I.   ABOUT

   dvd::rip is a full featured DVD copy program written in Perl. It
   provides an easy to use but feature-rich Gtk+ GUI to control almost
   all aspects of the ripping and transcoding process. It uses the widely
   known video processing swissknife transcode and many other Open Source
   tools. dvd::rip itself is licensed under GPL / Perl Artistic License.

             "And note: it's spelt dvd::rip, and nothing else."

II.  NOTE

   This README is automatically generated from the same sources which
   are used for the dvd::rip homepage. You'll allways get the latest
   news and information from the homepage.
   
     http://www.exit1.org/dvdrip/
   
   Also the homepage contains an extensive user documentation for
   standard and cluster mode, with screenshots, diagrams and more.
   This README covers only the installation not the usage of dvd::rip.
   
III. DOCUMENTATION

1. Installation
     _________________________________________________________________

     * 1.1 Binary distributions

     * 1.1.1 Debian packages
     * 1.1.2 SuSE packages
     * 1.1.3 Mandrake packages
     * 1.1.4 RedHat packages
     * 1.1.5 gentoo packages
     * 1.1.6 FreeBSD port
     * 1.1.7 OpenBSD port

     1.2 Source download
     * 1.2.1 dvd::rip tarball download
     * 1.2.2 CVS access

     1.3 Requirements
     * 1.3.1 External command line tools
     * 1.3.2 Perl 5.6.0 or better
     * 1.3.3 Perl modules
     * 1.3.4 rar (for vobsub compression)

     1.4 Install from source
     * 1.4.1 Install dvd::rip
     * 1.4.2 Update dvd::rip
     * 1.4.3 Multiple dvd::rip versions in parallel

     1.5 Uninstall dvd::rip

     1.6 Download this documentation
     _________________________________________________________________

   This chapter describes how you can get and install dvd::rip. You can
   try one of the several binary distributions or install it from the
   source.

1.1 Binary distributions

   Installation of dvd::rip isn't that hard, but fulfilling the
   requirements actually is (simply because there are a lot ;). So you
   should first try a binary installation using the package manager of
   your Linux distribution. This should track all dependencies
   automatically and speed up things significantly.

1.1.1 Debian packages

   Christian Marillat builds video related Debian packages and publishes
   them on his website http://www.debian-multimedia.org. You can use
   apt-get to install the packages if you add one of the following
   entries (depending on your distribution) to your /etc/apt/sources.list
   file:

deb http://www.debian-multimedia.org sarge main
deb http://www.debian-multimedia.org etch main
deb http://www.debian-multimedia.org sid main
deb http://www.debian-multimedia.org experimental main

   You will find all packages to compile transcode on your own (if you
   need always the very latest versions), or can get binaries of
   reasonably recent transcode versions directly. The same applies to
   dvd::rip.

   The dvd::rip package is called dvdrip.

1.1.2 SuSE packages

   On packman.links2linux.org you find several video related RPM's,
   including dvd::rip and transcode:

     dvd::rip at packman.links2linux.org
     http://packman.links2linux.org/ homepage

1.1.3 Mandrake packages

   Mandrake users can get actual dvd::rip and transcode RPM's from the
   Penguin Liberation Front lair.

     http://plf.zarb.org/

1.1.4 RedHat packages

   Matthias Saou does a great job in building dvd::rip and other
   multimedia related packages. You can find them at freshrpms.net. This
   is a direct link the dvd::rip package:

     http://freshrpms.net/rpm/perl-Video-DVDRip

1.1.5 gentoo packages

   You can get dvd::rip and transcode from the official gentoo package
   repository:

     http://packages.gentoo.org/search/?sstring=dvdrip

1.1.6 FreeBSD port

   dvd::rip is available in the FreeBSD ports collection. To install from
   source, cd to ${PORTSDIR}/multimedia/dvdrip and type 'make install
   clean'. To install a binary package of the port, type 'pkg_add -r
   dvdrip'. Note however that the default installation of the transcode
   port which dvd::rip depends on is very minimalistic, it is recommended
   to look at the Makefile of the transcode port, enable all the options
   you need for dvd::rip and install the transcode port from source.
   Thanks to Michael Nottebrock, who maintains the FreeBSD port.

1.1.7 OpenBSD port

   Since June 2004 we have also an official OpenBSD port of dvd::rip. You
   find it under graphics/dvdrip. Thanks to the maintainer Waldemar
   Brodkorb.

1.2 Source download

1.2.1 dvd::rip tarball download

   You can download dvd::rip sources from this server or all stable
   releases from any CPAN mirror.

   Local download of the latest stable release: (currently no unstable
   release available)

     dvdrip-0.98.5.tar.gz
     dvdrip-0.98.5.tar.gz.asc (GnuPG signature, get key)

   CPAN download directory: (list of mirrors)

     http://www.cpan.org/modules/by-authors/id/J/JR/JRED/

   You can download older versions from here:

     http://www.exit1.org/dvdrip/dist/
     http://www.exit1.org/dvdrip/dist/pre/

   This is a directory, which contains several user contributed files,
   you probably find useful:

     http://www.exit1.org/dvdrip/contrib/

1.2.2 CVS access

   This is mainly intended for developers and CVS experienced users. This
   CVS repository is only a read only mirror of my main repository. It's
   updated manually when I publish releases or pre-releases, so there is
   no advantage for normal users compared to downloading the tar balls
   (besides making it easier using "cvs update" ;)

   Since development of dvd::rip is divided into two branches, you get
   the current (unstable) version, if you don't specifiy a release tag.
   If you want to access a stable version, add -r rel-MAJOR-MINOR-PATCH
   to your cvs checkout command (example: for 0.48.5 this is -r
   rel-0-48-5). If you always want to have the latest stable patch
   release, use -r rel-MAJOR-MINOR-patches (e.g. -r rel-0-50-patches).
   All subsequent updates will stay on this branch (here: 0.50). The
   easiest way of switching to another branch is creating a new checkout
   using the corresponding release tag.

   Root                            Module Unstable tag Stable tag
   :pserver:cvs@cvs.exit1.org:/cvs dvdrip none         rel-MAJOR-MINOR-PATCH

1.2.2.1 CVS examples

   Log into CVS server with:

cvs -z3 -d :pserver:cvs@cvs.exit1.org:/cvs login

          (Press ENTER for password)

   Checkout latest version of the actual stable branch (here 0.50.x):

cvs -z3 -d :pserver:cvs@cvs.exit1.org:/cvs checkout -r rel-0-50-patches dvdrip

   Checkout a specific stable/bugfix version (here 0.50.13) with:

cvs -z3 -d :pserver:cvs@cvs.exit1.org:/cvs checkout -r rel-0-50-13 dvdrip

   Checkout the current development version with:

cvs -z3 -d :pserver:cvs@cvs.exit1.org:/cvs checkout dvdrip

   Update a checkout - created using one of the commands above - with:

cd dvdrip; cvs -z3 update

1.3 Requirements

   dvd::rip is a Gtk+ based program written in Perl, using the video
   processing tool transcode and many other tools for the internals. So
   you first have to get some prerequisites before installing dvd::rip.

   dvd::rip expects all command line tools mentioned here to be found in
   the standard search PATH.

1.3.1 External command line tools

   This table gives a brief overview of the tools used by dvd::rip
   (everything but the Perl modules - see the chapters below for more
   information about them). Most tools are optional - the corresponding
   dvd::rip modules are just switched off, if you don't have them.

   But you need at least the tools marked mandatory, otherwise dvd::rip
   will complain with an error message on startup. You can get also a
   dvd::rip window listing this information, refer to the corresponding
   chapter in the documentation for details.

   Tool Comment Mandatory Suggested Minimum Maximum
   transcode dvd::rip is nothing without transcode Yes 1.0.2 0.6.14 -
   ImageMagick Needed for preview image processing Yes 6.2.3 4.0.0 -
   ffmpeg FFmpeg video converter command line program No 0 -
   xvid4conf xvid4 configuration tool No 1.12 1.6 -
   subtitle2pgm Needed for subtitles No 0.3 0.3 -
   lsdvd Needed for faster DVD TOC reading No 0.15 0.15 -
   rar Needed for compressed vobsub subtitles No 2.71 2.71 2.99
   mplayer Needed for subtitle vobsub viewing No 1.00 0.90 -
   ogmtools Needed for OGG/Vorbis No 1.5 1.0.0 -
   dvdxchap For chapter progress bar (ogmtools) No 1.5 1.0.0 -
   mjpegtools Needed for (S)VCD encoding No 1.6.2 1.6.0 -
   xine Can be used to view DVD's/files No 0.9.15 0.9.13 -
   fping Only for cluster mode master No 2.4 2.2 -
   hal Used for DVD device scanning No 0.5.7 0.5 -

1.3.2 Perl 5.6.0 or better

   You need a recent Perl version on your system. Perl 5.8.x is
   recommended, 5.6.0 and 5.6.1 should work also. dvd::rip won't start
   with Perl versions prior to 5.6.0. Actual distributions ship minimum
   5.6.1, so this shouldn't be a real problem, anyway.

1.3.3 Perl modules

   Since dvd::rip is mostly written in Perl it requires a bunch of Perl
   modules. Check if your distribution has installation packages for
   them, otherwise download them from CPAN and install from source.

   Some required Perl modules are shipped with dvd::rip for your
   convenience. These are pure Perl modules which need no C-Compiler or
   something like that for installation. dvd::rip detects if these
   modules are missing on your system and installs them together with its
   own program files. Refer to the Install from source chapter for
   details about this mechanism.

   This table lists all Perl modules, usual names for installation
   packages and CPAN URL's for download:

   Perl Module Package name CPAN URL Shipped with dvd::rip
   Gtk2 libgtk2-perl search.cpan.org No
   Event libevent-perl search.cpan.org No
   Locale::TextDomain libintl-perl-xs search.cpan.org No
   Gtk2::Ex::FormFactory libgtk2-ex-formfactory-perl search.cpan.org Yes
   AnyEvent libanyevent-perl search.cpan.org Yes
   Event::ExecFlow libevent-execflow-perl search.cpan.org Yes
   Event::RPC libevent-rpc-perl search.cpan.org Yes

   To install a Perl module from source, execute these commands:

tar xfz Some-Perl-Module-x.xx.tar.gz
cd Some-Perl-Module-x.xx
perl Makefile.PL
make test
sudo make install

1.3.4 rar (for vobsub compression)

   Some special notes about the rar program. MPlayer supports vobsub
   files compressed with rar, but you need a 2.x version, 3.x and higher
   doesn't work. You can get a 2.x version locally from here:

     http://www.exit1.org/dvdrip/contrib/rarlnx271.sfx.bin

   I suggest to install the binary to e.g. /usr/local/bin. Then configure
   this path using the Preferences dialog.

1.4 Install from source

1.4.1 Install dvd::rip

   This is quite easy, if you have managed to install the packages
   mentioned above... ;)

   Download the .tar.gz archive of the dvd::rip version you want to
   install. Then extract the file, change into the created directory, and
   execute the Makefile.PL script:

# as a normal user
tar xfz dvdrip-x.xx.tar.gz
cd dvdrip-x.xx
perl Makefile.PL

   As mentioned in the Required Perl modules chapter above dvd::rip can
   install some of the required Perl modules for you automatically. If
   dvd::rip detects such missing modules on your system, you get an
   output like this from perl Makefile.PL:

Note:
-----
The following modules are required for dvd::rip but not found on your
system. They're shipped with dvd::rip for your convenience and will be
installed automatically when you run 'make install':

  AnyEvent Event::ExecFlow Event::RPC

You can ignore the 'prerequisite not found' warnings beyond for them.

If you don't like this and want to install these modules manually
just set SKIP_UNPACK_REQUIRED_MODULES before executing Makefile.PL,
e.g. this way:

  SKIP_UNPACK_REQUIRED_MODULES=1 perl Makefile.PL

Checking if your kit is complete...
Looks good
Warning: prerequisite AnyEvent 1.02 not found.
Warning: prerequisite Event::ExecFlow 0.62 not found.
Warning: prerequisite Event::RPC 0.89 not found.
Writing Makefile for Video::DVDRip

   If your distribution has installation packages for these modules, it's
   recommended to use these. Install them and run 'perl Makefile.PL'
   again.

   Now run 'make test' and if no errors were reported 'make install' (as
   root):

make test
sudo make install

   You can ommit the "make install" step. But then you can execute the
   'dvdrip' binary only from the build directory and you must put
   "$PWD/bin" into your PATH (export PATH=$PWD/bin:$PATH), otherwise
   dvd::rip can't find its files.

1.4.2 Update dvd::rip

   Updating is just like installing. The only thing you should be aware
   of is switching the underlying Perl version. This way you easily can
   get two versions of dvd::rip installed in your system, because
   dvd::rip installs its libraries in your Perl library directory. Such a
   installation mixing isn't recommended unless you know exactly what
   you're doing. So it's better to remove the old version from the old
   Perl directory if you change the Perl version (refer to the uninstall
   chapter for details).
   Read the Changes file!

   I strongly suggest you should read at least the latest change log
   entry of the Changes file, resp. all entries of the versions you
   probably skipped in case of an update. It contains important release
   notes, e.g. about compatibility issues, and all relevant changes from
   release to release.

   Note:
   Changes on the unstable branch are logged in the file
   Changes.unstable.

1.4.3 Multiple dvd::rip versions in parallel

   It's possible to use several dvd::rip versions in parallel on your
   system, but you can install only one version using make install into
   your system directories.

   Just extract another dvd::rip version you want to use somewhere, enter
   the created directory (dvdrip-x.xx) and execute perl Makefile.PL &&
   make here (no make install). Add the actual directory to your PATH
   (export PATH=$PWD/bin:$PATH) and you can start this version with
   bin/dvdrip from this directory. All files and libraries located in the
   actual distribution directory will be used.

tar xvfz dvdrip-x.xx.tar.gz
cd dvdrip-x.xx
perl Makefile.PL && make
export PATH=$PWD/bin:$PATH
bin/dvdrip

1.5 Uninstall dvd::rip

   If you didn't use a package manager to install dvd::rip and you want
   to uninstall it, follow these instructions. This is necessary, if you
   accidentally mixed several versions on your system, which may result
   in a broken dvd::rip at all. In this case best thing is to remove all
   instances and to do a clean installation afterwards.

   dvd::rip mainly consists of a bunch of Perl modules which reside in
   the Perl library directory of your Perl interpreter. Easiest way to
   find this directory is to use the locate program. Then a few
   executables belong to dvd::rip, which also can be found using locate.
   This is an example session of how this works:

% locate DVDRip.pm
/usr/local/share/perl/5.8.0/Video/DVDRip.pm
% rm -r /usr/local/share/perl/5.8.0/Video/DVDRip*
% locate dvdrip
/usr/bin/dvdrip
/usr/bin/dvdrip-exec
/usr/bin/dvdrip-master
...
% rm /usr/bin/dvdrip*

   In words: find a Perl library directory called Video with DVDRip.pm in
   it. Remove the DVDRip.pm file and the subdirectory called DVDRip. Then
   find the location of the binaries and remove them - see the list
   above. If you find multiple instances this way, remove them all.

1.6 Download this documentation

   You can download a static HTML version of this documentation:

     http://www.exit1.org/dvdrip/dist/dvdrip-doc-html-0.98.5.tar.bz2

   A PDF version is also available (generated using the excellent tool
   htmldoc):

     http://www.exit1.org/dvdrip/dist/dvdrip-doc-0.98.5.pdf.bz2
     _________________________________________________________________

IV.  MAILING LIST

   If you want to discuss usage, problems and suggestions with other
   dvd::rip users, you should subscribe to the dvdrip-users mailing list.
   This list is low traffic and announces, patches etc. will be posted
   here, too.

   The language of the mailing list is english.

This is a closed mailing list: subscribe before posting

   The list is closed to prevent members and administrators from getting
   flooded by spam. So you have to subscribe before posting. Postings
   from non subscribed addresses are discarded without notification!

   Important: You must use the sender address, which is subscribed to the
   mailing list, because the list manager has no idea of your alternative
   mail addresses. Postings with unknown sender addresses are discarded
   without notification!

   Before posting any questions or bug reports: please first check the
   [3]documentation, in particular the [4]FAQ.

     * [5]Mailing list subscription
     * [6]Searchable mailing list archive

   The list is registered for reading at [7]gmane.org, a mailing list to
   news gateway, which has a public searchable mailing list archive:
     * [8]Mailing list archive at gmane.org

   Please note, that you can't post to the gmane.comp.video.dvdrip.user
   newsgroup. You must be a regular list member for posting.

   Because dvd::rip is highly transcode related, I suggest subscribing to
   the [9]transcode-user mailing list, too.

   IMPORTANT NOTE:
   Don't post any illegal stuff here, e.g. requesting or offering movie
   downloads or something like this! Members breaking this simple rule
   will be removed immediately.

   Please note: copying encrypted DVD's is illegal in many countries.
   Also it's illegal to provide information about how this could be
   accomplished. So don't send any questions regarding encrypted DVD's or
   DVD cracking tools to the author of dvd::rip or to the dvd::rip
   mailing list. Corresponding mails will be silently ignored,
   correspondent posts will be removed from the mailing list archive
   without notification.

URL References

   1. http://www.exit1.org/dvdrip/list.cipp
   3. http://www.exit1.org/dvdrip/doc/
   4. http://www.exit1.org/dvdrip/doc/faq.cipp
   5. http://lists.exit1.org/mailman/listinfo/dvdrip-users
   6. http://www.exit1.org/archive/dvdrip-users/
   7. http://www.gmane.org/
   8. http://news.gmane.org/thread.php?group=gmane.comp.video.dvdrip.user
   9. http://lists.exit1.org/mailman/listinfo/transcode-users

V.  GETTING HELP

   If you encounter problems, which are not covered by the
   [3]documentation, in particular the [4]FAQ, subscribe to the
   [5]dvdrip-users mailing list and ask your question there (but not
   before you read all information on this page!).

   Eric S. Raymond wrote an excellent article about [6]"How To Ask
   Questions The Smart Way ". You probably want to take a look at it
   before posting ;)

Reporting bugs and suggestions (*please* read this!)

   If you want to send a bug report, patch or feature request, please
   make sure, that you're using the most recent version of dvd::rip (at
   least the latest stable release). Also first check the
   [7]documentation, in particular the [8]FAQ, the [9]ChangeLog and the
   [10]mailing list archive to see, if the bug is reported and probably
   fixed already in the development release. For feature requests, please
   check if it's not already noted on the [11]TODO list. We all know,
   reading documentation is boring, but it saves time ;) Thanks.

   It's really important that you add the following information to your
   bug reports, otherwise you'll likely don't get any helpful answers
   (probably no answer at all, because for most people it's boring to ask
   for this again and again...):
     * a description of how the bug can be reproduced.
     * information about your Linux installation, in particular which
       distribution/version you are using
     * exact versions of all affected packages. That's always dvd::rip
       and transcode, but often a bunch of other packages are important,
       e.g. ogmtools (if it's about ogg/vorbis) or mjpegtools (if it's
       about (S)VCD processing) and so on. You can get a list of most of
       these version numbers by pressing Ctrl+D in the dvd::rip main
       window.
     * information about usage of binary packages or self compiled
       packages. In case of binary packages: from where did you get them.
     * if dvd::rip crashes or it looks like an internal dvd::rip bug and
       not like a bug of external command execution, add the output of
       "perl -V".
     * if a specific command executed by dvd::rip fails, grab the
       corresponding command line from the log and execute it by hand. It
       is important that you add the complete command line and the
       complete command output to your report.

transcode related issues

   If dvd::rip mainly works for you but you encounter problems ripping
   specific DVDs, this is probably a transcode problem. Maybe you want to
   report this directly to the transcode developers resp. to the
   [12]transcode-users list. If you're not sure about this, report the
   problem to the dvdrip-users list, and we'll see, what we can do for
   you. But aware, that you may be pointed to the transcode-users list...
   ;)

Encrypted DVD's

   Please note: copying encrypted DVD's is illegal in many countries.
   Also it's illegal to provide information about how this could be
   accomplished. So don't send any questions regarding encrypted DVD's or
   DVD cracking to the author of dvd::rip or to the dvd::rip mailing
   list. Corresponding mails will be silently ignored, correspondent
   posts will be removed from the mailing list archive without
   notification.

Contribute with patches

   Patches are welcome, preferably unified context diffs created this way
   (if you're familiar with CVS, you should use the [13]CVS repository
   and create patches with CVS):
  cd Video-DVDRip-0.48.2.patched
  make realclean
  cd ..
  diff -urN Video-DVDRip-0.48.2 Video-DVDRip-0.48.2.patched > patchfile.txt

   where Video-DVDRip-0.48.2 is the root directory of the original
   distribution and Video-DVDRip-0.48.2.patched your modified version.
   Without the make realclean all files created during make are added to
   the patch, what's not what we want.

If it simply works

   If dvd::rip works for you without any problems and you like it, don't
   hesitate to drop a mail. Next to all those problem and bug reports
   some positive postings delight every coders heart ;)

Contact the author

   If you don't want to post to the mailing list for some reasons, you
   can contact me by mail. But be aware, that the response time may be
   longer, comparing to a list posting. The address is:
   [14]Jrn Reder <joern AT zyn.de>. Please place the word "dvd::rip"
   somewhere in the subject, in addition to your real topic, because this
   helps me classifying your email correctly. Thanks.

GnuPG Key

   You can send PGP encrytped mails to the author. Please use the
   following key:
   Key ID         285CF473
   Fingerprint    0B9C 37B5 070B 8D87 8851 A703 DA13 62D0 285C F473
   Get it         [15]Fetch from wwwkeys.de.pgp.net

   From 0.50.14 on all dvd::rip releases are signed with this key.

URL References

   1. http://www.exit1.org/dvdrip/support.cipp
   3. http://www.exit1.org/dvdrip/doc/
   4. http://www.exit1.org/dvdrip/doc/faq.cipp
   5. http://www.exit1.org/dvdrip/list.cipp
   6. http://catb.org/~esr/faqs/smart-questions.html
   7. http://www.exit1.org/dvdrip/doc/
   8. http://www.exit1.org/dvdrip/doc/faq.cipp
   9. http://www.exit1.org/dvdrip/changes.cipp
  10. http://www.exit1.org/archive/dvdrip-users/
  11. http://www.exit1.org/dvdrip/todo.cipp
  12. http://lists.exit1.org/mailman/listinfo/transcode-users
  13. http://www.exit1.org/dvdrip/doc/install.cipp#cvs
  14. mailto:?subject=dvd::rip
  15. http://wwwkeys.de.pgp.net:11371/pks/lookup?op=get&search=0x285CF473

VI. CHANGES
   $Id: Changes,v 1.187.2.7 2007/04/14 14:39:04 joern Exp $

   Revision history and release notes for dvd::rip.

   0.98.6 [stable branch] Fri Apr 14 2007, joern
    Features:
    - Swedish and Serbian translation updates.
    
    Bugfixes:
    - Crash on first dvd::rip startup (initial configuration)
      fixed. Thanks for the report to Christian Marillat.

