#include <pcl/surface/3rdparty/opennurbs/opennurbs_nurbssurface.h>

Inheritance diagram for ON_NurbsCage:

Public Member Functions
	ON_NurbsCage ()
	ON_NurbsCage (int dim, bool is_rat, int order0, int order1, int order2, int cv_count0, int cv_count1, int cv_count2)
	ON_NurbsCage (const ON_BoundingBox &bbox, int order0, int order1, int order2, int cv_count0, int cv_count1, int cv_count2)
	ON_NurbsCage (const ON_3dPoint *box_corners, int order0, int order1, int order2, int cv_count0, int cv_count1, int cv_count2)
	ON_NurbsCage (const ON_BezierCage &src)
	~ON_NurbsCage ()
	ON_NurbsCage (const ON_NurbsCage &src)
ON_NurbsCage &	operator= (const ON_NurbsCage &src)
ON_NurbsCage &	operator= (const ON_BezierCage &src)
ON_BOOL32	IsValid (ON_TextLog *text_log=NULL) const
void	Dump (ON_TextLog &text_log) const
unsigned int	SizeOf () const
ON__UINT32	DataCRC (ON__UINT32 current_remainder) const
ON_BOOL32	Read (ON_BinaryArchive &archive)
ON_BOOL32	Write (ON_BinaryArchive &archive) const
ON::object_type	ObjectType () const
void	DestroyRuntimeCache (bool bDelete=true)
int	Dimension () const
ON_BOOL32	GetBBox (double boxmin, double boxmax, int bGrowBox=false) const
bool	GetTightBoundingBox (ON_BoundingBox &tight_bbox, int bGrowBox=false, const ON_Xform *xform=0) const
ON_BOOL32	Transform (const ON_Xform &xform)
bool	IsDeformable () const
bool	MakeDeformable ()
bool	IsParallelogram (double tolerance) const
bool	Create (int dim, bool is_rat, int order0, int order1, int order2, int cv_count0, int cv_count1, int cv_count2)
bool	Create (const ON_BoundingBox &bbox, int order0, int order1, int order2, int cv_count0, int cv_count1, int cv_count2)
bool	Create (const ON_3dPoint *box_corners, int order0, int order1, int order2, int cv_count0, int cv_count1, int cv_count2)
void	Destroy ()
void	EmergencyDestroy ()
ON_Interval	Domain (int) const
bool	Reverse (int dir)
bool	Transpose (int dir0, int dir1)
bool	ClampEnd (int dir, int end)
bool	InsertKnot (int dir, double knot_value, int knot_multiplicity=1)
ON_BOOL32	IncreaseDegree (int dir, int desired_degree)
ON_BOOL32	ChangeDimension (int desired_dimension)
bool	Evaluate (double r, double s, double t, int der_count, int v_stride, double v, int side=0, int hint=0) const
ON_3dPoint	PointAt (double r, double s, double t) const
ON_NurbsSurface *	IsoSurface (int dir, double c, ON_NurbsSurface *srf=0) const
bool	Trim (int dir, const ON_Interval &domain)
bool	Extend (int dir, const ON_Interval &domain)
ON_3dPoint	PointAt (ON_3dPoint rst) const
bool	IsRational () const
int	CVSize () const
int	Order (int dir) const
int	CVCount (int) const
int	CVCount (void) const
int	KnotCount (int dir) const
int	Degree (int dir) const
int	SpanCount (int dir) const
bool	GetSpanVector (int dir, double *span_vector) const
double *	CV (int i, int j, int k) const
ON::point_style	CVStyle () const
double	Weight (int i, int j, int k) const
bool	SetWeight (int i, int j, int k, double w)
bool	SetCV (int i, int j, int k, ON::point_style, const double *)
bool	SetCV (int i, int j, int k, const ON_3dPoint &point)
bool	SetCV (int i, int j, int k, const ON_4dPoint &hpoint)
bool	GetCV (int i, int j, int k, ON::point_style, double *) const
bool	GetCV (int i, int j, int k, ON_3dPoint &) const
bool	GetCV (int i, int j, int k, ON_4dPoint &) const
bool	SetKnot (int dir, int knot_index, double knot_value)
double	Knot (int dir, int knot_index) const
bool	ZeroCVs ()
bool	MakeRational ()
bool	MakeNonRational ()
bool	IsClosed (int) const
bool	IsPeriodic (int) const
bool	IsSingular (int) const
double	GrevilleAbcissa (int dir, int gindex) const
bool	ReserveCVCapacity (int cv_capacity)
bool	ReserveKnotCapacity (int dir, int cv_capacity)
Public Member Functions inherited from ON_Geometry
	ON_Geometry ()
	ON_Geometry (const ON_Geometry &)
ON_Geometry &	operator= (const ON_Geometry &)
virtual	~ON_Geometry ()
ON_BoundingBox	BoundingBox () const
ON_BOOL32	GetBoundingBox (ON_BoundingBox &bbox, int bGrowBox=false) const
ON_BOOL32	GetBoundingBox (ON_3dPoint &bbox_min, ON_3dPoint &bbox_max, int bGrowBox=false) const
ON_BOOL32	Rotate (double sin_angle, double cos_angle, const ON_3dVector &rotation_axis, const ON_3dPoint &rotation_center)
ON_BOOL32	Rotate (double rotation_angle, const ON_3dVector &rotation_axis, const ON_3dPoint &rotation_center)
ON_BOOL32	Translate (const ON_3dVector &translation_vector)
ON_BOOL32	Scale (double scale_factor)
virtual void	ClearBoundingBox ()
virtual ON_BOOL32	SwapCoordinates (int i, int j)
virtual ON_BOOL32	HasBrepForm () const
virtual ON_Brep *	BrepForm (ON_Brep *brep=NULL) const
virtual ON_COMPONENT_INDEX	ComponentIndex () const
virtual bool	EvaluatePoint (const class ON_ObjRef &objref, ON_3dPoint &P) const
Public Member Functions inherited from ON_Object
bool	CopyFrom (const ON_Object *src)
	ON_Object ()
	ON_Object (const ON_Object &)
ON_Object &	operator= (const ON_Object &)
virtual	~ON_Object ()
void	EmergencyDestroy ()
virtual void	MemoryRelocate ()
ON_BOOL32	IsKindOf (const ON_ClassId *pClassId) const
virtual ON_UUID	ModelObjectId () const
bool	SetUserString (const wchar_t key, const wchar_t string_value)
int	SetUserStrings (int count, const ON_UserString *user_strings, bool bReplace)
bool	GetUserString (const wchar_t *key, ON_wString &string_value) const
int	GetUserStrings (ON_ClassArray< ON_UserString > &user_strings) const
int	GetUserStringKeys (ON_ClassArray< ON_wString > &user_string_keys) const
int	UserStringCount () const
ON_BOOL32	AttachUserData (ON_UserData *pUserData)
ON_BOOL32	DetachUserData (ON_UserData *pUserData)
ON_UserData *	GetUserData (const ON_UUID &userdata_uuid) const
void	PurgeUserData ()
ON_UserData *	FirstUserData () const
void	TransformUserData (const ON_Xform &xform)
void	CopyUserData (const ON_Object &source_object)
void	MoveUserData (ON_Object &source_object)

Public Attributes
int	m_dim
bool	m_is_rat
int	m_order [3]
int	m_cv_count [3]
int	m_knot_capacity [3]
double *	m_knot [3]
int	m_cv_stride [3]
int	m_cv_capacity
double *	m_cv

Detailed Description

Definition at line 1028 of file opennurbs_nurbssurface.h.

Constructor & Destructor Documentation

◆ ON_NurbsCage() [1/6]

ON_NurbsCage::ON_NurbsCage ( )

Referenced by ON_NurbsCage(), operator=(), and operator=().

◆ ON_NurbsCage() [2/6]

ON_NurbsCage::ON_NurbsCage	(	int	dim,
		bool	is_rat,
		int	order0,
		int	order1,
		int	order2,
		int	cv_count0,
		int	cv_count1,
		int	cv_count2 )

◆ ON_NurbsCage() [3/6]

ON_NurbsCage::ON_NurbsCage	(	const ON_BoundingBox &	bbox,
		int	order0,
		int	order1,
		int	order2,
		int	cv_count0,
		int	cv_count1,
		int	cv_count2 )

◆ ON_NurbsCage() [4/6]

ON_NurbsCage::ON_NurbsCage	(	const ON_3dPoint *	box_corners,
		int	order0,
		int	order1,
		int	order2,
		int	cv_count0,
		int	cv_count1,
		int	cv_count2 )

◆ ON_NurbsCage() [5/6]

ON_NurbsCage::ON_NurbsCage ( const ON_BezierCage & src )

◆ ~ON_NurbsCage()

ON_NurbsCage::~ON_NurbsCage ( )

◆ ON_NurbsCage() [6/6]

ON_NurbsCage::ON_NurbsCage ( const ON_NurbsCage & src )

References ON_NurbsCage().

Member Function Documentation

◆ ChangeDimension()

ON_BOOL32 ON_NurbsCage::ChangeDimension ( int desired_dimension )

◆ ClampEnd()

bool ON_NurbsCage::ClampEnd	(	int	dir,
		int	end )

◆ Create() [1/3]

bool ON_NurbsCage::Create	(	const ON_3dPoint *	box_corners,
		int	order0,
		int	order1,
		int	order2,
		int	cv_count0,
		int	cv_count1,
		int	cv_count2 )

◆ Create() [2/3]

bool ON_NurbsCage::Create	(	const ON_BoundingBox &	bbox,
		int	order0,
		int	order1,
		int	order2,
		int	cv_count0,
		int	cv_count1,
		int	cv_count2 )

◆ Create() [3/3]

bool ON_NurbsCage::Create	(	int	dim,
		bool	is_rat,
		int	order0,
		int	order1,
		int	order2,
		int	cv_count0,
		int	cv_count1,
		int	cv_count2 )

◆ CV()

double * ON_NurbsCage::CV	(	int	i,
		int	j,
		int	k ) const

◆ CVCount() [1/2]

int ON_NurbsCage::CVCount ( int ) const

◆ CVCount() [2/2]

int ON_NurbsCage::CVCount ( void ) const

◆ CVSize()

int ON_NurbsCage::CVSize ( ) const

◆ CVStyle()

ON::point_style ON_NurbsCage::CVStyle ( ) const

◆ DataCRC()

ON__UINT32 ON_NurbsCage::DataCRC ( ON__UINT32 current_remainder ) const

virtual

Reimplemented from ON_Object.

◆ Degree()

int ON_NurbsCage::Degree ( int dir ) const

◆ Destroy()

void ON_NurbsCage::Destroy ( )

◆ DestroyRuntimeCache()

void ON_NurbsCage::DestroyRuntimeCache ( bool bDelete = true )

virtual

Reimplemented from ON_Object.

◆ Dimension()

int ON_NurbsCage::Dimension ( ) const

virtual

Implements ON_Geometry.

◆ Domain()

ON_Interval ON_NurbsCage::Domain ( int ) const

◆ Dump()

void ON_NurbsCage::Dump ( ON_TextLog & text_log ) const

virtual

Reimplemented from ON_Object.

◆ EmergencyDestroy()

void ON_NurbsCage::EmergencyDestroy ( )

◆ Evaluate()

bool ON_NurbsCage::Evaluate	(	double	r,
		double	s,
		double	t,
		int	der_count,
		int	v_stride,
		double *	v,
		int	side = 0,
		int *	hint = 0 ) const

◆ Extend()

bool ON_NurbsCage::Extend	(	int	dir,
		const ON_Interval &	domain )

◆ GetBBox()

ON_BOOL32 ON_NurbsCage::GetBBox	(	double *	boxmin,
		double *	boxmax,
		int	bGrowBox = false ) const

virtual

Implements ON_Geometry.

◆ GetCV() [1/3]

bool ON_NurbsCage::GetCV	(	int	i,
		int	j,
		int	k,
		ON::point_style	,
		double *	) const

◆ GetCV() [2/3]

bool ON_NurbsCage::GetCV	(	int	i,
		int	j,
		int	k,
		ON_3dPoint &	) const

◆ GetCV() [3/3]

bool ON_NurbsCage::GetCV	(	int	i,
		int	j,
		int	k,
		ON_4dPoint &	) const

◆ GetSpanVector()

bool ON_NurbsCage::GetSpanVector	(	int	dir,
		double *	span_vector ) const

◆ GetTightBoundingBox()

bool ON_NurbsCage::GetTightBoundingBox	(	ON_BoundingBox &	tight_bbox,
		int	bGrowBox = false,
		const ON_Xform *	xform = 0 ) const

virtual

Reimplemented from ON_Geometry.

◆ GrevilleAbcissa()

double ON_NurbsCage::GrevilleAbcissa	(	int	dir,
		int	gindex ) const

◆ IncreaseDegree()

ON_BOOL32 ON_NurbsCage::IncreaseDegree	(	int	dir,
		int	desired_degree )

◆ InsertKnot()

bool ON_NurbsCage::InsertKnot	(	int	dir,
		double	knot_value,
		int	knot_multiplicity = 1 )

◆ IsClosed()

bool ON_NurbsCage::IsClosed ( int ) const

◆ IsDeformable()

bool ON_NurbsCage::IsDeformable ( ) const

virtual

Reimplemented from ON_Geometry.

◆ IsoSurface()

ON_NurbsSurface * ON_NurbsCage::IsoSurface	(	int	dir,
		double	c,
		ON_NurbsSurface *	srf = 0 ) const

◆ IsParallelogram()

bool ON_NurbsCage::IsParallelogram ( double tolerance ) const

◆ IsPeriodic()

bool ON_NurbsCage::IsPeriodic ( int ) const

◆ IsRational()

bool ON_NurbsCage::IsRational ( ) const

◆ IsSingular()

bool ON_NurbsCage::IsSingular ( int ) const

◆ IsValid()

ON_BOOL32 ON_NurbsCage::IsValid ( ON_TextLog * text_log = NULL ) const

virtual

Implements ON_Object.

◆ Knot()

double ON_NurbsCage::Knot	(	int	dir,
		int	knot_index ) const

◆ KnotCount()

int ON_NurbsCage::KnotCount ( int dir ) const

◆ MakeDeformable()

bool ON_NurbsCage::MakeDeformable ( )

virtual

Reimplemented from ON_Geometry.

◆ MakeNonRational()

bool ON_NurbsCage::MakeNonRational ( )

◆ MakeRational()

bool ON_NurbsCage::MakeRational ( )

◆ ObjectType()

ON::object_type ON_NurbsCage::ObjectType ( ) const

virtual

Reimplemented from ON_Object.

◆ operator=() [1/2]

ON_NurbsCage & ON_NurbsCage::operator= ( const ON_BezierCage & src )

References ON_NurbsCage().

◆ operator=() [2/2]

ON_NurbsCage & ON_NurbsCage::operator= ( const ON_NurbsCage & src )

References ON_NurbsCage().

◆ Order()

int ON_NurbsCage::Order ( int dir ) const

◆ PointAt() [1/2]

ON_3dPoint ON_NurbsCage::PointAt	(	double	r,
		double	s,
		double	t ) const

◆ PointAt() [2/2]

ON_3dPoint ON_NurbsCage::PointAt ( ON_3dPoint rst ) const

◆ Read()

ON_BOOL32 ON_NurbsCage::Read ( ON_BinaryArchive & archive )

virtual

Reimplemented from ON_Object.

◆ ReserveCVCapacity()

bool ON_NurbsCage::ReserveCVCapacity ( int cv_capacity )

◆ ReserveKnotCapacity()

bool ON_NurbsCage::ReserveKnotCapacity	(	int	dir,
		int	cv_capacity )

◆ Reverse()

bool ON_NurbsCage::Reverse ( int dir )

◆ SetCV() [1/3]

bool ON_NurbsCage::SetCV	(	int	i,
		int	j,
		int	k,
		const ON_3dPoint &	point )

◆ SetCV() [2/3]

bool ON_NurbsCage::SetCV	(	int	i,
		int	j,
		int	k,
		const ON_4dPoint &	hpoint )

◆ SetCV() [3/3]

bool ON_NurbsCage::SetCV	(	int	i,
		int	j,
		int	k,
		ON::point_style	,
		const double *	)

◆ SetKnot()

bool ON_NurbsCage::SetKnot	(	int	dir,
		int	knot_index,
		double	knot_value )

◆ SetWeight()

bool ON_NurbsCage::SetWeight	(	int	i,
		int	j,
		int	k,
		double	w )

◆ SizeOf()

unsigned int ON_NurbsCage::SizeOf ( ) const

virtual

Reimplemented from ON_Object.

◆ SpanCount()

int ON_NurbsCage::SpanCount ( int dir ) const

◆ Transform()

ON_BOOL32 ON_NurbsCage::Transform ( const ON_Xform & xform )

virtual

Reimplemented from ON_Geometry.

◆ Transpose()

bool ON_NurbsCage::Transpose	(	int	dir0,
		int	dir1 )

◆ Trim()

bool ON_NurbsCage::Trim	(	int	dir,
		const ON_Interval &	domain )

◆ Weight()

double ON_NurbsCage::Weight	(	int	i,
		int	j,
		int	k ) const

◆ Write()

ON_BOOL32 ON_NurbsCage::Write ( ON_BinaryArchive & archive ) const

virtual

Reimplemented from ON_Object.

◆ ZeroCVs()

bool ON_NurbsCage::ZeroCVs ( )

Member Data Documentation

◆ m_cv

double* ON_NurbsCage::m_cv

Definition at line 1726 of file opennurbs_nurbssurface.h.

◆ m_cv_capacity

int ON_NurbsCage::m_cv_capacity

Definition at line 1725 of file opennurbs_nurbssurface.h.

◆ m_cv_count

int ON_NurbsCage::m_cv_count[3]

Definition at line 1721 of file opennurbs_nurbssurface.h.

◆ m_cv_stride

int ON_NurbsCage::m_cv_stride[3]

Definition at line 1724 of file opennurbs_nurbssurface.h.

◆ m_dim

int ON_NurbsCage::m_dim

Definition at line 1718 of file opennurbs_nurbssurface.h.

◆ m_is_rat

bool ON_NurbsCage::m_is_rat

Definition at line 1719 of file opennurbs_nurbssurface.h.

◆ m_knot

double* ON_NurbsCage::m_knot[3]

Definition at line 1723 of file opennurbs_nurbssurface.h.

◆ m_knot_capacity

int ON_NurbsCage::m_knot_capacity[3]

Definition at line 1722 of file opennurbs_nurbssurface.h.

◆ m_order

int ON_NurbsCage::m_order[3]

Definition at line 1720 of file opennurbs_nurbssurface.h.

The documentation for this class was generated from the following file:

pcl/surface/3rdparty/opennurbs/opennurbs_nurbssurface.h

Public Member Functions

Public Attributes

Detailed Description

Constructor & Destructor Documentation

◆ ON_NurbsCage() [1/6]

◆ ON_NurbsCage() [2/6]

◆ ON_NurbsCage() [3/6]

◆ ON_NurbsCage() [4/6]

◆ ON_NurbsCage() [5/6]

◆ ~ON_NurbsCage()

◆ ON_NurbsCage() [6/6]

Member Function Documentation

◆ ChangeDimension()

◆ ClampEnd()

◆ Create() [1/3]

◆ Create() [2/3]

◆ Create() [3/3]

◆ CV()

◆ CVCount() [1/2]

◆ CVCount() [2/2]

◆ CVSize()

◆ CVStyle()

◆ DataCRC()

◆ Degree()

◆ Destroy()

◆ DestroyRuntimeCache()

◆ Dimension()

◆ Domain()

◆ Dump()

◆ EmergencyDestroy()

◆ Evaluate()

◆ Extend()

◆ GetBBox()

◆ GetCV() [1/3]

◆ GetCV() [2/3]

◆ GetCV() [3/3]

◆ GetSpanVector()

◆ GetTightBoundingBox()

◆ GrevilleAbcissa()

◆ IncreaseDegree()

◆ InsertKnot()

◆ IsClosed()

◆ IsDeformable()

◆ IsoSurface()

◆ IsParallelogram()

◆ IsPeriodic()

◆ IsRational()

◆ IsSingular()

◆ IsValid()

◆ Knot()

◆ KnotCount()

◆ MakeDeformable()

◆ MakeNonRational()

◆ MakeRational()

◆ ObjectType()

◆ operator=() [1/2]

◆ operator=() [2/2]

◆ Order()

◆ PointAt() [1/2]

◆ PointAt() [2/2]

◆ Read()

◆ ReserveCVCapacity()

◆ ReserveKnotCapacity()

◆ Reverse()

◆ SetCV() [1/3]

◆ SetCV() [2/3]

◆ SetCV() [3/3]

◆ SetKnot()

◆ SetWeight()

◆ SizeOf()

◆ SpanCount()

◆ Transform()

◆ Transpose()

◆ Trim()

◆ Weight()

◆ Write()

◆ ZeroCVs()

Member Data Documentation

◆ m_cv

◆ m_cv_capacity