#! /usr/pkg/bin/bash
##
## Copyright (C) by Argonne National Laboratory
##     See COPYRIGHT in top-level directory
##

# Simple script to compile and/or link MPI programs.
# This script knows the default flags and libraries, and can handle
# alternative C++ compilers and the associated flags and libraries.
# The important terms are:
#    includedir, libdir - Directories containing an *installed* mpich
#    prefix, execprefix - Often used to define includedir and libdir
#    CXX                - C compiler
#    WRAPPER_CXXFLAGS      - Any special flags needed to compile 
#    WRAPPER_LDFLAGS       - Any special flags needed to link
#    WRAPPER_LIBS          - Any special libraries needed in order to link
#    
# We assume that (a) the C++ compiler can both compile and link programs
#
# Handling of command-line options:
#   This is a little tricky because some options may contain blanks.
#
# Special issues with shared libraries - todo
#
# --------------------------------------------------------------------------
# Set the default values of all variables.
#
# Directory locations: Fixed for any MPI implementation
prefix=/usr/pkg
exec_prefix=/usr/pkg
sysconfdir=/usr/pkg/etc/mpich
includedir=/usr/pkg/include
libdir=/usr/pkg/lib

# Default settings for compiler, flags, and libraries
CXX="c++"
MPICH_VERSION="3.4.3"


# How to pass a linker flag through the compiler.
wl="-Wl,"

# Static library suffix (normally "a").
libext="a"

# Shared library suffix (normally "so").
shlibext="so"

# Format of library name prefix.
libname_spec="lib\$name"

# Library names that the linker finds when passed -lNAME.
library_names_spec="\$libname\$shrext"

# Flag to hardcode $libdir into a binary during linking.
# This must work even if $libdir does not exist.
hardcode_libdir_flag_spec="\${wl}-rpath \${wl}\$libdir"

# Flag to add dtags to allow using runpath instead of rpath
enable_dtags_flag=""
disable_dtags_flag=""

# Whether we need a single -rpath flag with a separated argument.
hardcode_libdir_separator=""

# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
# resulting binary.
hardcode_direct="no"

# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
# resulting binary.
hardcode_minus_L="no"


# Attempt to construct dynamic loading info, based on the user
# preference of rpath, runpath or none and on the detected libdir
# flags.
with_wrapper_dl_type=runpath
if test "X${with_wrapper_dl_type}" = "Xrunpath" ; then
    eval wrapper_dl_type_flags=\"${hardcode_libdir_flag_spec} ${enable_dtags_flag}\"
elif test "X${with_wrapper_dl_type}" = "Xrpath" ; then
    eval wrapper_dl_type_flags=\"${hardcode_libdir_flag_spec} ${disable_dtags_flag}\"
else
    wrapper_dl_type_flags=""
fi

# Internal variables
# Show is set to echo to cause the compilation command to be echoed instead 
# of executed.
Show=
#
# End of initialization of variables
#---------------------------------------------------------------------
# Environment Variables.
# The environment variables MPICH_CXX may be used to override the 
# default choices.
# In addition, if there is a file $sysconfdir/mpicxx-$CXXname.conf, 
# where CXXname is the name of the compiler with all spaces replaced by hyphens
# (e.g., "CC -64" becomes "CC--64", that file is sources, allowing other
# changes to the compilation environment.  See the variables used by the 
# script (defined above)
# Added MPICH_CXX_OLD, MPICH_CXX can be used to prefix CXX
# with external utility, e.g. setenv MPICH_CXX 'eval linkcache $MPICH_CXX_OLD'
if [ -n "$MPICH_CXX" ] ; then
    MPICH_CXX_OLD="$CXX"
    CXX="$MPICH_CXX"
    CXXname=`echo $CXX | sed 's/ /-/g'`
    if [ -s $sysconfdir/mpicxx-$CXXname.conf ] ; then
        . $sysconfdir/mpicxx-$CXXname.conf
    fi
fi
# Allow a profiling option to be selected through an environment variable
if [ -n "$MPICXX_PROFILE" ] ; then
    profConf=$MPICXX_PROFILE
fi
#
# ------------------------------------------------------------------------
# Argument processing.
# This is somewhat awkward because of the handling of arguments within
# the shell.  We want to handle arguments that include spaces without 
# loosing the spacing (an alternative would be to use a more powerful
# scripting language that would allow us to retain the array of values, 
# which the basic (rather than enhanced) Bourne shell does not.  
#
# Look through the arguments for arguments that indicate compile only.
# If these are *not* found, add the library options

linking=yes
allargs=("$@")
argno=0
interlib_deps=yes
static_mpi=no
for arg in "$@" ; do
    # Set addarg to no if this arg should be ignored by the C compiler
    addarg=yes
    case "$arg" in 
 	# ----------------------------------------------------------------
	# Compiler options that affect whether we are linking or no
    -c|-S|-E|-M|-MM)
    # The compiler links by default
    linking=no
    ;;
	# ----------------------------------------------------------------
	# Options that control how we use mpicxx (e.g., -show, 
	# -cxx=* -config=*
    -static)
    interlib_deps=no
    ;;
    -static-mpi)
    interlib_deps=no
    static_mpi=yes
    addarg=no
    ;;
    -echo)
    addarg=no
    set -x
    ;;
    -cxx=*)
    CXX=`echo A$arg | sed -e 's/A-cxx=//g'`
    addarg=no
    ;;
    # Backwards compatibility for MPICH1 - scripts
    -CC=*)
    CXX=`echo A$arg | sed -e 's/A-CC=//g'`
    addarg=no
    ;;
    -show)
    addarg=no
    Show=echo
    ;;
    -config=*)
    addarg=no
    CXXname=`echo A$arg | sed -e 's/A-config=//g'`
    if [ -s "$sysconfdir/mpicxx-$CXXname.conf" ] ; then
        . "$sysconfdir/mpicxx-$CXXname.conf"
    else
	echo "Configuration file mpicxx-$CXXname.conf not found"
    fi
    ;;
    -compile-info|-compile_info)
    # -compile_info included for backward compatibility
    Show=echo
    addarg=no
    ;;
    -link-info|-link_info)
    # -link_info included for backward compatibility
    Show=echo
    addarg=no
    ;;
    -v)
    # Pass this argument to the compiler as well.
    echo "mpicxx for MPICH version $MPICH_VERSION"
    # if there is only 1 argument, it must be -v.
    if [ "$#" -eq "1" ] ; then
        linking=no
    fi
    ;;
    -profile=*)
    # Pass the name of a profiling configuration.  As
    # a special case, lib<name>.so or lib<name>.la may be used
    # if the library is in $libdir
    profConf=`echo A$arg | sed -e 's/A-profile=//g'`
    addarg=no
    # Loading the profConf file is handled below
    ;;
    -nativelinking)
    # Internal option to use native compiler for linking without MPI libraries
    nativelinking=yes
    addarg=no
    ;;
    -help)
    NC=`echo "$CXX" | sed 's%\/% %g' | awk '{print $NF}' -`
    if [ -f "$sysconfdir/mpixxx_opts.conf" ] ; then
        . $sysconfdir/mpixxx_opts.conf
        echo "    -cxx=xxx      - Reset the native compiler to xxx."
    else
        if [ -f "./mpixxx_opts.conf" ] ; then
            . ./mpixxx_opts.conf
            echo "    -cxx=xxx      - Reset the native compiler to xxx."
        fi
    fi
    exit 0
    ;;
    *)
    ;;

    esac
    if [ $addarg = no ] ; then
	unset allargs[$argno]
    fi
    # Some versions of bash do not accept ((argno++))
    argno=`expr $argno + 1`
done

if [ $# -eq 0 ] ; then
    echo "Error: Command line argument is needed!"
    "$0" -help
    exit 1
fi

# -----------------------------------------------------------------------
# Derived variables.  These are assembled from variables set from the
# default, environment, configuration file (if any) and command-line
# options (if any)
cxxlibs=
if [ "mpicxx" != "mpi" ] ; then
    cxxlibs="-lmpicxx"
fi

PROFILE_FOO=
# Handle the case of a profile switch
if [ -n "$profConf" ] ; then
    profConffile=
    if [ -s "$libdir/lib$profConf.a" -o -s "$libdir/lib$profConf.so" ] ; then
	PROFILE_FOO="-l$profConf"
    elif [ -s "$sysconfdir/$profConf.conf" ] ; then
	profConffile="$sysconfdir/$profConf.conf"
    elif [ -s "$profConf.conf" ] ; then
        profConffile="$profConf.conf"
    else
        echo "Profiling configuration file $profConf.conf not found in $sysconfdir"
    fi
    if [ -n "$profConffile" -a -s "$profConffile" ] ; then
	. $profConffile
    fi
fi

final_cxxflags=" -O2 -I/usr/pkg/include -I/usr/include"
final_cppflags=" -I/usr/pkg/include -I/usr/include"
final_ldflags=" -lm -L/usr/pkg/gcc10/lib/gcc/aarch64--netbsd/10.5.0 -Wl,-R/usr/pkg/gcc10/lib/gcc/aarch64--netbsd/10.5.0 -Wl,-zrelro -L/usr/pkg/lib -Wl,-R/usr/pkg/lib -L/usr/lib -Wl,-R/usr/lib "
final_libs=""
if test "no" = "no" -o "${interlib_deps}" = "no" ; then
    final_ldflags="${final_ldflags} -lm -L/usr/pkg/gcc10/lib/gcc/aarch64--netbsd/10.5.0 -Wl,-R/usr/pkg/gcc10/lib/gcc/aarch64--netbsd/10.5.0 -Wl,-zrelro -L/usr/pkg/lib -Wl,-R/usr/pkg/lib -L/usr/lib -Wl,-R/usr/lib"
    final_libs="${final_libs}  -lm  -lpthread  -lexecinfo -lpthread  -lrt "
fi

# A temporary statement to invoke the compiler
# Place the -L before any args incase there are any mpi libraries in there.
# Eventually, we'll want to move this after any non-MPI implementation 
# libraries
if [ "$linking" = yes ] ; then
    if [ "$nativelinking" = yes ] ; then
        $Show $CXX ${final_cppflags} $PROFILE_INCPATHS ${final_cxxflags} ${final_ldflags} "${allargs[@]}" -I$includedir
        rc=$?
    else
      if [ "$static_mpi" = no ] ; then
        $Show $CXX ${final_cppflags} $PROFILE_INCPATHS ${final_cxxflags} ${final_ldflags} "${allargs[@]}" -I$includedir -L$libdir $cxxlibs $PROFILE_PRELIB $PROFILE_FOO ${wrapper_dl_type_flags} -lmpi  $PROFILE_POSTLIB ${final_libs}
      else
        $Show $CXX ${final_cppflags} $PROFILE_INCPATHS ${final_cxxflags} ${final_ldflags} "${allargs[@]}" -I$includedir -L$libdir $cxxlibs $PROFILE_PRELIB $PROFILE_FOO ${wrapper_dl_type_flags} $libdir/libmpi.a  $PROFILE_POSTLIB ${final_libs}
      fi
        rc=$?
    fi
else
    $Show $CXX ${final_cppflags} $PROFILE_INCPATHS ${final_cxxflags} "${allargs[@]}" -I$includedir
    rc=$?
fi

exit $rc
