRQ12: disabled
        Interrupt Routing: A: IRQ11, B: IRQ10, C: IRQ9, D: IRQ12
                MB0: IRQ15, MB1:
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 ATA controller> port 0xf000-0xf00f at device 7.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xf000
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI 00 00
ata0-slave: ATAPI 00 00
ata0: mask=03 stat0=50 stat1=00
ata0-master: ATA 01 a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xf008
ata1: mask=01 ostat0=00 ostat2=ff
ata1-master: ATAPI 14 eb
ata1: mask=01 stat0=00 stat1=00
ata1: devices=04
ata1: at 0x170 irq 15 on atapci0
pci0: <S3 Trio graphics accelerator> (vendor=0x5333, dev=0x8811) at 8.0 irq 11
atapci1: <Promise ATA100 controller> port 0x9500-0x953f,0x9400-0x9403,0x9300-0x9307,0x9200-0x9203,0x9100-0x9107 mem 0xe4000000-0xe401ffff irq 10 at device 9.0 on pci0
ata-: ata2 exists, using next available unit number
ata2: iobase=0x9100 altiobase=0x9202 bmaddr=0x9500
ata2: mask=03 ostat0=50 ostat2=50
ata2-master: ATAPI 00 00
ata2-slave: ATAPI 00 00
ata2: mask=03 stat0=50 stat1=50
ata2-master: ATA 01 a5
ata2-slave: ATA 01 a5
ata2: devices=03
ata2: at 0x9100 on atapci1
ata3: iobase=0x9300 altiobase=0x9402 bmaddr=0x9508
ata3: mask=03 ostat0=50 ostat2=00
ata3-master: ATAPI 00 00
ata3-slave: ATAPI 00 00
ata3: mask=03 stat0=50 stat1=00
ata3-master: ATA 01 a5
ata3: devices=01
ata3: at 0x9300 on atapci1
        using shared irq10.
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0x9600-0x967f mem 0xe4040000-0xe404007f irq 9 at device 10.0 on pci0
xl0: Ethernet address: 00:01:03:dd:50:97
xl0: media options word: a
xl0: found MII/AUTO
miibus0: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: OUI 0x00105a, model 0x0000, rev. 0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: xl0 attached
atapci2: <Promise ATA100 controller> port 0x9b00-0x9b3f,0x9a00-0x9a03,0x9900-0x9907,0x9800-0x9803,0x9700-0x9707 mem 0xe4020000-0xe403ffff irq 12 at device 11.0 on pci0
ata-: ata2 exists, using next available unit number
ata-: ata2 exists, using next available unit number
ata4: iobase=0x9700 altiobase=0x9802 bmaddr=0x9b00
ata4: mask=03 ostat0=50 ostat2=00
ata4-master: ATAPI 00 00
ata4-slave: ATAPI 00 00
ata4: mask=03 stat0=50 stat1=00
ata4-master: ATA 01 a5
ata4: devices=01
ata4: at 0x9700 on atapci2
ata5: iobase=0x9900 altiobase=0x9a02 bmaddr=0x9b08
ata5: mask=03 ostat0=50 ostat2=00
ata5-master: ATAPI 00 00
ata5-slave: ATAPI 00 00
ata5: mask=03 stat0=50 stat1=00
ata5-master: ATA 01 a5
ata5: devices=01
ata5: at 0x9900 on atapci2
        using shared irq12.
ex_isa_identify()
ata-: ata0 exists, using next available unit number
ata-: ata1 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc9fff,0xca000-0xcdfff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata6 failed to probe at port 0x1f0 irq 14 on isa0
ata7 failed to probe at port 0x170 irq 15 on isa0
adv0 failed to probe on isa0
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x330
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x334
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x230
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x234
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x130
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x134
bt0 failed to probe at port 0x134-0x137 on isa0
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0 failed to probe at port 0x134-0x137 on isa0
aic0 failed to probe at port 0x140-0x15f on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0047
psm0: failed to reset the aux device.
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: irq maps: 0x41 0x41 0x41 0x41
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
ed0 failed to probe at port 0x280-0x29f iomem 0xd8000 irq 10 on isa0
fe0 failed to probe at port 0x300-0x31f on isa0
ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0
lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0
cs0 failed to probe at port 0x300-0x31f on isa0
sn0 failed to probe at port 0x300-0x30f irq 10 on isa0
isa_probe_children: probing PnP devices
BIOS Geometries:
 0:03fd3f3f 0..1021=1022 cylinders, 0..63=64 heads, 1..63=63 sectors
 1:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
 2:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
 3:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
 4:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
 5:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
 0 accounted for
Device configuration finished.
bpf: faith0 attached
bpf: lo0 attached
bpf: ppp0 attached
new masks: bio 68d440, tty 630012, net 670212
bpf: sl0 attached
ad0: success setting WDMA2 on Intel chip
Creating DISK ad0
ar: FreeBSD check1 failed
ad0: <QUANTUM FIREBALL SE2.1A/API.0A00> ATA-3 disk at ata0-master
ad0: 2014MB (4124736 sectors), 4092 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, WDMA2
ad0: piomode=4 dmamode=2 udmamode=2 cblid=0
ad4: success setting UDMA5 on Promise chip
Creating DISK ad4
ar: Promise check1 failed
ad4: <IBM-DTLA-305040/TW4OA60A> ATA-5 disk at ata2-master
ad4: 39266MB (80418240 sectors), 79780 C, 16 H, 63 S, 512 B
ad4: 16 secs/int, 1 depth queue, UDMA100
ad4: piomode=4 dmamode=2 udmamode=5 cblid=1
ad5: success setting UDMA5 on Promise chip
Creating DISK ad5
ar: Promise check1 failed
ad5: <IBM-DTLA-305040/TW4OA60A> ATA-5 disk at ata2-slave
ad5: 39266MB (80418240 sectors), 79780 C, 16 H, 63 S, 512 B
ad5: 16 secs/int, 1 depth queue, UDMA100
ad5: piomode=4 dmamode=2 udmamode=5 cblid=1
ad6: success setting UDMA5 on Promise chip
Creating DISK ad6
ar: Promise check1 failed
ad6: <IBM-DTLA-305040/TW4OA60A> ATA-5 disk at ata3-master
ad6: 39266MB (80418240 sectors), 79780 C, 16 H, 63 S, 512 B
ad6: 16 secs/int, 1 depth queue, UDMA100
ad6: piomode=4 dmamode=2 udmamode=5 cblid=1
ad8: success setting UDMA5 on Promise chip
Creating DISK ad8
ar: Promise check1 failed
ad8: <IC35L120AVV207-0/V24OA63A> ATA-6 disk at ata4-master
ad8: 117800MB (241254720 sectors), 239340 C, 16 H, 63 S, 512 B
ad8: 16 secs/int, 1 depth queue, UDMA100
ad8: piomode=4 dmamode=2 udmamode=5 cblid=1
ad10: success setting UDMA5 on Promise chip
Creating DISK ad10
ar: Promise check1 failed
ad10: <IC35L120AVV207-0/V24OA63A> ATA-6 disk at ata5-master
ad10: 117800MB (241254720 sectors), 239340 C, 16 H, 63 S, 512 B
ad10: 16 secs/int, 1 depth queue, UDMA100
ad10: piomode=4 dmamode=2 udmamode=5 cblid=1
ata1-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1
ata1-master: success setting PIO4 on generic chip
acd0: <ATAPI DVD-ROM/0.89> DVD-ROM drive at ata1 as master
acd0: read 1378KB/s (36026KB/s), 512KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, DVD-ROM, DVD-R, packet
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
Mounting root from ufs:/dev/ad0s1a
ad0s1: type 0xa5, start 63, end = 3068351, size 3068289 : OK
ad0s2: type 0xa5, start 3068352, end = 4124735, size 1056384 : OK
start_init: trying /sbin/init
ad8s1: type 0xa5, start 63, end = 241248104, size 241248042 : OK
ad10s1: type 0xa5, start 63, end = 241248104, size 241248042 : OK
ad4s1: type 0xa5, start 63, end = 80405324, size 80405262 : OK
ad5s1: type 0xa5, start 63, end = 80405324, size 80405262 : OK
ad8s1: type 0xa5, start 63, end = 241248104, size 241248042 : OK
ad10s1: type 0xa5, start 63, end = 241248104, size 241248042 : OK

# pciconf -lv
chip0@pci0:0:0: class=0x060000 card=0x00000000 chip=0x12378086 rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82440/1FX 440FX (Natoma) System Controller'
    class    = bridge
    subclass = HOST-PCI
isab0@pci0:7:0: class=0x060100 card=0x00000000 chip=0x70008086 rev=0x01 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82371SB PIIX3 PCI-to-ISA Bridge (Triton II)'
    class    = bridge
    subclass = PCI-ISA
atapci0@pci0:7:1:       class=0x010180 card=0x00000000 chip=0x70108086 rev=0x00 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82371SB PIIX3 IDE Interface (Triton II)'
    class    = mass storage
    subclass = ATA
none0@pci0:8:0: class=0x030000 card=0x00000000 chip=0x88115333 rev=0x54 hdr=0x00
    vendor   = 'S3 Incorporated'
    device   = '86C732 Trio32, 86C764 Trio64, 86C765 Trio64V+ Rev 01'
    class    = display
    subclass = VGA
atapci1@pci0:9:0:       class=0x018000 card=0x4d33105a chip=0x4d30105a rev=0x02 hdr=0x00
    vendor   = 'Promise Technology'
    device   = 'PDC20267 FastTrack100 EIDE Controller'
    class    = mass storage
xl0@pci0:10:0:  class=0x020000 card=0x100010b7 chip=0x920010b7 rev=0x78 hdr=0x00
    vendor   = '3COM Corp, Networking Division'
    device   = '3C905C-TX Fast EtherLink for PC Management NIC'
    class    = network
    subclass = ethernet
atapci2@pci0:11:0:      class=0x018000 card=0x4d33105a chip=0x4d30105a rev=0x02 hdr=0x00
    vendor   = 'Promise Technology'
    device   = 'PDC20267 FastTrack100 EIDE Controller'
    class    = mass storage

# pciconf -r -b pci0:9:0 13
0x00000020
# pciconf -r -b pci0:11:0 13
0x00000020

---
$BEOJU9@OB(B $B!wI\Cf(B
<wnabe@par.odn.ne.jp>
$B$"!"(Bsuperblock$BHt$s$@!D!#(B

