# -*- coding: utf-8 -*-
# File generated from our OpenAPI spec
from typing import Dict, List, Union
from typing_extensions import Literal, NotRequired, TypedDict


class PaymentIntentUpdateParams(TypedDict):
    amount: NotRequired[int]
    """
    Amount intended to be collected by this PaymentIntent. A positive integer representing how much to charge in the [smallest currency unit](https://docs.stripe.com/currencies#zero-decimal) (e.g., 100 cents to charge $1.00 or 100 to charge ¥100, a zero-decimal currency). The minimum amount is $0.50 US or [equivalent in charge currency](https://docs.stripe.com/currencies#minimum-and-maximum-charge-amounts). The amount value supports up to eight digits (e.g., a value of 99999999 for a USD charge of $999,999.99).
    """
    amount_details: NotRequired[
        "Literal['']|PaymentIntentUpdateParamsAmountDetails"
    ]
    """
    Provides industry-specific information about the amount.
    """
    application_fee_amount: NotRequired["Literal['']|int"]
    """
    The amount of the application fee (if any) that will be requested to be applied to the payment and transferred to the application owner's Stripe account. The amount of the application fee collected will be capped at the total amount captured. For more information, see the PaymentIntents [use case for connected accounts](https://docs.stripe.com/payments/connected-accounts).
    """
    capture_method: NotRequired[
        Literal["automatic", "automatic_async", "manual"]
    ]
    """
    Controls when the funds will be captured from the customer's account.
    """
    currency: NotRequired[str]
    """
    Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Must be a [supported currency](https://stripe.com/docs/currencies).
    """
    customer: NotRequired[str]
    """
    ID of the Customer this PaymentIntent belongs to, if one exists.

    Payment methods attached to other Customers cannot be used with this PaymentIntent.

    If [setup_future_usage](https://api.stripe.com#payment_intent_object-setup_future_usage) is set and this PaymentIntent's payment method is not `card_present`, then the payment method attaches to the Customer after the PaymentIntent has been confirmed and any required actions from the user are complete. If the payment method is `card_present` and isn't a digital wallet, then a [generated_card](https://docs.stripe.com/api/charges/object#charge_object-payment_method_details-card_present-generated_card) payment method representing the card is created and attached to the Customer instead.
    """
    customer_account: NotRequired[str]
    """
    ID of the Account representing the customer that this PaymentIntent belongs to, if one exists.

    Payment methods attached to other Accounts cannot be used with this PaymentIntent.

    If [setup_future_usage](https://api.stripe.com#payment_intent_object-setup_future_usage) is set and this PaymentIntent's payment method is not `card_present`, then the payment method attaches to the Account after the PaymentIntent has been confirmed and any required actions from the user are complete. If the payment method is `card_present` and isn't a digital wallet, then a [generated_card](https://docs.stripe.com/api/charges/object#charge_object-payment_method_details-card_present-generated_card) payment method representing the card is created and attached to the Account instead.
    """
    description: NotRequired[str]
    """
    An arbitrary string attached to the object. Often useful for displaying to users.
    """
    excluded_payment_method_types: NotRequired[
        "Literal['']|List[Literal['acss_debit', 'affirm', 'afterpay_clearpay', 'alipay', 'alma', 'amazon_pay', 'au_becs_debit', 'bacs_debit', 'bancontact', 'billie', 'blik', 'boleto', 'card', 'cashapp', 'crypto', 'customer_balance', 'eps', 'fpx', 'giropay', 'grabpay', 'ideal', 'kakao_pay', 'klarna', 'konbini', 'kr_card', 'mb_way', 'mobilepay', 'multibanco', 'naver_pay', 'nz_bank_account', 'oxxo', 'p24', 'pay_by_bank', 'payco', 'paynow', 'paypal', 'payto', 'pix', 'promptpay', 'revolut_pay', 'samsung_pay', 'satispay', 'sepa_debit', 'sofort', 'swish', 'twint', 'us_bank_account', 'wechat_pay', 'zip']]"
    ]
    """
    The list of payment method types to exclude from use with this payment.
    """
    expand: NotRequired[List[str]]
    """
    Specifies which fields in the response should be expanded.
    """
    hooks: NotRequired["PaymentIntentUpdateParamsHooks"]
    """
    Automations to be run during the PaymentIntent lifecycle
    """
    metadata: NotRequired["Literal['']|Dict[str, str]"]
    """
    Set of [key-value pairs](https://docs.stripe.com/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. Individual keys can be unset by posting an empty value to them. All keys can be unset by posting an empty value to `metadata`.
    """
    payment_details: NotRequired[
        "Literal['']|PaymentIntentUpdateParamsPaymentDetails"
    ]
    """
    Provides industry-specific information about the charge.
    """
    payment_method: NotRequired[str]
    """
    ID of the payment method (a PaymentMethod, Card, or [compatible Source](https://docs.stripe.com/payments/payment-methods/transitioning#compatibility) object) to attach to this PaymentIntent. To unset this field to null, pass in an empty string.
    """
    payment_method_configuration: NotRequired[str]
    """
    The ID of the [payment method configuration](https://docs.stripe.com/api/payment_method_configurations) to use with this PaymentIntent.
    """
    payment_method_data: NotRequired[
        "PaymentIntentUpdateParamsPaymentMethodData"
    ]
    """
    If provided, this hash will be used to create a PaymentMethod. The new PaymentMethod will appear
    in the [payment_method](https://docs.stripe.com/api/payment_intents/object#payment_intent_object-payment_method)
    property on the PaymentIntent.
    """
    payment_method_options: NotRequired[
        "PaymentIntentUpdateParamsPaymentMethodOptions"
    ]
    """
    Payment-method-specific configuration for this PaymentIntent.
    """
    payment_method_types: NotRequired[List[str]]
    """
    The list of payment method types (for example, card) that this PaymentIntent can use. Use `automatic_payment_methods` to manage payment methods from the [Stripe Dashboard](https://dashboard.stripe.com/settings/payment_methods). A list of valid payment method types can be found [here](https://docs.stripe.com/api/payment_methods/object#payment_method_object-type).
    """
    receipt_email: NotRequired["Literal['']|str"]
    """
    Email address that the receipt for the resulting payment will be sent to. If `receipt_email` is specified for a payment in live mode, a receipt will be sent regardless of your [email settings](https://dashboard.stripe.com/account/emails).
    """
    setup_future_usage: NotRequired[
        "Literal['']|Literal['off_session', 'on_session']"
    ]
    """
    Indicates that you intend to make future payments with this PaymentIntent's payment method.

    If you provide a Customer with the PaymentIntent, you can use this parameter to [attach the payment method](https://docs.stripe.com/payments/save-during-payment) to the Customer after the PaymentIntent is confirmed and the customer completes any required actions. If you don't provide a Customer, you can still [attach](https://docs.stripe.com/api/payment_methods/attach) the payment method to a Customer after the transaction completes.

    If the payment method is `card_present` and isn't a digital wallet, Stripe creates and attaches a [generated_card](https://docs.stripe.com/api/charges/object#charge_object-payment_method_details-card_present-generated_card) payment method representing the card to the Customer instead.

    When processing card payments, Stripe uses `setup_future_usage` to help you comply with regional legislation and network rules, such as [SCA](https://docs.stripe.com/strong-customer-authentication).

    If you've already set `setup_future_usage` and you're performing a request using a publishable key, you can only update the value from `on_session` to `off_session`.
    """
    shipping: NotRequired["Literal['']|PaymentIntentUpdateParamsShipping"]
    """
    Shipping information for this PaymentIntent.
    """
    statement_descriptor: NotRequired[str]
    """
    Text that appears on the customer's statement as the statement descriptor for a non-card charge. This value overrides the account's default statement descriptor. For information about requirements, including the 22-character limit, see [the Statement Descriptor docs](https://docs.stripe.com/get-started/account/statement-descriptors).

    Setting this value for a card charge returns an error. For card charges, set the [statement_descriptor_suffix](https://docs.stripe.com/get-started/account/statement-descriptors#dynamic) instead.
    """
    statement_descriptor_suffix: NotRequired[str]
    """
    Provides information about a card charge. Concatenated to the account's [statement descriptor prefix](https://docs.stripe.com/get-started/account/statement-descriptors#static) to form the complete statement descriptor that appears on the customer's statement.
    """
    transfer_data: NotRequired["PaymentIntentUpdateParamsTransferData"]
    """
    Use this parameter to automatically create a Transfer when the payment succeeds. Learn more about the [use case for connected accounts](https://docs.stripe.com/payments/connected-accounts).
    """
    transfer_group: NotRequired[str]
    """
    A string that identifies the resulting payment as part of a group. You can only provide `transfer_group` if it hasn't been set. Learn more about the [use case for connected accounts](https://docs.stripe.com/payments/connected-accounts).
    """


class PaymentIntentUpdateParamsAmountDetails(TypedDict):
    discount_amount: NotRequired["Literal['']|int"]
    """
    The total discount applied on the transaction represented in the [smallest currency unit](https://docs.stripe.com/currencies#zero-decimal). An integer greater than 0.

    This field is mutually exclusive with the `amount_details[line_items][#][discount_amount]` field.
    """
    enforce_arithmetic_validation: NotRequired[bool]
    """
    Set to `false` to return arithmetic validation errors in the response without failing the request. Use this when you want the operation to proceed regardless of arithmetic errors in the line item data.

    Omit or set to `true` to immediately return a 400 error when arithmetic validation fails. Use this for strict validation that prevents processing with line item data that has arithmetic inconsistencies.

    For card payments, Stripe doesn't send line item data to card networks if there's an arithmetic validation error.
    """
    line_items: NotRequired[
        "Literal['']|List[PaymentIntentUpdateParamsAmountDetailsLineItem]"
    ]
    """
    A list of line items, each containing information about a product in the PaymentIntent. There is a maximum of 200 line items.
    """
    shipping: NotRequired[
        "Literal['']|PaymentIntentUpdateParamsAmountDetailsShipping"
    ]
    """
    Contains information about the shipping portion of the amount.
    """
    tax: NotRequired["Literal['']|PaymentIntentUpdateParamsAmountDetailsTax"]
    """
    Contains information about the tax portion of the amount.
    """


class PaymentIntentUpdateParamsAmountDetailsLineItem(TypedDict):
    discount_amount: NotRequired[int]
    """
    The discount applied on this line item represented in the [smallest currency unit](https://docs.stripe.com/currencies#zero-decimal). An integer greater than 0.

    This field is mutually exclusive with the `amount_details[discount_amount]` field.
    """
    payment_method_options: NotRequired[
        "PaymentIntentUpdateParamsAmountDetailsLineItemPaymentMethodOptions"
    ]
    """
    Payment method-specific information for line items.
    """
    product_code: NotRequired[str]
    """
    The product code of the line item, such as an SKU. Required for L3 rates. At most 12 characters long.
    """
    product_name: str
    """
    The product name of the line item. Required for L3 rates. At most 1024 characters long.

    For Cards, this field is truncated to 26 alphanumeric characters before being sent to the card networks. For PayPal, this field is truncated to 127 characters.
    """
    quantity: int
    """
    The quantity of items. Required for L3 rates. An integer greater than 0.
    """
    tax: NotRequired["PaymentIntentUpdateParamsAmountDetailsLineItemTax"]
    """
    Contains information about the tax on the item.
    """
    unit_cost: int
    """
    The unit cost of the line item represented in the [smallest currency unit](https://docs.stripe.com/currencies#zero-decimal). Required for L3 rates. An integer greater than or equal to 0.
    """
    unit_of_measure: NotRequired[str]
    """
    A unit of measure for the line item, such as gallons, feet, meters, etc.
    """


class PaymentIntentUpdateParamsAmountDetailsLineItemPaymentMethodOptions(
    TypedDict,
):
    card: NotRequired[
        "PaymentIntentUpdateParamsAmountDetailsLineItemPaymentMethodOptionsCard"
    ]
    """
    This sub-hash contains line item details that are specific to the `card` payment method.
    """
    card_present: NotRequired[
        "PaymentIntentUpdateParamsAmountDetailsLineItemPaymentMethodOptionsCardPresent"
    ]
    """
    This sub-hash contains line item details that are specific to the `card_present` payment method.
    """
    klarna: NotRequired[
        "PaymentIntentUpdateParamsAmountDetailsLineItemPaymentMethodOptionsKlarna"
    ]
    """
    This sub-hash contains line item details that are specific to the `klarna` payment method.
    """
    paypal: NotRequired[
        "PaymentIntentUpdateParamsAmountDetailsLineItemPaymentMethodOptionsPaypal"
    ]
    """
    This sub-hash contains line item details that are specific to the `paypal` payment method.
    """


class PaymentIntentUpdateParamsAmountDetailsLineItemPaymentMethodOptionsCard(
    TypedDict,
):
    commodity_code: NotRequired[str]
    """
    Identifier that categorizes the items being purchased using a standardized commodity scheme such as (but not limited to) UNSPSC, NAICS, NAPCS, and so on.
    """


class PaymentIntentUpdateParamsAmountDetailsLineItemPaymentMethodOptionsCardPresent(
    TypedDict,
):
    commodity_code: NotRequired[str]
    """
    Identifier that categorizes the items being purchased using a standardized commodity scheme such as (but not limited to) UNSPSC, NAICS, NAPCS, and so on.
    """


class PaymentIntentUpdateParamsAmountDetailsLineItemPaymentMethodOptionsKlarna(
    TypedDict,
):
    image_url: NotRequired[str]
    """
    URL to an image for the product. Max length, 4096 characters.
    """
    product_url: NotRequired[str]
    """
    URL to the product page. Max length, 4096 characters.
    """
    reference: NotRequired[str]
    """
    Unique reference for this line item to correlate it with your system's internal records. The field is displayed in the Klarna Consumer App if passed.
    """
    subscription_reference: NotRequired[str]
    """
    Reference for the subscription this line item is for.
    """


class PaymentIntentUpdateParamsAmountDetailsLineItemPaymentMethodOptionsPaypal(
    TypedDict,
):
    category: NotRequired[
        Literal["digital_goods", "donation", "physical_goods"]
    ]
    """
    Type of the line item.
    """
    description: NotRequired[str]
    """
    Description of the line item.
    """
    sold_by: NotRequired[str]
    """
    The Stripe account ID of the connected account that sells the item.
    """


class PaymentIntentUpdateParamsAmountDetailsLineItemTax(TypedDict):
    total_tax_amount: int
    """
    The total amount of tax on a single line item represented in the [smallest currency unit](https://docs.stripe.com/currencies#zero-decimal). Required for L3 rates. An integer greater than or equal to 0.

    This field is mutually exclusive with the `amount_details[tax][total_tax_amount]` field.
    """


class PaymentIntentUpdateParamsAmountDetailsShipping(TypedDict):
    amount: NotRequired["Literal['']|int"]
    """
    If a physical good is being shipped, the cost of shipping represented in the [smallest currency unit](https://docs.stripe.com/currencies#zero-decimal). An integer greater than or equal to 0.
    """
    from_postal_code: NotRequired["Literal['']|str"]
    """
    If a physical good is being shipped, the postal code of where it is being shipped from. At most 10 alphanumeric characters long, hyphens are allowed.
    """
    to_postal_code: NotRequired["Literal['']|str"]
    """
    If a physical good is being shipped, the postal code of where it is being shipped to. At most 10 alphanumeric characters long, hyphens are allowed.
    """


class PaymentIntentUpdateParamsAmountDetailsTax(TypedDict):
    total_tax_amount: int
    """
    The total amount of tax on the transaction represented in the [smallest currency unit](https://docs.stripe.com/currencies#zero-decimal). Required for L2 rates. An integer greater than or equal to 0.

    This field is mutually exclusive with the `amount_details[line_items][#][tax][total_tax_amount]` field.
    """


class PaymentIntentUpdateParamsHooks(TypedDict):
    inputs: NotRequired["PaymentIntentUpdateParamsHooksInputs"]
    """
    Arguments passed in automations
    """


class PaymentIntentUpdateParamsHooksInputs(TypedDict):
    tax: NotRequired["PaymentIntentUpdateParamsHooksInputsTax"]
    """
    Tax arguments for automations
    """


class PaymentIntentUpdateParamsHooksInputsTax(TypedDict):
    calculation: Union[Literal[""], str]
    """
    The [TaxCalculation](https://docs.stripe.com/api/tax/calculations) id
    """


class PaymentIntentUpdateParamsPaymentDetails(TypedDict):
    customer_reference: NotRequired["Literal['']|str"]
    """
    A unique value to identify the customer. This field is available only for card payments.

    This field is truncated to 25 alphanumeric characters, excluding spaces, before being sent to card networks.
    """
    order_reference: NotRequired["Literal['']|str"]
    """
    A unique value assigned by the business to identify the transaction. Required for L2 and L3 rates.

    Required when the Payment Method Types array contains `card`, including when [automatic_payment_methods.enabled](https://docs.stripe.com/api/payment_intents/create#create_payment_intent-automatic_payment_methods-enabled) is set to `true`.

    For Cards, this field is truncated to 25 alphanumeric characters, excluding spaces, before being sent to card networks. For Klarna, this field is truncated to 255 characters and is visible to customers when they view the order in the Klarna app.
    """


class PaymentIntentUpdateParamsPaymentMethodData(TypedDict):
    acss_debit: NotRequired[
        "PaymentIntentUpdateParamsPaymentMethodDataAcssDebit"
    ]
    """
    If this is an `acss_debit` PaymentMethod, this hash contains details about the ACSS Debit payment method.
    """
    affirm: NotRequired["PaymentIntentUpdateParamsPaymentMethodDataAffirm"]
    """
    If this is an `affirm` PaymentMethod, this hash contains details about the Affirm payment method.
    """
    afterpay_clearpay: NotRequired[
        "PaymentIntentUpdateParamsPaymentMethodDataAfterpayClearpay"
    ]
    """
    If this is an `AfterpayClearpay` PaymentMethod, this hash contains details about the AfterpayClearpay payment method.
    """
    alipay: NotRequired["PaymentIntentUpdateParamsPaymentMethodDataAlipay"]
    """
    If this is an `Alipay` PaymentMethod, this hash contains details about the Alipay payment method.
    """
    allow_redisplay: NotRequired[Literal["always", "limited", "unspecified"]]
    """
    This field indicates whether this payment method can be shown again to its customer in a checkout flow. Stripe products such as Checkout and Elements use this field to determine whether a payment method can be shown as a saved payment method in a checkout flow. The field defaults to `unspecified`.
    """
    alma: NotRequired["PaymentIntentUpdateParamsPaymentMethodDataAlma"]
    """
    If this is a Alma PaymentMethod, this hash contains details about the Alma payment method.
    """
    amazon_pay: NotRequired[
        "PaymentIntentUpdateParamsPaymentMethodDataAmazonPay"
    ]
    """
    If this is a AmazonPay PaymentMethod, this hash contains details about the AmazonPay payment method.
    """
    au_becs_debit: NotRequired[
        "PaymentIntentUpdateParamsPaymentMethodDataAuBecsDebit"
    ]
    """
    If this is an `au_becs_debit` PaymentMethod, this hash contains details about the bank account.
    """
    bacs_debit: NotRequired[
        "PaymentIntentUpdateParamsPaymentMethodDataBacsDebit"
    ]
    """
    If this is a `bacs_debit` PaymentMethod, this hash contains details about the Bacs Direct Debit bank account.
    """
    bancontact: NotRequired[
        "PaymentIntentUpdateParamsPaymentMethodDataBancontact"
    ]
    """
    If this is a `bancontact` PaymentMethod, this hash contains details about the Bancontact payment method.
    """
    billie: NotRequired["PaymentIntentUpdateParamsPaymentMethodDataBillie"]
    """
    If this is a `billie` PaymentMethod, this hash contains details about the Billie payment method.
    """
    billing_details: NotRequired[
        "PaymentIntentUpdateParamsPaymentMethodDataBillingDetails"
    ]
    """
    Billing information associated with the PaymentMethod that may be used or required by particular types of payment methods.
    """
    blik: NotRequired["PaymentIntentUpdateParamsPaymentMethodDataBlik"]
    """
    If this is a `blik` PaymentMethod, this hash contains details about the BLIK payment method.
    """
    boleto: NotRequired["PaymentIntentUpdateParamsPaymentMethodDataBoleto"]
    """
    If this is a `boleto` PaymentMethod, this hash contains details about the Boleto payment method.
    """
    cashapp: NotRequired["PaymentIntentUpdateParamsPaymentMethodDataCashapp"]
    """
    If this is a `cashapp` PaymentMethod, this hash contains details about the Cash App Pay payment method.
    """
    crypto: NotRequired["PaymentIntentUpdateParamsPaymentMethodDataCrypto"]
    """
    If this is a Crypto PaymentMethod, this hash contains details about the Crypto payment method.
    """
    customer_balance: NotRequired[
        "PaymentIntentUpdateParamsPaymentMethodDataCustomerBalance"
    ]
    """
    If this is a `customer_balance` PaymentMethod, this hash contains details about the CustomerBalance payment method.
    """
    eps: NotRequired["PaymentIntentUpdateParamsPaymentMethodDataEps"]
    """
    If this is an `eps` PaymentMethod, this hash contains details about the EPS payment method.
    """
    fpx: NotRequired["PaymentIntentUpdateParamsPaymentMethodDataFpx"]
    """
    If this is an `fpx` PaymentMethod, this hash contains details about the FPX payment method.
    """
    giropay: NotRequired["PaymentIntentUpdateParamsPaymentMethodDataGiropay"]
    """
    If this is a `giropay` PaymentMethod, this hash contains details about the Giropay payment method.
    """
    grabpay: NotRequired["PaymentIntentUpdateParamsPaymentMethodDataGrabpay"]
    """
    If this is a `grabpay` PaymentMethod, this hash contains details about the GrabPay payment method.
    """
    ideal: NotRequired["PaymentIntentUpdateParamsPaymentMethodDataIdeal"]
    """
    If this is an `ideal` PaymentMethod, this hash contains details about the iDEAL payment method.
    """
    interac_present: NotRequired[
        "PaymentIntentUpdateParamsPaymentMethodDataInteracPresent"
    ]
    """
    If this is an `interac_present` PaymentMethod, this hash contains details about the Interac Present payment method.
    """
    kakao_pay: NotRequired[
        "PaymentIntentUpdateParamsPaymentMethodDataKakaoPay"
    ]
    """
    If this is a `kakao_pay` PaymentMethod, this hash contains details about the Kakao Pay payment method.
    """
    klarna: NotRequired["PaymentIntentUpdateParamsPaymentMethodDataKlarna"]
    """
    If this is a `klarna` PaymentMethod, this hash contains details about the Klarna payment method.
    """
    konbini: NotRequired["PaymentIntentUpdateParamsPaymentMethodDataKonbini"]
    """
    If this is a `konbini` PaymentMethod, this hash contains details about the Konbini payment method.
    """
    kr_card: NotRequired["PaymentIntentUpdateParamsPaymentMethodDataKrCard"]
    """
    If this is a `kr_card` PaymentMethod, this hash contains details about the Korean Card payment method.
    """
    link: NotRequired["PaymentIntentUpdateParamsPaymentMethodDataLink"]
    """
    If this is an `Link` PaymentMethod, this hash contains details about the Link payment method.
    """
    mb_way: NotRequired["PaymentIntentUpdateParamsPaymentMethodDataMbWay"]
    """
    If this is a MB WAY PaymentMethod, this hash contains details about the MB WAY payment method.
    """
    metadata: NotRequired[Dict[str, str]]
    """
    Set of [key-value pairs](https://docs.stripe.com/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. Individual keys can be unset by posting an empty value to them. All keys can be unset by posting an empty value to `metadata`.
    """
    mobilepay: NotRequired[
        "PaymentIntentUpdateParamsPaymentMethodDataMobilepay"
    ]
    """
    If this is a `mobilepay` PaymentMethod, this hash contains details about the MobilePay payment method.
    """
    multibanco: NotRequired[
        "PaymentIntentUpdateParamsPaymentMethodDataMultibanco"
    ]
    """
    If this is a `multibanco` PaymentMethod, this hash contains details about the Multibanco payment method.
    """
    naver_pay: NotRequired[
        "PaymentIntentUpdateParamsPaymentMethodDataNaverPay"
    ]
    """
    If this is a `naver_pay` PaymentMethod, this hash contains details about the Naver Pay payment method.
    """
    nz_bank_account: NotRequired[
        "PaymentIntentUpdateParamsPaymentMethodDataNzBankAccount"
    ]
    """
    If this is an nz_bank_account PaymentMethod, this hash contains details about the nz_bank_account payment method.
    """
    oxxo: NotRequired["PaymentIntentUpdateParamsPaymentMethodDataOxxo"]
    """
    If this is an `oxxo` PaymentMethod, this hash contains details about the OXXO payment method.
    """
    p24: NotRequired["PaymentIntentUpdateParamsPaymentMethodDataP24"]
    """
    If this is a `p24` PaymentMethod, this hash contains details about the P24 payment method.
    """
    pay_by_bank: NotRequired[
        "PaymentIntentUpdateParamsPaymentMethodDataPayByBank"
    ]
    """
    If this is a `pay_by_bank` PaymentMethod, this hash contains details about the PayByBank payment method.
    """
    payco: NotRequired["PaymentIntentUpdateParamsPaymentMethodDataPayco"]
    """
    If this is a `payco` PaymentMethod, this hash contains details about the PAYCO payment method.
    """
    paynow: NotRequired["PaymentIntentUpdateParamsPaymentMethodDataPaynow"]
    """
    If this is a `paynow` PaymentMethod, this hash contains details about the PayNow payment method.
    """
    paypal: NotRequired["PaymentIntentUpdateParamsPaymentMethodDataPaypal"]
    """
    If this is a `paypal` PaymentMethod, this hash contains details about the PayPal payment method.
    """
    payto: NotRequired["PaymentIntentUpdateParamsPaymentMethodDataPayto"]
    """
    If this is a `payto` PaymentMethod, this hash contains details about the PayTo payment method.
    """
    pix: NotRequired["PaymentIntentUpdateParamsPaymentMethodDataPix"]
    """
    If this is a `pix` PaymentMethod, this hash contains details about the Pix payment method.
    """
    promptpay: NotRequired[
        "PaymentIntentUpdateParamsPaymentMethodDataPromptpay"
    ]
    """
    If this is a `promptpay` PaymentMethod, this hash contains details about the PromptPay payment method.
    """
    radar_options: NotRequired[
        "PaymentIntentUpdateParamsPaymentMethodDataRadarOptions"
    ]
    """
    Options to configure Radar. See [Radar Session](https://docs.stripe.com/radar/radar-session) for more information.
    """
    revolut_pay: NotRequired[
        "PaymentIntentUpdateParamsPaymentMethodDataRevolutPay"
    ]
    """
    If this is a `revolut_pay` PaymentMethod, this hash contains details about the Revolut Pay payment method.
    """
    samsung_pay: NotRequired[
        "PaymentIntentUpdateParamsPaymentMethodDataSamsungPay"
    ]
    """
    If this is a `samsung_pay` PaymentMethod, this hash contains details about the SamsungPay payment method.
    """
    satispay: NotRequired["PaymentIntentUpdateParamsPaymentMethodDataSatispay"]
    """
    If this is a `satispay` PaymentMethod, this hash contains details about the Satispay payment method.
    """
    sepa_debit: NotRequired[
        "PaymentIntentUpdateParamsPaymentMethodDataSepaDebit"
    ]
    """
    If this is a `sepa_debit` PaymentMethod, this hash contains details about the SEPA debit bank account.
    """
    sofort: NotRequired["PaymentIntentUpdateParamsPaymentMethodDataSofort"]
    """
    If this is a `sofort` PaymentMethod, this hash contains details about the SOFORT payment method.
    """
    swish: NotRequired["PaymentIntentUpdateParamsPaymentMethodDataSwish"]
    """
    If this is a `swish` PaymentMethod, this hash contains details about the Swish payment method.
    """
    twint: NotRequired["PaymentIntentUpdateParamsPaymentMethodDataTwint"]
    """
    If this is a TWINT PaymentMethod, this hash contains details about the TWINT payment method.
    """
    type: Literal[
        "acss_debit",
        "affirm",
        "afterpay_clearpay",
        "alipay",
        "alma",
        "amazon_pay",
        "au_becs_debit",
        "bacs_debit",
        "bancontact",
        "billie",
        "blik",
        "boleto",
        "cashapp",
        "crypto",
        "customer_balance",
        "eps",
        "fpx",
        "giropay",
        "grabpay",
        "ideal",
        "kakao_pay",
        "klarna",
        "konbini",
        "kr_card",
        "link",
        "mb_way",
        "mobilepay",
        "multibanco",
        "naver_pay",
        "nz_bank_account",
        "oxxo",
        "p24",
        "pay_by_bank",
        "payco",
        "paynow",
        "paypal",
        "payto",
        "pix",
        "promptpay",
        "revolut_pay",
        "samsung_pay",
        "satispay",
        "sepa_debit",
        "sofort",
        "swish",
        "twint",
        "us_bank_account",
        "wechat_pay",
        "zip",
    ]
    """
    The type of the PaymentMethod. An additional hash is included on the PaymentMethod with a name matching this value. It contains additional information specific to the PaymentMethod type.
    """
    us_bank_account: NotRequired[
        "PaymentIntentUpdateParamsPaymentMethodDataUsBankAccount"
    ]
    """
    If this is an `us_bank_account` PaymentMethod, this hash contains details about the US bank account payment method.
    """
    wechat_pay: NotRequired[
        "PaymentIntentUpdateParamsPaymentMethodDataWechatPay"
    ]
    """
    If this is an `wechat_pay` PaymentMethod, this hash contains details about the wechat_pay payment method.
    """
    zip: NotRequired["PaymentIntentUpdateParamsPaymentMethodDataZip"]
    """
    If this is a `zip` PaymentMethod, this hash contains details about the Zip payment method.
    """


class PaymentIntentUpdateParamsPaymentMethodDataAcssDebit(TypedDict):
    account_number: str
    """
    Customer's bank account number.
    """
    institution_number: str
    """
    Institution number of the customer's bank.
    """
    transit_number: str
    """
    Transit number of the customer's bank.
    """


class PaymentIntentUpdateParamsPaymentMethodDataAffirm(TypedDict):
    pass


class PaymentIntentUpdateParamsPaymentMethodDataAfterpayClearpay(TypedDict):
    pass


class PaymentIntentUpdateParamsPaymentMethodDataAlipay(TypedDict):
    pass


class PaymentIntentUpdateParamsPaymentMethodDataAlma(TypedDict):
    pass


class PaymentIntentUpdateParamsPaymentMethodDataAmazonPay(TypedDict):
    pass


class PaymentIntentUpdateParamsPaymentMethodDataAuBecsDebit(TypedDict):
    account_number: str
    """
    The account number for the bank account.
    """
    bsb_number: str
    """
    Bank-State-Branch number of the bank account.
    """


class PaymentIntentUpdateParamsPaymentMethodDataBacsDebit(TypedDict):
    account_number: NotRequired[str]
    """
    Account number of the bank account that the funds will be debited from.
    """
    sort_code: NotRequired[str]
    """
    Sort code of the bank account. (e.g., `10-20-30`)
    """


class PaymentIntentUpdateParamsPaymentMethodDataBancontact(TypedDict):
    pass


class PaymentIntentUpdateParamsPaymentMethodDataBillie(TypedDict):
    pass


class PaymentIntentUpdateParamsPaymentMethodDataBillingDetails(TypedDict):
    address: NotRequired[
        "Literal['']|PaymentIntentUpdateParamsPaymentMethodDataBillingDetailsAddress"
    ]
    """
    Billing address.
    """
    email: NotRequired["Literal['']|str"]
    """
    Email address.
    """
    name: NotRequired["Literal['']|str"]
    """
    Full name.
    """
    phone: NotRequired["Literal['']|str"]
    """
    Billing phone number (including extension).
    """
    tax_id: NotRequired[str]
    """
    Taxpayer identification number. Used only for transactions between LATAM buyers and non-LATAM sellers.
    """


class PaymentIntentUpdateParamsPaymentMethodDataBillingDetailsAddress(
    TypedDict,
):
    city: NotRequired[str]
    """
    City, district, suburb, town, or village.
    """
    country: NotRequired[str]
    """
    Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)).
    """
    line1: NotRequired[str]
    """
    Address line 1, such as the street, PO Box, or company name.
    """
    line2: NotRequired[str]
    """
    Address line 2, such as the apartment, suite, unit, or building.
    """
    postal_code: NotRequired[str]
    """
    ZIP or postal code.
    """
    state: NotRequired[str]
    """
    State, county, province, or region ([ISO 3166-2](https://en.wikipedia.org/wiki/ISO_3166-2)).
    """


class PaymentIntentUpdateParamsPaymentMethodDataBlik(TypedDict):
    pass


class PaymentIntentUpdateParamsPaymentMethodDataBoleto(TypedDict):
    tax_id: str
    """
    The tax ID of the customer (CPF for individual consumers or CNPJ for businesses consumers)
    """


class PaymentIntentUpdateParamsPaymentMethodDataCashapp(TypedDict):
    pass


class PaymentIntentUpdateParamsPaymentMethodDataCrypto(TypedDict):
    pass


class PaymentIntentUpdateParamsPaymentMethodDataCustomerBalance(TypedDict):
    pass


class PaymentIntentUpdateParamsPaymentMethodDataEps(TypedDict):
    bank: NotRequired[
        Literal[
            "arzte_und_apotheker_bank",
            "austrian_anadi_bank_ag",
            "bank_austria",
            "bankhaus_carl_spangler",
            "bankhaus_schelhammer_und_schattera_ag",
            "bawag_psk_ag",
            "bks_bank_ag",
            "brull_kallmus_bank_ag",
            "btv_vier_lander_bank",
            "capital_bank_grawe_gruppe_ag",
            "deutsche_bank_ag",
            "dolomitenbank",
            "easybank_ag",
            "erste_bank_und_sparkassen",
            "hypo_alpeadriabank_international_ag",
            "hypo_bank_burgenland_aktiengesellschaft",
            "hypo_noe_lb_fur_niederosterreich_u_wien",
            "hypo_oberosterreich_salzburg_steiermark",
            "hypo_tirol_bank_ag",
            "hypo_vorarlberg_bank_ag",
            "marchfelder_bank",
            "oberbank_ag",
            "raiffeisen_bankengruppe_osterreich",
            "schoellerbank_ag",
            "sparda_bank_wien",
            "volksbank_gruppe",
            "volkskreditbank_ag",
            "vr_bank_braunau",
        ]
    ]
    """
    The customer's bank.
    """


class PaymentIntentUpdateParamsPaymentMethodDataFpx(TypedDict):
    account_holder_type: NotRequired[Literal["company", "individual"]]
    """
    Account holder type for FPX transaction
    """
    bank: Literal[
        "affin_bank",
        "agrobank",
        "alliance_bank",
        "ambank",
        "bank_islam",
        "bank_muamalat",
        "bank_of_china",
        "bank_rakyat",
        "bsn",
        "cimb",
        "deutsche_bank",
        "hong_leong_bank",
        "hsbc",
        "kfh",
        "maybank2e",
        "maybank2u",
        "ocbc",
        "pb_enterprise",
        "public_bank",
        "rhb",
        "standard_chartered",
        "uob",
    ]
    """
    The customer's bank.
    """


class PaymentIntentUpdateParamsPaymentMethodDataGiropay(TypedDict):
    pass


class PaymentIntentUpdateParamsPaymentMethodDataGrabpay(TypedDict):
    pass


class PaymentIntentUpdateParamsPaymentMethodDataIdeal(TypedDict):
    bank: NotRequired[
        Literal[
            "abn_amro",
            "adyen",
            "asn_bank",
            "bunq",
            "buut",
            "finom",
            "handelsbanken",
            "ing",
            "knab",
            "mollie",
            "moneyou",
            "n26",
            "nn",
            "rabobank",
            "regiobank",
            "revolut",
            "sns_bank",
            "triodos_bank",
            "van_lanschot",
            "yoursafe",
        ]
    ]
    """
    The customer's bank. Only use this parameter for existing customers. Don't use it for new customers.
    """


class PaymentIntentUpdateParamsPaymentMethodDataInteracPresent(TypedDict):
    pass


class PaymentIntentUpdateParamsPaymentMethodDataKakaoPay(TypedDict):
    pass


class PaymentIntentUpdateParamsPaymentMethodDataKlarna(TypedDict):
    dob: NotRequired["PaymentIntentUpdateParamsPaymentMethodDataKlarnaDob"]
    """
    Customer's date of birth
    """


class PaymentIntentUpdateParamsPaymentMethodDataKlarnaDob(TypedDict):
    day: int
    """
    The day of birth, between 1 and 31.
    """
    month: int
    """
    The month of birth, between 1 and 12.
    """
    year: int
    """
    The four-digit year of birth.
    """


class PaymentIntentUpdateParamsPaymentMethodDataKonbini(TypedDict):
    pass


class PaymentIntentUpdateParamsPaymentMethodDataKrCard(TypedDict):
    pass


class PaymentIntentUpdateParamsPaymentMethodDataLink(TypedDict):
    pass


class PaymentIntentUpdateParamsPaymentMethodDataMbWay(TypedDict):
    pass


class PaymentIntentUpdateParamsPaymentMethodDataMobilepay(TypedDict):
    pass


class PaymentIntentUpdateParamsPaymentMethodDataMultibanco(TypedDict):
    pass


class PaymentIntentUpdateParamsPaymentMethodDataNaverPay(TypedDict):
    funding: NotRequired[Literal["card", "points"]]
    """
    Whether to use Naver Pay points or a card to fund this transaction. If not provided, this defaults to `card`.
    """


class PaymentIntentUpdateParamsPaymentMethodDataNzBankAccount(TypedDict):
    account_holder_name: NotRequired[str]
    """
    The name on the bank account. Only required if the account holder name is different from the name of the authorized signatory collected in the PaymentMethod's billing details.
    """
    account_number: str
    """
    The account number for the bank account.
    """
    bank_code: str
    """
    The numeric code for the bank account's bank.
    """
    branch_code: str
    """
    The numeric code for the bank account's bank branch.
    """
    reference: NotRequired[str]
    suffix: str
    """
    The suffix of the bank account number.
    """


class PaymentIntentUpdateParamsPaymentMethodDataOxxo(TypedDict):
    pass


class PaymentIntentUpdateParamsPaymentMethodDataP24(TypedDict):
    bank: NotRequired[
        Literal[
            "alior_bank",
            "bank_millennium",
            "bank_nowy_bfg_sa",
            "bank_pekao_sa",
            "banki_spbdzielcze",
            "blik",
            "bnp_paribas",
            "boz",
            "citi_handlowy",
            "credit_agricole",
            "envelobank",
            "etransfer_pocztowy24",
            "getin_bank",
            "ideabank",
            "ing",
            "inteligo",
            "mbank_mtransfer",
            "nest_przelew",
            "noble_pay",
            "pbac_z_ipko",
            "plus_bank",
            "santander_przelew24",
            "tmobile_usbugi_bankowe",
            "toyota_bank",
            "velobank",
            "volkswagen_bank",
        ]
    ]
    """
    The customer's bank.
    """


class PaymentIntentUpdateParamsPaymentMethodDataPayByBank(TypedDict):
    pass


class PaymentIntentUpdateParamsPaymentMethodDataPayco(TypedDict):
    pass


class PaymentIntentUpdateParamsPaymentMethodDataPaynow(TypedDict):
    pass


class PaymentIntentUpdateParamsPaymentMethodDataPaypal(TypedDict):
    pass


class PaymentIntentUpdateParamsPaymentMethodDataPayto(TypedDict):
    account_number: NotRequired[str]
    """
    The account number for the bank account.
    """
    bsb_number: NotRequired[str]
    """
    Bank-State-Branch number of the bank account.
    """
    pay_id: NotRequired[str]
    """
    The PayID alias for the bank account.
    """


class PaymentIntentUpdateParamsPaymentMethodDataPix(TypedDict):
    pass


class PaymentIntentUpdateParamsPaymentMethodDataPromptpay(TypedDict):
    pass


class PaymentIntentUpdateParamsPaymentMethodDataRadarOptions(TypedDict):
    session: NotRequired[str]
    """
    A [Radar Session](https://docs.stripe.com/radar/radar-session) is a snapshot of the browser metadata and device details that help Radar make more accurate predictions on your payments.
    """


class PaymentIntentUpdateParamsPaymentMethodDataRevolutPay(TypedDict):
    pass


class PaymentIntentUpdateParamsPaymentMethodDataSamsungPay(TypedDict):
    pass


class PaymentIntentUpdateParamsPaymentMethodDataSatispay(TypedDict):
    pass


class PaymentIntentUpdateParamsPaymentMethodDataSepaDebit(TypedDict):
    iban: str
    """
    IBAN of the bank account.
    """


class PaymentIntentUpdateParamsPaymentMethodDataSofort(TypedDict):
    country: Literal["AT", "BE", "DE", "ES", "IT", "NL"]
    """
    Two-letter ISO code representing the country the bank account is located in.
    """


class PaymentIntentUpdateParamsPaymentMethodDataSwish(TypedDict):
    pass


class PaymentIntentUpdateParamsPaymentMethodDataTwint(TypedDict):
    pass


class PaymentIntentUpdateParamsPaymentMethodDataUsBankAccount(TypedDict):
    account_holder_type: NotRequired[Literal["company", "individual"]]
    """
    Account holder type: individual or company.
    """
    account_number: NotRequired[str]
    """
    Account number of the bank account.
    """
    account_type: NotRequired[Literal["checking", "savings"]]
    """
    Account type: checkings or savings. Defaults to checking if omitted.
    """
    financial_connections_account: NotRequired[str]
    """
    The ID of a Financial Connections Account to use as a payment method.
    """
    routing_number: NotRequired[str]
    """
    Routing number of the bank account.
    """


class PaymentIntentUpdateParamsPaymentMethodDataWechatPay(TypedDict):
    pass


class PaymentIntentUpdateParamsPaymentMethodDataZip(TypedDict):
    pass


class PaymentIntentUpdateParamsPaymentMethodOptions(TypedDict):
    acss_debit: NotRequired[
        "Literal['']|PaymentIntentUpdateParamsPaymentMethodOptionsAcssDebit"
    ]
    """
    If this is a `acss_debit` PaymentMethod, this sub-hash contains details about the ACSS Debit payment method options.
    """
    affirm: NotRequired[
        "Literal['']|PaymentIntentUpdateParamsPaymentMethodOptionsAffirm"
    ]
    """
    If this is an `affirm` PaymentMethod, this sub-hash contains details about the Affirm payment method options.
    """
    afterpay_clearpay: NotRequired[
        "Literal['']|PaymentIntentUpdateParamsPaymentMethodOptionsAfterpayClearpay"
    ]
    """
    If this is a `afterpay_clearpay` PaymentMethod, this sub-hash contains details about the Afterpay Clearpay payment method options.
    """
    alipay: NotRequired[
        "Literal['']|PaymentIntentUpdateParamsPaymentMethodOptionsAlipay"
    ]
    """
    If this is a `alipay` PaymentMethod, this sub-hash contains details about the Alipay payment method options.
    """
    alma: NotRequired[
        "Literal['']|PaymentIntentUpdateParamsPaymentMethodOptionsAlma"
    ]
    """
    If this is a `alma` PaymentMethod, this sub-hash contains details about the Alma payment method options.
    """
    amazon_pay: NotRequired[
        "Literal['']|PaymentIntentUpdateParamsPaymentMethodOptionsAmazonPay"
    ]
    """
    If this is a `amazon_pay` PaymentMethod, this sub-hash contains details about the Amazon Pay payment method options.
    """
    au_becs_debit: NotRequired[
        "Literal['']|PaymentIntentUpdateParamsPaymentMethodOptionsAuBecsDebit"
    ]
    """
    If this is a `au_becs_debit` PaymentMethod, this sub-hash contains details about the AU BECS Direct Debit payment method options.
    """
    bacs_debit: NotRequired[
        "Literal['']|PaymentIntentUpdateParamsPaymentMethodOptionsBacsDebit"
    ]
    """
    If this is a `bacs_debit` PaymentMethod, this sub-hash contains details about the BACS Debit payment method options.
    """
    bancontact: NotRequired[
        "Literal['']|PaymentIntentUpdateParamsPaymentMethodOptionsBancontact"
    ]
    """
    If this is a `bancontact` PaymentMethod, this sub-hash contains details about the Bancontact payment method options.
    """
    billie: NotRequired[
        "Literal['']|PaymentIntentUpdateParamsPaymentMethodOptionsBillie"
    ]
    """
    If this is a `billie` PaymentMethod, this sub-hash contains details about the Billie payment method options.
    """
    blik: NotRequired[
        "Literal['']|PaymentIntentUpdateParamsPaymentMethodOptionsBlik"
    ]
    """
    If this is a `blik` PaymentMethod, this sub-hash contains details about the BLIK payment method options.
    """
    boleto: NotRequired[
        "Literal['']|PaymentIntentUpdateParamsPaymentMethodOptionsBoleto"
    ]
    """
    If this is a `boleto` PaymentMethod, this sub-hash contains details about the Boleto payment method options.
    """
    card: NotRequired[
        "Literal['']|PaymentIntentUpdateParamsPaymentMethodOptionsCard"
    ]
    """
    Configuration for any card payments attempted on this PaymentIntent.
    """
    card_present: NotRequired[
        "Literal['']|PaymentIntentUpdateParamsPaymentMethodOptionsCardPresent"
    ]
    """
    If this is a `card_present` PaymentMethod, this sub-hash contains details about the Card Present payment method options.
    """
    cashapp: NotRequired[
        "Literal['']|PaymentIntentUpdateParamsPaymentMethodOptionsCashapp"
    ]
    """
    If this is a `cashapp` PaymentMethod, this sub-hash contains details about the Cash App Pay payment method options.
    """
    crypto: NotRequired[
        "Literal['']|PaymentIntentUpdateParamsPaymentMethodOptionsCrypto"
    ]
    """
    If this is a `crypto` PaymentMethod, this sub-hash contains details about the Crypto payment method options.
    """
    customer_balance: NotRequired[
        "Literal['']|PaymentIntentUpdateParamsPaymentMethodOptionsCustomerBalance"
    ]
    """
    If this is a `customer balance` PaymentMethod, this sub-hash contains details about the customer balance payment method options.
    """
    eps: NotRequired[
        "Literal['']|PaymentIntentUpdateParamsPaymentMethodOptionsEps"
    ]
    """
    If this is a `eps` PaymentMethod, this sub-hash contains details about the EPS payment method options.
    """
    fpx: NotRequired[
        "Literal['']|PaymentIntentUpdateParamsPaymentMethodOptionsFpx"
    ]
    """
    If this is a `fpx` PaymentMethod, this sub-hash contains details about the FPX payment method options.
    """
    giropay: NotRequired[
        "Literal['']|PaymentIntentUpdateParamsPaymentMethodOptionsGiropay"
    ]
    """
    If this is a `giropay` PaymentMethod, this sub-hash contains details about the Giropay payment method options.
    """
    grabpay: NotRequired[
        "Literal['']|PaymentIntentUpdateParamsPaymentMethodOptionsGrabpay"
    ]
    """
    If this is a `grabpay` PaymentMethod, this sub-hash contains details about the Grabpay payment method options.
    """
    ideal: NotRequired[
        "Literal['']|PaymentIntentUpdateParamsPaymentMethodOptionsIdeal"
    ]
    """
    If this is a `ideal` PaymentMethod, this sub-hash contains details about the Ideal payment method options.
    """
    interac_present: NotRequired[
        "Literal['']|PaymentIntentUpdateParamsPaymentMethodOptionsInteracPresent"
    ]
    """
    If this is a `interac_present` PaymentMethod, this sub-hash contains details about the Card Present payment method options.
    """
    kakao_pay: NotRequired[
        "Literal['']|PaymentIntentUpdateParamsPaymentMethodOptionsKakaoPay"
    ]
    """
    If this is a `kakao_pay` PaymentMethod, this sub-hash contains details about the Kakao Pay payment method options.
    """
    klarna: NotRequired[
        "Literal['']|PaymentIntentUpdateParamsPaymentMethodOptionsKlarna"
    ]
    """
    If this is a `klarna` PaymentMethod, this sub-hash contains details about the Klarna payment method options.
    """
    konbini: NotRequired[
        "Literal['']|PaymentIntentUpdateParamsPaymentMethodOptionsKonbini"
    ]
    """
    If this is a `konbini` PaymentMethod, this sub-hash contains details about the Konbini payment method options.
    """
    kr_card: NotRequired[
        "Literal['']|PaymentIntentUpdateParamsPaymentMethodOptionsKrCard"
    ]
    """
    If this is a `kr_card` PaymentMethod, this sub-hash contains details about the KR Card payment method options.
    """
    link: NotRequired[
        "Literal['']|PaymentIntentUpdateParamsPaymentMethodOptionsLink"
    ]
    """
    If this is a `link` PaymentMethod, this sub-hash contains details about the Link payment method options.
    """
    mb_way: NotRequired[
        "Literal['']|PaymentIntentUpdateParamsPaymentMethodOptionsMbWay"
    ]
    """
    If this is a `mb_way` PaymentMethod, this sub-hash contains details about the MB WAY payment method options.
    """
    mobilepay: NotRequired[
        "Literal['']|PaymentIntentUpdateParamsPaymentMethodOptionsMobilepay"
    ]
    """
    If this is a `MobilePay` PaymentMethod, this sub-hash contains details about the MobilePay payment method options.
    """
    multibanco: NotRequired[
        "Literal['']|PaymentIntentUpdateParamsPaymentMethodOptionsMultibanco"
    ]
    """
    If this is a `multibanco` PaymentMethod, this sub-hash contains details about the Multibanco payment method options.
    """
    naver_pay: NotRequired[
        "Literal['']|PaymentIntentUpdateParamsPaymentMethodOptionsNaverPay"
    ]
    """
    If this is a `naver_pay` PaymentMethod, this sub-hash contains details about the Naver Pay payment method options.
    """
    nz_bank_account: NotRequired[
        "Literal['']|PaymentIntentUpdateParamsPaymentMethodOptionsNzBankAccount"
    ]
    """
    If this is a `nz_bank_account` PaymentMethod, this sub-hash contains details about the NZ BECS Direct Debit payment method options.
    """
    oxxo: NotRequired[
        "Literal['']|PaymentIntentUpdateParamsPaymentMethodOptionsOxxo"
    ]
    """
    If this is a `oxxo` PaymentMethod, this sub-hash contains details about the OXXO payment method options.
    """
    p24: NotRequired[
        "Literal['']|PaymentIntentUpdateParamsPaymentMethodOptionsP24"
    ]
    """
    If this is a `p24` PaymentMethod, this sub-hash contains details about the Przelewy24 payment method options.
    """
    pay_by_bank: NotRequired[
        "Literal['']|PaymentIntentUpdateParamsPaymentMethodOptionsPayByBank"
    ]
    """
    If this is a `pay_by_bank` PaymentMethod, this sub-hash contains details about the PayByBank payment method options.
    """
    payco: NotRequired[
        "Literal['']|PaymentIntentUpdateParamsPaymentMethodOptionsPayco"
    ]
    """
    If this is a `payco` PaymentMethod, this sub-hash contains details about the PAYCO payment method options.
    """
    paynow: NotRequired[
        "Literal['']|PaymentIntentUpdateParamsPaymentMethodOptionsPaynow"
    ]
    """
    If this is a `paynow` PaymentMethod, this sub-hash contains details about the PayNow payment method options.
    """
    paypal: NotRequired[
        "Literal['']|PaymentIntentUpdateParamsPaymentMethodOptionsPaypal"
    ]
    """
    If this is a `paypal` PaymentMethod, this sub-hash contains details about the PayPal payment method options.
    """
    payto: NotRequired[
        "Literal['']|PaymentIntentUpdateParamsPaymentMethodOptionsPayto"
    ]
    """
    If this is a `payto` PaymentMethod, this sub-hash contains details about the PayTo payment method options.
    """
    pix: NotRequired[
        "Literal['']|PaymentIntentUpdateParamsPaymentMethodOptionsPix"
    ]
    """
    If this is a `pix` PaymentMethod, this sub-hash contains details about the Pix payment method options.
    """
    promptpay: NotRequired[
        "Literal['']|PaymentIntentUpdateParamsPaymentMethodOptionsPromptpay"
    ]
    """
    If this is a `promptpay` PaymentMethod, this sub-hash contains details about the PromptPay payment method options.
    """
    revolut_pay: NotRequired[
        "Literal['']|PaymentIntentUpdateParamsPaymentMethodOptionsRevolutPay"
    ]
    """
    If this is a `revolut_pay` PaymentMethod, this sub-hash contains details about the Revolut Pay payment method options.
    """
    samsung_pay: NotRequired[
        "Literal['']|PaymentIntentUpdateParamsPaymentMethodOptionsSamsungPay"
    ]
    """
    If this is a `samsung_pay` PaymentMethod, this sub-hash contains details about the Samsung Pay payment method options.
    """
    satispay: NotRequired[
        "Literal['']|PaymentIntentUpdateParamsPaymentMethodOptionsSatispay"
    ]
    """
    If this is a `satispay` PaymentMethod, this sub-hash contains details about the Satispay payment method options.
    """
    sepa_debit: NotRequired[
        "Literal['']|PaymentIntentUpdateParamsPaymentMethodOptionsSepaDebit"
    ]
    """
    If this is a `sepa_debit` PaymentIntent, this sub-hash contains details about the SEPA Debit payment method options.
    """
    sofort: NotRequired[
        "Literal['']|PaymentIntentUpdateParamsPaymentMethodOptionsSofort"
    ]
    """
    If this is a `sofort` PaymentMethod, this sub-hash contains details about the SOFORT payment method options.
    """
    swish: NotRequired[
        "Literal['']|PaymentIntentUpdateParamsPaymentMethodOptionsSwish"
    ]
    """
    If this is a `Swish` PaymentMethod, this sub-hash contains details about the Swish payment method options.
    """
    twint: NotRequired[
        "Literal['']|PaymentIntentUpdateParamsPaymentMethodOptionsTwint"
    ]
    """
    If this is a `twint` PaymentMethod, this sub-hash contains details about the TWINT payment method options.
    """
    us_bank_account: NotRequired[
        "Literal['']|PaymentIntentUpdateParamsPaymentMethodOptionsUsBankAccount"
    ]
    """
    If this is a `us_bank_account` PaymentMethod, this sub-hash contains details about the US bank account payment method options.
    """
    wechat_pay: NotRequired[
        "Literal['']|PaymentIntentUpdateParamsPaymentMethodOptionsWechatPay"
    ]
    """
    If this is a `wechat_pay` PaymentMethod, this sub-hash contains details about the WeChat Pay payment method options.
    """
    zip: NotRequired[
        "Literal['']|PaymentIntentUpdateParamsPaymentMethodOptionsZip"
    ]
    """
    If this is a `zip` PaymentMethod, this sub-hash contains details about the Zip payment method options.
    """


class PaymentIntentUpdateParamsPaymentMethodOptionsAcssDebit(TypedDict):
    mandate_options: NotRequired[
        "PaymentIntentUpdateParamsPaymentMethodOptionsAcssDebitMandateOptions"
    ]
    """
    Additional fields for Mandate creation
    """
    setup_future_usage: NotRequired[
        "Literal['']|Literal['none', 'off_session', 'on_session']"
    ]
    """
    Indicates that you intend to make future payments with this PaymentIntent's payment method.

    If you provide a Customer with the PaymentIntent, you can use this parameter to [attach the payment method](https://docs.stripe.com/payments/save-during-payment) to the Customer after the PaymentIntent is confirmed and the customer completes any required actions. If you don't provide a Customer, you can still [attach](https://docs.stripe.com/api/payment_methods/attach) the payment method to a Customer after the transaction completes.

    If the payment method is `card_present` and isn't a digital wallet, Stripe creates and attaches a [generated_card](https://docs.stripe.com/api/charges/object#charge_object-payment_method_details-card_present-generated_card) payment method representing the card to the Customer instead.

    When processing card payments, Stripe uses `setup_future_usage` to help you comply with regional legislation and network rules, such as [SCA](https://docs.stripe.com/strong-customer-authentication).

    If you've already set `setup_future_usage` and you're performing a request using a publishable key, you can only update the value from `on_session` to `off_session`.
    """
    target_date: NotRequired[str]
    """
    Controls when Stripe will attempt to debit the funds from the customer's account. The date must be a string in YYYY-MM-DD format. The date must be in the future and between 3 and 15 calendar days from now.
    """
    verification_method: NotRequired[
        Literal["automatic", "instant", "microdeposits"]
    ]
    """
    Bank account verification method.
    """


class PaymentIntentUpdateParamsPaymentMethodOptionsAcssDebitMandateOptions(
    TypedDict,
):
    custom_mandate_url: NotRequired["Literal['']|str"]
    """
    A URL for custom mandate text to render during confirmation step.
    The URL will be rendered with additional GET parameters `payment_intent` and `payment_intent_client_secret` when confirming a Payment Intent,
    or `setup_intent` and `setup_intent_client_secret` when confirming a Setup Intent.
    """
    interval_description: NotRequired[str]
    """
    Description of the mandate interval. Only required if 'payment_schedule' parameter is 'interval' or 'combined'.
    """
    payment_schedule: NotRequired[Literal["combined", "interval", "sporadic"]]
    """
    Payment schedule for the mandate.
    """
    transaction_type: NotRequired[Literal["business", "personal"]]
    """
    Transaction type of the mandate.
    """


class PaymentIntentUpdateParamsPaymentMethodOptionsAffirm(TypedDict):
    capture_method: NotRequired["Literal['']|Literal['manual']"]
    """
    Controls when the funds are captured from the customer's account.

    If provided, this parameter overrides the behavior of the top-level [capture_method](https://docs.stripe.com/api/payment_intents/update#update_payment_intent-capture_method) for this payment method type when finalizing the payment with this payment method type.

    If `capture_method` is already set on the PaymentIntent, providing an empty value for this parameter unsets the stored value for this payment method type.
    """
    preferred_locale: NotRequired[str]
    """
    Preferred language of the Affirm authorization page that the customer is redirected to.
    """
    setup_future_usage: NotRequired[Literal["none"]]
    """
    Indicates that you intend to make future payments with this PaymentIntent's payment method.

    If you provide a Customer with the PaymentIntent, you can use this parameter to [attach the payment method](https://docs.stripe.com/payments/save-during-payment) to the Customer after the PaymentIntent is confirmed and the customer completes any required actions. If you don't provide a Customer, you can still [attach](https://docs.stripe.com/api/payment_methods/attach) the payment method to a Customer after the transaction completes.

    If the payment method is `card_present` and isn't a digital wallet, Stripe creates and attaches a [generated_card](https://docs.stripe.com/api/charges/object#charge_object-payment_method_details-card_present-generated_card) payment method representing the card to the Customer instead.

    When processing card payments, Stripe uses `setup_future_usage` to help you comply with regional legislation and network rules, such as [SCA](https://docs.stripe.com/strong-customer-authentication).

    If you've already set `setup_future_usage` and you're performing a request using a publishable key, you can only update the value from `on_session` to `off_session`.
    """


class PaymentIntentUpdateParamsPaymentMethodOptionsAfterpayClearpay(TypedDict):
    capture_method: NotRequired["Literal['']|Literal['manual']"]
    """
    Controls when the funds are captured from the customer's account.

    If provided, this parameter overrides the behavior of the top-level [capture_method](https://docs.stripe.com/api/payment_intents/update#update_payment_intent-capture_method) for this payment method type when finalizing the payment with this payment method type.

    If `capture_method` is already set on the PaymentIntent, providing an empty value for this parameter unsets the stored value for this payment method type.
    """
    reference: NotRequired[str]
    """
    An internal identifier or reference that this payment corresponds to. You must limit the identifier to 128 characters, and it can only contain letters, numbers, underscores, backslashes, and dashes.
    This field differs from the statement descriptor and item name.
    """
    setup_future_usage: NotRequired[Literal["none"]]
    """
    Indicates that you intend to make future payments with this PaymentIntent's payment method.

    If you provide a Customer with the PaymentIntent, you can use this parameter to [attach the payment method](https://docs.stripe.com/payments/save-during-payment) to the Customer after the PaymentIntent is confirmed and the customer completes any required actions. If you don't provide a Customer, you can still [attach](https://docs.stripe.com/api/payment_methods/attach) the payment method to a Customer after the transaction completes.

    If the payment method is `card_present` and isn't a digital wallet, Stripe creates and attaches a [generated_card](https://docs.stripe.com/api/charges/object#charge_object-payment_method_details-card_present-generated_card) payment method representing the card to the Customer instead.

    When processing card payments, Stripe uses `setup_future_usage` to help you comply with regional legislation and network rules, such as [SCA](https://docs.stripe.com/strong-customer-authentication).

    If you've already set `setup_future_usage` and you're performing a request using a publishable key, you can only update the value from `on_session` to `off_session`.
    """


class PaymentIntentUpdateParamsPaymentMethodOptionsAlipay(TypedDict):
    setup_future_usage: NotRequired[
        "Literal['']|Literal['none', 'off_session']"
    ]
    """
    Indicates that you intend to make future payments with this PaymentIntent's payment method.

    If you provide a Customer with the PaymentIntent, you can use this parameter to [attach the payment method](https://docs.stripe.com/payments/save-during-payment) to the Customer after the PaymentIntent is confirmed and the customer completes any required actions. If you don't provide a Customer, you can still [attach](https://docs.stripe.com/api/payment_methods/attach) the payment method to a Customer after the transaction completes.

    If the payment method is `card_present` and isn't a digital wallet, Stripe creates and attaches a [generated_card](https://docs.stripe.com/api/charges/object#charge_object-payment_method_details-card_present-generated_card) payment method representing the card to the Customer instead.

    When processing card payments, Stripe uses `setup_future_usage` to help you comply with regional legislation and network rules, such as [SCA](https://docs.stripe.com/strong-customer-authentication).

    If you've already set `setup_future_usage` and you're performing a request using a publishable key, you can only update the value from `on_session` to `off_session`.
    """


class PaymentIntentUpdateParamsPaymentMethodOptionsAlma(TypedDict):
    capture_method: NotRequired["Literal['']|Literal['manual']"]
    """
    Controls when the funds are captured from the customer's account.

    If provided, this parameter overrides the behavior of the top-level [capture_method](https://docs.stripe.com/api/payment_intents/update#update_payment_intent-capture_method) for this payment method type when finalizing the payment with this payment method type.

    If `capture_method` is already set on the PaymentIntent, providing an empty value for this parameter unsets the stored value for this payment method type.
    """


class PaymentIntentUpdateParamsPaymentMethodOptionsAmazonPay(TypedDict):
    capture_method: NotRequired["Literal['']|Literal['manual']"]
    """
    Controls when the funds are captured from the customer's account.

    If provided, this parameter overrides the behavior of the top-level [capture_method](https://docs.stripe.com/api/payment_intents/update#update_payment_intent-capture_method) for this payment method type when finalizing the payment with this payment method type.

    If `capture_method` is already set on the PaymentIntent, providing an empty value for this parameter unsets the stored value for this payment method type.
    """
    setup_future_usage: NotRequired[
        "Literal['']|Literal['none', 'off_session']"
    ]
    """
    Indicates that you intend to make future payments with this PaymentIntent's payment method.

    If you provide a Customer with the PaymentIntent, you can use this parameter to [attach the payment method](https://docs.stripe.com/payments/save-during-payment) to the Customer after the PaymentIntent is confirmed and the customer completes any required actions. If you don't provide a Customer, you can still [attach](https://docs.stripe.com/api/payment_methods/attach) the payment method to a Customer after the transaction completes.

    If the payment method is `card_present` and isn't a digital wallet, Stripe creates and attaches a [generated_card](https://docs.stripe.com/api/charges/object#charge_object-payment_method_details-card_present-generated_card) payment method representing the card to the Customer instead.

    When processing card payments, Stripe uses `setup_future_usage` to help you comply with regional legislation and network rules, such as [SCA](https://docs.stripe.com/strong-customer-authentication).
    """


class PaymentIntentUpdateParamsPaymentMethodOptionsAuBecsDebit(TypedDict):
    setup_future_usage: NotRequired[
        "Literal['']|Literal['none', 'off_session', 'on_session']"
    ]
    """
    Indicates that you intend to make future payments with this PaymentIntent's payment method.

    If you provide a Customer with the PaymentIntent, you can use this parameter to [attach the payment method](https://docs.stripe.com/payments/save-during-payment) to the Customer after the PaymentIntent is confirmed and the customer completes any required actions. If you don't provide a Customer, you can still [attach](https://docs.stripe.com/api/payment_methods/attach) the payment method to a Customer after the transaction completes.

    If the payment method is `card_present` and isn't a digital wallet, Stripe creates and attaches a [generated_card](https://docs.stripe.com/api/charges/object#charge_object-payment_method_details-card_present-generated_card) payment method representing the card to the Customer instead.

    When processing card payments, Stripe uses `setup_future_usage` to help you comply with regional legislation and network rules, such as [SCA](https://docs.stripe.com/strong-customer-authentication).

    If you've already set `setup_future_usage` and you're performing a request using a publishable key, you can only update the value from `on_session` to `off_session`.
    """
    target_date: NotRequired[str]
    """
    Controls when Stripe will attempt to debit the funds from the customer's account. The date must be a string in YYYY-MM-DD format. The date must be in the future and between 3 and 15 calendar days from now.
    """


class PaymentIntentUpdateParamsPaymentMethodOptionsBacsDebit(TypedDict):
    mandate_options: NotRequired[
        "PaymentIntentUpdateParamsPaymentMethodOptionsBacsDebitMandateOptions"
    ]
    """
    Additional fields for Mandate creation
    """
    setup_future_usage: NotRequired[
        "Literal['']|Literal['none', 'off_session', 'on_session']"
    ]
    """
    Indicates that you intend to make future payments with this PaymentIntent's payment method.

    If you provide a Customer with the PaymentIntent, you can use this parameter to [attach the payment method](https://docs.stripe.com/payments/save-during-payment) to the Customer after the PaymentIntent is confirmed and the customer completes any required actions. If you don't provide a Customer, you can still [attach](https://docs.stripe.com/api/payment_methods/attach) the payment method to a Customer after the transaction completes.

    If the payment method is `card_present` and isn't a digital wallet, Stripe creates and attaches a [generated_card](https://docs.stripe.com/api/charges/object#charge_object-payment_method_details-card_present-generated_card) payment method representing the card to the Customer instead.

    When processing card payments, Stripe uses `setup_future_usage` to help you comply with regional legislation and network rules, such as [SCA](https://docs.stripe.com/strong-customer-authentication).

    If you've already set `setup_future_usage` and you're performing a request using a publishable key, you can only update the value from `on_session` to `off_session`.
    """
    target_date: NotRequired[str]
    """
    Controls when Stripe will attempt to debit the funds from the customer's account. The date must be a string in YYYY-MM-DD format. The date must be in the future and between 3 and 15 calendar days from now.
    """


class PaymentIntentUpdateParamsPaymentMethodOptionsBacsDebitMandateOptions(
    TypedDict,
):
    reference_prefix: NotRequired["Literal['']|str"]
    """
    Prefix used to generate the Mandate reference. Must be at most 12 characters long. Must consist of only uppercase letters, numbers, spaces, or the following special characters: '/', '_', '-', '&', '.'. Cannot begin with 'DDIC' or 'STRIPE'.
    """


class PaymentIntentUpdateParamsPaymentMethodOptionsBancontact(TypedDict):
    preferred_language: NotRequired[Literal["de", "en", "fr", "nl"]]
    """
    Preferred language of the Bancontact authorization page that the customer is redirected to.
    """
    setup_future_usage: NotRequired[
        "Literal['']|Literal['none', 'off_session']"
    ]
    """
    Indicates that you intend to make future payments with this PaymentIntent's payment method.

    If you provide a Customer with the PaymentIntent, you can use this parameter to [attach the payment method](https://docs.stripe.com/payments/save-during-payment) to the Customer after the PaymentIntent is confirmed and the customer completes any required actions. If you don't provide a Customer, you can still [attach](https://docs.stripe.com/api/payment_methods/attach) the payment method to a Customer after the transaction completes.

    If the payment method is `card_present` and isn't a digital wallet, Stripe creates and attaches a [generated_card](https://docs.stripe.com/api/charges/object#charge_object-payment_method_details-card_present-generated_card) payment method representing the card to the Customer instead.

    When processing card payments, Stripe uses `setup_future_usage` to help you comply with regional legislation and network rules, such as [SCA](https://docs.stripe.com/strong-customer-authentication).

    If you've already set `setup_future_usage` and you're performing a request using a publishable key, you can only update the value from `on_session` to `off_session`.
    """


class PaymentIntentUpdateParamsPaymentMethodOptionsBillie(TypedDict):
    capture_method: NotRequired["Literal['']|Literal['manual']"]
    """
    Controls when the funds are captured from the customer's account.

    If provided, this parameter overrides the behavior of the top-level [capture_method](https://docs.stripe.com/api/payment_intents/update#update_payment_intent-capture_method) for this payment method type when finalizing the payment with this payment method type.

    If `capture_method` is already set on the PaymentIntent, providing an empty value for this parameter unsets the stored value for this payment method type.
    """


class PaymentIntentUpdateParamsPaymentMethodOptionsBlik(TypedDict):
    code: NotRequired[str]
    """
    The 6-digit BLIK code that a customer has generated using their banking application. Can only be set on confirmation.
    """
    setup_future_usage: NotRequired["Literal['']|Literal['none']"]
    """
    Indicates that you intend to make future payments with this PaymentIntent's payment method.

    If you provide a Customer with the PaymentIntent, you can use this parameter to [attach the payment method](https://docs.stripe.com/payments/save-during-payment) to the Customer after the PaymentIntent is confirmed and the customer completes any required actions. If you don't provide a Customer, you can still [attach](https://docs.stripe.com/api/payment_methods/attach) the payment method to a Customer after the transaction completes.

    If the payment method is `card_present` and isn't a digital wallet, Stripe creates and attaches a [generated_card](https://docs.stripe.com/api/charges/object#charge_object-payment_method_details-card_present-generated_card) payment method representing the card to the Customer instead.

    When processing card payments, Stripe uses `setup_future_usage` to help you comply with regional legislation and network rules, such as [SCA](https://docs.stripe.com/strong-customer-authentication).

    If you've already set `setup_future_usage` and you're performing a request using a publishable key, you can only update the value from `on_session` to `off_session`.
    """


class PaymentIntentUpdateParamsPaymentMethodOptionsBoleto(TypedDict):
    expires_after_days: NotRequired[int]
    """
    The number of calendar days before a Boleto voucher expires. For example, if you create a Boleto voucher on Monday and you set expires_after_days to 2, the Boleto invoice will expire on Wednesday at 23:59 America/Sao_Paulo time.
    """
    setup_future_usage: NotRequired[
        "Literal['']|Literal['none', 'off_session', 'on_session']"
    ]
    """
    Indicates that you intend to make future payments with this PaymentIntent's payment method.

    If you provide a Customer with the PaymentIntent, you can use this parameter to [attach the payment method](https://docs.stripe.com/payments/save-during-payment) to the Customer after the PaymentIntent is confirmed and the customer completes any required actions. If you don't provide a Customer, you can still [attach](https://docs.stripe.com/api/payment_methods/attach) the payment method to a Customer after the transaction completes.

    If the payment method is `card_present` and isn't a digital wallet, Stripe creates and attaches a [generated_card](https://docs.stripe.com/api/charges/object#charge_object-payment_method_details-card_present-generated_card) payment method representing the card to the Customer instead.

    When processing card payments, Stripe uses `setup_future_usage` to help you comply with regional legislation and network rules, such as [SCA](https://docs.stripe.com/strong-customer-authentication).

    If you've already set `setup_future_usage` and you're performing a request using a publishable key, you can only update the value from `on_session` to `off_session`.
    """


class PaymentIntentUpdateParamsPaymentMethodOptionsCard(TypedDict):
    capture_method: NotRequired["Literal['']|Literal['manual']"]
    """
    Controls when the funds are captured from the customer's account.

    If provided, this parameter overrides the behavior of the top-level [capture_method](https://docs.stripe.com/api/payment_intents/update#update_payment_intent-capture_method) for this payment method type when finalizing the payment with this payment method type.

    If `capture_method` is already set on the PaymentIntent, providing an empty value for this parameter unsets the stored value for this payment method type.
    """
    cvc_token: NotRequired[str]
    """
    A single-use `cvc_update` Token that represents a card CVC value. When provided, the CVC value will be verified during the card payment attempt. This parameter can only be provided during confirmation.
    """
    installments: NotRequired[
        "PaymentIntentUpdateParamsPaymentMethodOptionsCardInstallments"
    ]
    """
    Installment configuration for payments attempted on this PaymentIntent.

    For more information, see the [installments integration guide](https://docs.stripe.com/payments/installments).
    """
    mandate_options: NotRequired[
        "PaymentIntentUpdateParamsPaymentMethodOptionsCardMandateOptions"
    ]
    """
    Configuration options for setting up an eMandate for cards issued in India.
    """
    moto: NotRequired[bool]
    """
    When specified, this parameter indicates that a transaction will be marked
    as MOTO (Mail Order Telephone Order) and thus out of scope for SCA. This
    parameter can only be provided during confirmation.
    """
    network: NotRequired[
        Literal[
            "amex",
            "cartes_bancaires",
            "diners",
            "discover",
            "eftpos_au",
            "girocard",
            "interac",
            "jcb",
            "link",
            "mastercard",
            "unionpay",
            "unknown",
            "visa",
        ]
    ]
    """
    Selected network to process this PaymentIntent on. Depends on the available networks of the card attached to the PaymentIntent. Can be only set confirm-time.
    """
    request_extended_authorization: NotRequired[
        Literal["if_available", "never"]
    ]
    """
    Request ability to [capture beyond the standard authorization validity window](https://docs.stripe.com/payments/extended-authorization) for this PaymentIntent.
    """
    request_incremental_authorization: NotRequired[
        Literal["if_available", "never"]
    ]
    """
    Request ability to [increment the authorization](https://docs.stripe.com/payments/incremental-authorization) for this PaymentIntent.
    """
    request_multicapture: NotRequired[Literal["if_available", "never"]]
    """
    Request ability to make [multiple captures](https://docs.stripe.com/payments/multicapture) for this PaymentIntent.
    """
    request_overcapture: NotRequired[Literal["if_available", "never"]]
    """
    Request ability to [overcapture](https://docs.stripe.com/payments/overcapture) for this PaymentIntent.
    """
    request_three_d_secure: NotRequired[
        Literal["any", "automatic", "challenge"]
    ]
    """
    We strongly recommend that you rely on our SCA Engine to automatically prompt your customers for authentication based on risk level and [other requirements](https://docs.stripe.com/strong-customer-authentication). However, if you wish to request 3D Secure based on logic from your own fraud engine, provide this option. If not provided, this value defaults to `automatic`. Read our guide on [manually requesting 3D Secure](https://docs.stripe.com/payments/3d-secure/authentication-flow#manual-three-ds) for more information on how this configuration interacts with Radar and our SCA Engine.
    """
    require_cvc_recollection: NotRequired[bool]
    """
    When enabled, using a card that is attached to a customer will require the CVC to be provided again (i.e. using the cvc_token parameter).
    """
    setup_future_usage: NotRequired[
        "Literal['']|Literal['none', 'off_session', 'on_session']"
    ]
    """
    Indicates that you intend to make future payments with this PaymentIntent's payment method.

    If you provide a Customer with the PaymentIntent, you can use this parameter to [attach the payment method](https://docs.stripe.com/payments/save-during-payment) to the Customer after the PaymentIntent is confirmed and the customer completes any required actions. If you don't provide a Customer, you can still [attach](https://docs.stripe.com/api/payment_methods/attach) the payment method to a Customer after the transaction completes.

    If the payment method is `card_present` and isn't a digital wallet, Stripe creates and attaches a [generated_card](https://docs.stripe.com/api/charges/object#charge_object-payment_method_details-card_present-generated_card) payment method representing the card to the Customer instead.

    When processing card payments, Stripe uses `setup_future_usage` to help you comply with regional legislation and network rules, such as [SCA](https://docs.stripe.com/strong-customer-authentication).

    If you've already set `setup_future_usage` and you're performing a request using a publishable key, you can only update the value from `on_session` to `off_session`.
    """
    statement_descriptor_suffix_kana: NotRequired["Literal['']|str"]
    """
    Provides information about a card payment that customers see on their statements. Concatenated with the Kana prefix (shortened Kana descriptor) or Kana statement descriptor that's set on the account to form the complete statement descriptor. Maximum 22 characters. On card statements, the *concatenation* of both prefix and suffix (including separators) will appear truncated to 22 characters.
    """
    statement_descriptor_suffix_kanji: NotRequired["Literal['']|str"]
    """
    Provides information about a card payment that customers see on their statements. Concatenated with the Kanji prefix (shortened Kanji descriptor) or Kanji statement descriptor that's set on the account to form the complete statement descriptor. Maximum 17 characters. On card statements, the *concatenation* of both prefix and suffix (including separators) will appear truncated to 17 characters.
    """
    three_d_secure: NotRequired[
        "PaymentIntentUpdateParamsPaymentMethodOptionsCardThreeDSecure"
    ]
    """
    If 3D Secure authentication was performed with a third-party provider,
    the authentication details to use for this payment.
    """


class PaymentIntentUpdateParamsPaymentMethodOptionsCardInstallments(TypedDict):
    enabled: NotRequired[bool]
    """
    Setting to true enables installments for this PaymentIntent.
    This will cause the response to contain a list of available installment plans.
    Setting to false will prevent any selected plan from applying to a charge.
    """
    plan: NotRequired[
        "Literal['']|PaymentIntentUpdateParamsPaymentMethodOptionsCardInstallmentsPlan"
    ]
    """
    The selected installment plan to use for this payment attempt.
    This parameter can only be provided during confirmation.
    """


class PaymentIntentUpdateParamsPaymentMethodOptionsCardInstallmentsPlan(
    TypedDict,
):
    count: NotRequired[int]
    """
    For `fixed_count` installment plans, this is required. It represents the number of installment payments your customer will make to their credit card.
    """
    interval: NotRequired[Literal["month"]]
    """
    For `fixed_count` installment plans, this is required. It represents the interval between installment payments your customer will make to their credit card.
    One of `month`.
    """
    type: Literal["bonus", "fixed_count", "revolving"]
    """
    Type of installment plan, one of `fixed_count`, `bonus`, or `revolving`.
    """


class PaymentIntentUpdateParamsPaymentMethodOptionsCardMandateOptions(
    TypedDict,
):
    amount: int
    """
    Amount to be charged for future payments.
    """
    amount_type: Literal["fixed", "maximum"]
    """
    One of `fixed` or `maximum`. If `fixed`, the `amount` param refers to the exact amount to be charged in future payments. If `maximum`, the amount charged can be up to the value passed for the `amount` param.
    """
    description: NotRequired[str]
    """
    A description of the mandate or subscription that is meant to be displayed to the customer.
    """
    end_date: NotRequired[int]
    """
    End date of the mandate or subscription. If not provided, the mandate will be active until canceled. If provided, end date should be after start date.
    """
    interval: Literal["day", "month", "sporadic", "week", "year"]
    """
    Specifies payment frequency. One of `day`, `week`, `month`, `year`, or `sporadic`.
    """
    interval_count: NotRequired[int]
    """
    The number of intervals between payments. For example, `interval=month` and `interval_count=3` indicates one payment every three months. Maximum of one year interval allowed (1 year, 12 months, or 52 weeks). This parameter is optional when `interval=sporadic`.
    """
    reference: str
    """
    Unique identifier for the mandate or subscription.
    """
    start_date: int
    """
    Start date of the mandate or subscription. Start date should not be lesser than yesterday.
    """
    supported_types: NotRequired[List[Literal["india"]]]
    """
    Specifies the type of mandates supported. Possible values are `india`.
    """


class PaymentIntentUpdateParamsPaymentMethodOptionsCardThreeDSecure(TypedDict):
    ares_trans_status: NotRequired[Literal["A", "C", "I", "N", "R", "U", "Y"]]
    """
    The `transStatus` returned from the card Issuer's ACS in the ARes.
    """
    cryptogram: str
    """
    The cryptogram, also known as the "authentication value" (AAV, CAVV or
    AEVV). This value is 20 bytes, base64-encoded into a 28-character string.
    (Most 3D Secure providers will return the base64-encoded version, which
    is what you should specify here.)
    """
    electronic_commerce_indicator: NotRequired[
        Literal["01", "02", "05", "06", "07"]
    ]
    """
    The Electronic Commerce Indicator (ECI) is returned by your 3D Secure
    provider and indicates what degree of authentication was performed.
    """
    exemption_indicator: NotRequired[Literal["low_risk", "none"]]
    """
    The exemption requested via 3DS and accepted by the issuer at authentication time.
    """
    network_options: NotRequired[
        "PaymentIntentUpdateParamsPaymentMethodOptionsCardThreeDSecureNetworkOptions"
    ]
    """
    Network specific 3DS fields. Network specific arguments require an
    explicit card brand choice. The parameter `payment_method_options.card.network``
    must be populated accordingly
    """
    requestor_challenge_indicator: NotRequired[str]
    """
    The challenge indicator (`threeDSRequestorChallengeInd`) which was requested in the
    AReq sent to the card Issuer's ACS. A string containing 2 digits from 01-99.
    """
    transaction_id: str
    """
    For 3D Secure 1, the XID. For 3D Secure 2, the Directory Server
    Transaction ID (dsTransID).
    """
    version: Literal["1.0.2", "2.1.0", "2.2.0", "2.3.0", "2.3.1"]
    """
    The version of 3D Secure that was performed.
    """


class PaymentIntentUpdateParamsPaymentMethodOptionsCardThreeDSecureNetworkOptions(
    TypedDict,
):
    cartes_bancaires: NotRequired[
        "PaymentIntentUpdateParamsPaymentMethodOptionsCardThreeDSecureNetworkOptionsCartesBancaires"
    ]
    """
    Cartes Bancaires-specific 3DS fields.
    """


class PaymentIntentUpdateParamsPaymentMethodOptionsCardThreeDSecureNetworkOptionsCartesBancaires(
    TypedDict,
):
    cb_avalgo: Literal["0", "1", "2", "3", "4", "A"]
    """
    The cryptogram calculation algorithm used by the card Issuer's ACS
    to calculate the Authentication cryptogram. Also known as `cavvAlgorithm`.
    messageExtension: CB-AVALGO
    """
    cb_exemption: NotRequired[str]
    """
    The exemption indicator returned from Cartes Bancaires in the ARes.
    message extension: CB-EXEMPTION; string (4 characters)
    This is a 3 byte bitmap (low significant byte first and most significant
    bit first) that has been Base64 encoded
    """
    cb_score: NotRequired[int]
    """
    The risk score returned from Cartes Bancaires in the ARes.
    message extension: CB-SCORE; numeric value 0-99
    """


class PaymentIntentUpdateParamsPaymentMethodOptionsCardPresent(TypedDict):
    capture_method: NotRequired[Literal["manual", "manual_preferred"]]
    """
    Controls when the funds are captured from the customer's account.

    If provided, this parameter overrides the behavior of the top-level [capture_method](https://docs.stripe.com/api/payment_intents/update#update_payment_intent-capture_method) for this payment method type when finalizing the payment with this payment method type.

    If `capture_method` is already set on the PaymentIntent, providing an empty value for this parameter unsets the stored value for this payment method type.
    """
    request_extended_authorization: NotRequired[bool]
    """
    Request ability to capture this payment beyond the standard [authorization validity window](https://docs.stripe.com/terminal/features/extended-authorizations#authorization-validity)
    """
    request_incremental_authorization_support: NotRequired[bool]
    """
    Request ability to [increment](https://docs.stripe.com/terminal/features/incremental-authorizations) this PaymentIntent if the combination of MCC and card brand is eligible. Check [incremental_authorization_supported](https://docs.stripe.com/api/charges/object#charge_object-payment_method_details-card_present-incremental_authorization_supported) in the [Confirm](https://docs.stripe.com/api/payment_intents/confirm) response to verify support.
    """
    routing: NotRequired[
        "PaymentIntentUpdateParamsPaymentMethodOptionsCardPresentRouting"
    ]
    """
    Network routing priority on co-branded EMV cards supporting domestic debit and international card schemes.
    """


class PaymentIntentUpdateParamsPaymentMethodOptionsCardPresentRouting(
    TypedDict,
):
    requested_priority: NotRequired[Literal["domestic", "international"]]
    """
    Routing requested priority
    """


class PaymentIntentUpdateParamsPaymentMethodOptionsCashapp(TypedDict):
    capture_method: NotRequired["Literal['']|Literal['manual']"]
    """
    Controls when the funds are captured from the customer's account.

    If provided, this parameter overrides the behavior of the top-level [capture_method](https://docs.stripe.com/api/payment_intents/update#update_payment_intent-capture_method) for this payment method type when finalizing the payment with this payment method type.

    If `capture_method` is already set on the PaymentIntent, providing an empty value for this parameter unsets the stored value for this payment method type.
    """
    setup_future_usage: NotRequired[
        "Literal['']|Literal['none', 'off_session', 'on_session']"
    ]
    """
    Indicates that you intend to make future payments with this PaymentIntent's payment method.

    If you provide a Customer with the PaymentIntent, you can use this parameter to [attach the payment method](https://docs.stripe.com/payments/save-during-payment) to the Customer after the PaymentIntent is confirmed and the customer completes any required actions. If you don't provide a Customer, you can still [attach](https://docs.stripe.com/api/payment_methods/attach) the payment method to a Customer after the transaction completes.

    If the payment method is `card_present` and isn't a digital wallet, Stripe creates and attaches a [generated_card](https://docs.stripe.com/api/charges/object#charge_object-payment_method_details-card_present-generated_card) payment method representing the card to the Customer instead.

    When processing card payments, Stripe uses `setup_future_usage` to help you comply with regional legislation and network rules, such as [SCA](https://docs.stripe.com/strong-customer-authentication).

    If you've already set `setup_future_usage` and you're performing a request using a publishable key, you can only update the value from `on_session` to `off_session`.
    """


class PaymentIntentUpdateParamsPaymentMethodOptionsCrypto(TypedDict):
    setup_future_usage: NotRequired[Literal["none"]]
    """
    Indicates that you intend to make future payments with this PaymentIntent's payment method.

    If you provide a Customer with the PaymentIntent, you can use this parameter to [attach the payment method](https://docs.stripe.com/payments/save-during-payment) to the Customer after the PaymentIntent is confirmed and the customer completes any required actions. If you don't provide a Customer, you can still [attach](https://docs.stripe.com/api/payment_methods/attach) the payment method to a Customer after the transaction completes.

    If the payment method is `card_present` and isn't a digital wallet, Stripe creates and attaches a [generated_card](https://docs.stripe.com/api/charges/object#charge_object-payment_method_details-card_present-generated_card) payment method representing the card to the Customer instead.

    When processing card payments, Stripe uses `setup_future_usage` to help you comply with regional legislation and network rules, such as [SCA](https://docs.stripe.com/strong-customer-authentication).

    If you've already set `setup_future_usage` and you're performing a request using a publishable key, you can only update the value from `on_session` to `off_session`.
    """


class PaymentIntentUpdateParamsPaymentMethodOptionsCustomerBalance(TypedDict):
    bank_transfer: NotRequired[
        "PaymentIntentUpdateParamsPaymentMethodOptionsCustomerBalanceBankTransfer"
    ]
    """
    Configuration for the bank transfer funding type, if the `funding_type` is set to `bank_transfer`.
    """
    funding_type: NotRequired[Literal["bank_transfer"]]
    """
    The funding method type to be used when there are not enough funds in the customer balance. Permitted values include: `bank_transfer`.
    """
    setup_future_usage: NotRequired[Literal["none"]]
    """
    Indicates that you intend to make future payments with this PaymentIntent's payment method.

    If you provide a Customer with the PaymentIntent, you can use this parameter to [attach the payment method](https://docs.stripe.com/payments/save-during-payment) to the Customer after the PaymentIntent is confirmed and the customer completes any required actions. If you don't provide a Customer, you can still [attach](https://docs.stripe.com/api/payment_methods/attach) the payment method to a Customer after the transaction completes.

    If the payment method is `card_present` and isn't a digital wallet, Stripe creates and attaches a [generated_card](https://docs.stripe.com/api/charges/object#charge_object-payment_method_details-card_present-generated_card) payment method representing the card to the Customer instead.

    When processing card payments, Stripe uses `setup_future_usage` to help you comply with regional legislation and network rules, such as [SCA](https://docs.stripe.com/strong-customer-authentication).

    If you've already set `setup_future_usage` and you're performing a request using a publishable key, you can only update the value from `on_session` to `off_session`.
    """


class PaymentIntentUpdateParamsPaymentMethodOptionsCustomerBalanceBankTransfer(
    TypedDict,
):
    eu_bank_transfer: NotRequired[
        "PaymentIntentUpdateParamsPaymentMethodOptionsCustomerBalanceBankTransferEuBankTransfer"
    ]
    """
    Configuration for the eu_bank_transfer funding type.
    """
    requested_address_types: NotRequired[
        List[
            Literal[
                "aba", "iban", "sepa", "sort_code", "spei", "swift", "zengin"
            ]
        ]
    ]
    """
    List of address types that should be returned in the financial_addresses response. If not specified, all valid types will be returned.

    Permitted values include: `sort_code`, `zengin`, `iban`, or `spei`.
    """
    type: Literal[
        "eu_bank_transfer",
        "gb_bank_transfer",
        "jp_bank_transfer",
        "mx_bank_transfer",
        "us_bank_transfer",
    ]
    """
    The list of bank transfer types that this PaymentIntent is allowed to use for funding Permitted values include: `eu_bank_transfer`, `gb_bank_transfer`, `jp_bank_transfer`, `mx_bank_transfer`, or `us_bank_transfer`.
    """


class PaymentIntentUpdateParamsPaymentMethodOptionsCustomerBalanceBankTransferEuBankTransfer(
    TypedDict,
):
    country: str
    """
    The desired country code of the bank account information. Permitted values include: `DE`, `FR`, `IE`, or `NL`.
    """


class PaymentIntentUpdateParamsPaymentMethodOptionsEps(TypedDict):
    setup_future_usage: NotRequired[Literal["none"]]
    """
    Indicates that you intend to make future payments with this PaymentIntent's payment method.

    If you provide a Customer with the PaymentIntent, you can use this parameter to [attach the payment method](https://docs.stripe.com/payments/save-during-payment) to the Customer after the PaymentIntent is confirmed and the customer completes any required actions. If you don't provide a Customer, you can still [attach](https://docs.stripe.com/api/payment_methods/attach) the payment method to a Customer after the transaction completes.

    If the payment method is `card_present` and isn't a digital wallet, Stripe creates and attaches a [generated_card](https://docs.stripe.com/api/charges/object#charge_object-payment_method_details-card_present-generated_card) payment method representing the card to the Customer instead.

    When processing card payments, Stripe uses `setup_future_usage` to help you comply with regional legislation and network rules, such as [SCA](https://docs.stripe.com/strong-customer-authentication).

    If you've already set `setup_future_usage` and you're performing a request using a publishable key, you can only update the value from `on_session` to `off_session`.
    """


class PaymentIntentUpdateParamsPaymentMethodOptionsFpx(TypedDict):
    setup_future_usage: NotRequired[Literal["none"]]
    """
    Indicates that you intend to make future payments with this PaymentIntent's payment method.

    If you provide a Customer with the PaymentIntent, you can use this parameter to [attach the payment method](https://docs.stripe.com/payments/save-during-payment) to the Customer after the PaymentIntent is confirmed and the customer completes any required actions. If you don't provide a Customer, you can still [attach](https://docs.stripe.com/api/payment_methods/attach) the payment method to a Customer after the transaction completes.

    If the payment method is `card_present` and isn't a digital wallet, Stripe creates and attaches a [generated_card](https://docs.stripe.com/api/charges/object#charge_object-payment_method_details-card_present-generated_card) payment method representing the card to the Customer instead.

    When processing card payments, Stripe uses `setup_future_usage` to help you comply with regional legislation and network rules, such as [SCA](https://docs.stripe.com/strong-customer-authentication).

    If you've already set `setup_future_usage` and you're performing a request using a publishable key, you can only update the value from `on_session` to `off_session`.
    """


class PaymentIntentUpdateParamsPaymentMethodOptionsGiropay(TypedDict):
    setup_future_usage: NotRequired[Literal["none"]]
    """
    Indicates that you intend to make future payments with this PaymentIntent's payment method.

    If you provide a Customer with the PaymentIntent, you can use this parameter to [attach the payment method](https://docs.stripe.com/payments/save-during-payment) to the Customer after the PaymentIntent is confirmed and the customer completes any required actions. If you don't provide a Customer, you can still [attach](https://docs.stripe.com/api/payment_methods/attach) the payment method to a Customer after the transaction completes.

    If the payment method is `card_present` and isn't a digital wallet, Stripe creates and attaches a [generated_card](https://docs.stripe.com/api/charges/object#charge_object-payment_method_details-card_present-generated_card) payment method representing the card to the Customer instead.

    When processing card payments, Stripe uses `setup_future_usage` to help you comply with regional legislation and network rules, such as [SCA](https://docs.stripe.com/strong-customer-authentication).

    If you've already set `setup_future_usage` and you're performing a request using a publishable key, you can only update the value from `on_session` to `off_session`.
    """


class PaymentIntentUpdateParamsPaymentMethodOptionsGrabpay(TypedDict):
    setup_future_usage: NotRequired[Literal["none"]]
    """
    Indicates that you intend to make future payments with this PaymentIntent's payment method.

    If you provide a Customer with the PaymentIntent, you can use this parameter to [attach the payment method](https://docs.stripe.com/payments/save-during-payment) to the Customer after the PaymentIntent is confirmed and the customer completes any required actions. If you don't provide a Customer, you can still [attach](https://docs.stripe.com/api/payment_methods/attach) the payment method to a Customer after the transaction completes.

    If the payment method is `card_present` and isn't a digital wallet, Stripe creates and attaches a [generated_card](https://docs.stripe.com/api/charges/object#charge_object-payment_method_details-card_present-generated_card) payment method representing the card to the Customer instead.

    When processing card payments, Stripe uses `setup_future_usage` to help you comply with regional legislation and network rules, such as [SCA](https://docs.stripe.com/strong-customer-authentication).

    If you've already set `setup_future_usage` and you're performing a request using a publishable key, you can only update the value from `on_session` to `off_session`.
    """


class PaymentIntentUpdateParamsPaymentMethodOptionsIdeal(TypedDict):
    setup_future_usage: NotRequired[
        "Literal['']|Literal['none', 'off_session']"
    ]
    """
    Indicates that you intend to make future payments with this PaymentIntent's payment method.

    If you provide a Customer with the PaymentIntent, you can use this parameter to [attach the payment method](https://docs.stripe.com/payments/save-during-payment) to the Customer after the PaymentIntent is confirmed and the customer completes any required actions. If you don't provide a Customer, you can still [attach](https://docs.stripe.com/api/payment_methods/attach) the payment method to a Customer after the transaction completes.

    If the payment method is `card_present` and isn't a digital wallet, Stripe creates and attaches a [generated_card](https://docs.stripe.com/api/charges/object#charge_object-payment_method_details-card_present-generated_card) payment method representing the card to the Customer instead.

    When processing card payments, Stripe uses `setup_future_usage` to help you comply with regional legislation and network rules, such as [SCA](https://docs.stripe.com/strong-customer-authentication).

    If you've already set `setup_future_usage` and you're performing a request using a publishable key, you can only update the value from `on_session` to `off_session`.
    """


class PaymentIntentUpdateParamsPaymentMethodOptionsInteracPresent(TypedDict):
    pass


class PaymentIntentUpdateParamsPaymentMethodOptionsKakaoPay(TypedDict):
    capture_method: NotRequired["Literal['']|Literal['manual']"]
    """
    Controls when the funds are captured from the customer's account.

    If provided, this parameter overrides the behavior of the top-level [capture_method](https://docs.stripe.com/api/payment_intents/update#update_payment_intent-capture_method) for this payment method type when finalizing the payment with this payment method type.

    If `capture_method` is already set on the PaymentIntent, providing an empty value for this parameter unsets the stored value for this payment method type.
    """
    setup_future_usage: NotRequired[
        "Literal['']|Literal['none', 'off_session']"
    ]
    """
    Indicates that you intend to make future payments with this PaymentIntent's payment method.

    If you provide a Customer with the PaymentIntent, you can use this parameter to [attach the payment method](https://docs.stripe.com/payments/save-during-payment) to the Customer after the PaymentIntent is confirmed and the customer completes any required actions. If you don't provide a Customer, you can still [attach](https://docs.stripe.com/api/payment_methods/attach) the payment method to a Customer after the transaction completes.

    If the payment method is `card_present` and isn't a digital wallet, Stripe creates and attaches a [generated_card](https://docs.stripe.com/api/charges/object#charge_object-payment_method_details-card_present-generated_card) payment method representing the card to the Customer instead.

    When processing card payments, Stripe uses `setup_future_usage` to help you comply with regional legislation and network rules, such as [SCA](https://docs.stripe.com/strong-customer-authentication).
    """


class PaymentIntentUpdateParamsPaymentMethodOptionsKlarna(TypedDict):
    capture_method: NotRequired["Literal['']|Literal['manual']"]
    """
    Controls when the funds are captured from the customer's account.

    If provided, this parameter overrides the behavior of the top-level [capture_method](https://docs.stripe.com/api/payment_intents/update#update_payment_intent-capture_method) for this payment method type when finalizing the payment with this payment method type.

    If `capture_method` is already set on the PaymentIntent, providing an empty value for this parameter unsets the stored value for this payment method type.
    """
    on_demand: NotRequired[
        "PaymentIntentUpdateParamsPaymentMethodOptionsKlarnaOnDemand"
    ]
    """
    On-demand details if setting up or charging an on-demand payment.
    """
    preferred_locale: NotRequired[
        Literal[
            "cs-CZ",
            "da-DK",
            "de-AT",
            "de-CH",
            "de-DE",
            "el-GR",
            "en-AT",
            "en-AU",
            "en-BE",
            "en-CA",
            "en-CH",
            "en-CZ",
            "en-DE",
            "en-DK",
            "en-ES",
            "en-FI",
            "en-FR",
            "en-GB",
            "en-GR",
            "en-IE",
            "en-IT",
            "en-NL",
            "en-NO",
            "en-NZ",
            "en-PL",
            "en-PT",
            "en-RO",
            "en-SE",
            "en-US",
            "es-ES",
            "es-US",
            "fi-FI",
            "fr-BE",
            "fr-CA",
            "fr-CH",
            "fr-FR",
            "it-CH",
            "it-IT",
            "nb-NO",
            "nl-BE",
            "nl-NL",
            "pl-PL",
            "pt-PT",
            "ro-RO",
            "sv-FI",
            "sv-SE",
        ]
    ]
    """
    Preferred language of the Klarna authorization page that the customer is redirected to
    """
    setup_future_usage: NotRequired[
        Literal["none", "off_session", "on_session"]
    ]
    """
    Indicates that you intend to make future payments with this PaymentIntent's payment method.

    If you provide a Customer with the PaymentIntent, you can use this parameter to [attach the payment method](https://docs.stripe.com/payments/save-during-payment) to the Customer after the PaymentIntent is confirmed and the customer completes any required actions. If you don't provide a Customer, you can still [attach](https://docs.stripe.com/api/payment_methods/attach) the payment method to a Customer after the transaction completes.

    If the payment method is `card_present` and isn't a digital wallet, Stripe creates and attaches a [generated_card](https://docs.stripe.com/api/charges/object#charge_object-payment_method_details-card_present-generated_card) payment method representing the card to the Customer instead.

    When processing card payments, Stripe uses `setup_future_usage` to help you comply with regional legislation and network rules, such as [SCA](https://docs.stripe.com/strong-customer-authentication).

    If you've already set `setup_future_usage` and you're performing a request using a publishable key, you can only update the value from `on_session` to `off_session`.
    """
    subscriptions: NotRequired[
        "Literal['']|List[PaymentIntentUpdateParamsPaymentMethodOptionsKlarnaSubscription]"
    ]
    """
    Subscription details if setting up or charging a subscription.
    """


class PaymentIntentUpdateParamsPaymentMethodOptionsKlarnaOnDemand(TypedDict):
    average_amount: NotRequired[int]
    """
    Your average amount value. You can use a value across your customer base, or segment based on customer type, country, etc.
    """
    maximum_amount: NotRequired[int]
    """
    The maximum value you may charge a customer per purchase. You can use a value across your customer base, or segment based on customer type, country, etc.
    """
    minimum_amount: NotRequired[int]
    """
    The lowest or minimum value you may charge a customer per purchase. You can use a value across your customer base, or segment based on customer type, country, etc.
    """
    purchase_interval: NotRequired[Literal["day", "month", "week", "year"]]
    """
    Interval at which the customer is making purchases
    """
    purchase_interval_count: NotRequired[int]
    """
    The number of `purchase_interval` between charges
    """


class PaymentIntentUpdateParamsPaymentMethodOptionsKlarnaSubscription(
    TypedDict,
):
    interval: Literal["day", "month", "week", "year"]
    """
    Unit of time between subscription charges.
    """
    interval_count: NotRequired[int]
    """
    The number of intervals (specified in the `interval` attribute) between subscription charges. For example, `interval=month` and `interval_count=3` charges every 3 months.
    """
    name: NotRequired[str]
    """
    Name for subscription.
    """
    next_billing: NotRequired[
        "PaymentIntentUpdateParamsPaymentMethodOptionsKlarnaSubscriptionNextBilling"
    ]
    """
    Describes the upcoming charge for this subscription.
    """
    reference: str
    """
    A non-customer-facing reference to correlate subscription charges in the Klarna app. Use a value that persists across subscription charges.
    """


class PaymentIntentUpdateParamsPaymentMethodOptionsKlarnaSubscriptionNextBilling(
    TypedDict,
):
    amount: int
    """
    The amount of the next charge for the subscription.
    """
    date: str
    """
    The date of the next charge for the subscription in YYYY-MM-DD format.
    """


class PaymentIntentUpdateParamsPaymentMethodOptionsKonbini(TypedDict):
    confirmation_number: NotRequired["Literal['']|str"]
    """
    An optional 10 to 11 digit numeric-only string determining the confirmation code at applicable convenience stores. Must not consist of only zeroes and could be rejected in case of insufficient uniqueness. We recommend to use the customer's phone number.
    """
    expires_after_days: NotRequired["Literal['']|int"]
    """
    The number of calendar days (between 1 and 60) after which Konbini payment instructions will expire. For example, if a PaymentIntent is confirmed with Konbini and `expires_after_days` set to 2 on Monday JST, the instructions will expire on Wednesday 23:59:59 JST. Defaults to 3 days.
    """
    expires_at: NotRequired["Literal['']|int"]
    """
    The timestamp at which the Konbini payment instructions will expire. Only one of `expires_after_days` or `expires_at` may be set.
    """
    product_description: NotRequired["Literal['']|str"]
    """
    A product descriptor of up to 22 characters, which will appear to customers at the convenience store.
    """
    setup_future_usage: NotRequired[Literal["none"]]
    """
    Indicates that you intend to make future payments with this PaymentIntent's payment method.

    If you provide a Customer with the PaymentIntent, you can use this parameter to [attach the payment method](https://docs.stripe.com/payments/save-during-payment) to the Customer after the PaymentIntent is confirmed and the customer completes any required actions. If you don't provide a Customer, you can still [attach](https://docs.stripe.com/api/payment_methods/attach) the payment method to a Customer after the transaction completes.

    If the payment method is `card_present` and isn't a digital wallet, Stripe creates and attaches a [generated_card](https://docs.stripe.com/api/charges/object#charge_object-payment_method_details-card_present-generated_card) payment method representing the card to the Customer instead.

    When processing card payments, Stripe uses `setup_future_usage` to help you comply with regional legislation and network rules, such as [SCA](https://docs.stripe.com/strong-customer-authentication).

    If you've already set `setup_future_usage` and you're performing a request using a publishable key, you can only update the value from `on_session` to `off_session`.
    """


class PaymentIntentUpdateParamsPaymentMethodOptionsKrCard(TypedDict):
    capture_method: NotRequired["Literal['']|Literal['manual']"]
    """
    Controls when the funds are captured from the customer's account.

    If provided, this parameter overrides the behavior of the top-level [capture_method](https://docs.stripe.com/api/payment_intents/update#update_payment_intent-capture_method) for this payment method type when finalizing the payment with this payment method type.

    If `capture_method` is already set on the PaymentIntent, providing an empty value for this parameter unsets the stored value for this payment method type.
    """
    setup_future_usage: NotRequired[
        "Literal['']|Literal['none', 'off_session']"
    ]
    """
    Indicates that you intend to make future payments with this PaymentIntent's payment method.

    If you provide a Customer with the PaymentIntent, you can use this parameter to [attach the payment method](https://docs.stripe.com/payments/save-during-payment) to the Customer after the PaymentIntent is confirmed and the customer completes any required actions. If you don't provide a Customer, you can still [attach](https://docs.stripe.com/api/payment_methods/attach) the payment method to a Customer after the transaction completes.

    If the payment method is `card_present` and isn't a digital wallet, Stripe creates and attaches a [generated_card](https://docs.stripe.com/api/charges/object#charge_object-payment_method_details-card_present-generated_card) payment method representing the card to the Customer instead.

    When processing card payments, Stripe uses `setup_future_usage` to help you comply with regional legislation and network rules, such as [SCA](https://docs.stripe.com/strong-customer-authentication).
    """


class PaymentIntentUpdateParamsPaymentMethodOptionsLink(TypedDict):
    capture_method: NotRequired["Literal['']|Literal['manual']"]
    """
    Controls when the funds are captured from the customer's account.

    If provided, this parameter overrides the behavior of the top-level [capture_method](https://docs.stripe.com/api/payment_intents/update#update_payment_intent-capture_method) for this payment method type when finalizing the payment with this payment method type.

    If `capture_method` is already set on the PaymentIntent, providing an empty value for this parameter unsets the stored value for this payment method type.
    """
    persistent_token: NotRequired[str]
    """
    [Deprecated] This is a legacy parameter that no longer has any function.
    """
    setup_future_usage: NotRequired[
        "Literal['']|Literal['none', 'off_session']"
    ]
    """
    Indicates that you intend to make future payments with this PaymentIntent's payment method.

    If you provide a Customer with the PaymentIntent, you can use this parameter to [attach the payment method](https://docs.stripe.com/payments/save-during-payment) to the Customer after the PaymentIntent is confirmed and the customer completes any required actions. If you don't provide a Customer, you can still [attach](https://docs.stripe.com/api/payment_methods/attach) the payment method to a Customer after the transaction completes.

    If the payment method is `card_present` and isn't a digital wallet, Stripe creates and attaches a [generated_card](https://docs.stripe.com/api/charges/object#charge_object-payment_method_details-card_present-generated_card) payment method representing the card to the Customer instead.

    When processing card payments, Stripe uses `setup_future_usage` to help you comply with regional legislation and network rules, such as [SCA](https://docs.stripe.com/strong-customer-authentication).

    If you've already set `setup_future_usage` and you're performing a request using a publishable key, you can only update the value from `on_session` to `off_session`.
    """


class PaymentIntentUpdateParamsPaymentMethodOptionsMbWay(TypedDict):
    setup_future_usage: NotRequired[Literal["none"]]
    """
    Indicates that you intend to make future payments with this PaymentIntent's payment method.

    If you provide a Customer with the PaymentIntent, you can use this parameter to [attach the payment method](https://docs.stripe.com/payments/save-during-payment) to the Customer after the PaymentIntent is confirmed and the customer completes any required actions. If you don't provide a Customer, you can still [attach](https://docs.stripe.com/api/payment_methods/attach) the payment method to a Customer after the transaction completes.

    If the payment method is `card_present` and isn't a digital wallet, Stripe creates and attaches a [generated_card](https://docs.stripe.com/api/charges/object#charge_object-payment_method_details-card_present-generated_card) payment method representing the card to the Customer instead.

    When processing card payments, Stripe uses `setup_future_usage` to help you comply with regional legislation and network rules, such as [SCA](https://docs.stripe.com/strong-customer-authentication).

    If you've already set `setup_future_usage` and you're performing a request using a publishable key, you can only update the value from `on_session` to `off_session`.
    """


class PaymentIntentUpdateParamsPaymentMethodOptionsMobilepay(TypedDict):
    capture_method: NotRequired["Literal['']|Literal['manual']"]
    """
    Controls when the funds are captured from the customer's account.

    If provided, this parameter overrides the behavior of the top-level [capture_method](https://docs.stripe.com/api/payment_intents/update#update_payment_intent-capture_method) for this payment method type when finalizing the payment with this payment method type.

    If `capture_method` is already set on the PaymentIntent, providing an empty value for this parameter unsets the stored value for this payment method type.
    """
    setup_future_usage: NotRequired[Literal["none"]]
    """
    Indicates that you intend to make future payments with this PaymentIntent's payment method.

    If you provide a Customer with the PaymentIntent, you can use this parameter to [attach the payment method](https://docs.stripe.com/payments/save-during-payment) to the Customer after the PaymentIntent is confirmed and the customer completes any required actions. If you don't provide a Customer, you can still [attach](https://docs.stripe.com/api/payment_methods/attach) the payment method to a Customer after the transaction completes.

    If the payment method is `card_present` and isn't a digital wallet, Stripe creates and attaches a [generated_card](https://docs.stripe.com/api/charges/object#charge_object-payment_method_details-card_present-generated_card) payment method representing the card to the Customer instead.

    When processing card payments, Stripe uses `setup_future_usage` to help you comply with regional legislation and network rules, such as [SCA](https://docs.stripe.com/strong-customer-authentication).

    If you've already set `setup_future_usage` and you're performing a request using a publishable key, you can only update the value from `on_session` to `off_session`.
    """


class PaymentIntentUpdateParamsPaymentMethodOptionsMultibanco(TypedDict):
    setup_future_usage: NotRequired[Literal["none"]]
    """
    Indicates that you intend to make future payments with this PaymentIntent's payment method.

    If you provide a Customer with the PaymentIntent, you can use this parameter to [attach the payment method](https://docs.stripe.com/payments/save-during-payment) to the Customer after the PaymentIntent is confirmed and the customer completes any required actions. If you don't provide a Customer, you can still [attach](https://docs.stripe.com/api/payment_methods/attach) the payment method to a Customer after the transaction completes.

    If the payment method is `card_present` and isn't a digital wallet, Stripe creates and attaches a [generated_card](https://docs.stripe.com/api/charges/object#charge_object-payment_method_details-card_present-generated_card) payment method representing the card to the Customer instead.

    When processing card payments, Stripe uses `setup_future_usage` to help you comply with regional legislation and network rules, such as [SCA](https://docs.stripe.com/strong-customer-authentication).

    If you've already set `setup_future_usage` and you're performing a request using a publishable key, you can only update the value from `on_session` to `off_session`.
    """


class PaymentIntentUpdateParamsPaymentMethodOptionsNaverPay(TypedDict):
    capture_method: NotRequired["Literal['']|Literal['manual']"]
    """
    Controls when the funds are captured from the customer's account.

    If provided, this parameter overrides the behavior of the top-level [capture_method](https://docs.stripe.com/api/payment_intents/update#update_payment_intent-capture_method) for this payment method type when finalizing the payment with this payment method type.

    If `capture_method` is already set on the PaymentIntent, providing an empty value for this parameter unsets the stored value for this payment method type.
    """
    setup_future_usage: NotRequired[
        "Literal['']|Literal['none', 'off_session']"
    ]
    """
    Indicates that you intend to make future payments with this PaymentIntent's payment method.

    If you provide a Customer with the PaymentIntent, you can use this parameter to [attach the payment method](https://docs.stripe.com/payments/save-during-payment) to the Customer after the PaymentIntent is confirmed and the customer completes any required actions. If you don't provide a Customer, you can still [attach](https://docs.stripe.com/api/payment_methods/attach) the payment method to a Customer after the transaction completes.

    If the payment method is `card_present` and isn't a digital wallet, Stripe creates and attaches a [generated_card](https://docs.stripe.com/api/charges/object#charge_object-payment_method_details-card_present-generated_card) payment method representing the card to the Customer instead.

    When processing card payments, Stripe uses `setup_future_usage` to help you comply with regional legislation and network rules, such as [SCA](https://docs.stripe.com/strong-customer-authentication).
    """


class PaymentIntentUpdateParamsPaymentMethodOptionsNzBankAccount(TypedDict):
    setup_future_usage: NotRequired[
        "Literal['']|Literal['none', 'off_session', 'on_session']"
    ]
    """
    Indicates that you intend to make future payments with this PaymentIntent's payment method.

    If you provide a Customer with the PaymentIntent, you can use this parameter to [attach the payment method](https://docs.stripe.com/payments/save-during-payment) to the Customer after the PaymentIntent is confirmed and the customer completes any required actions. If you don't provide a Customer, you can still [attach](https://docs.stripe.com/api/payment_methods/attach) the payment method to a Customer after the transaction completes.

    If the payment method is `card_present` and isn't a digital wallet, Stripe creates and attaches a [generated_card](https://docs.stripe.com/api/charges/object#charge_object-payment_method_details-card_present-generated_card) payment method representing the card to the Customer instead.

    When processing card payments, Stripe uses `setup_future_usage` to help you comply with regional legislation and network rules, such as [SCA](https://docs.stripe.com/strong-customer-authentication).

    If you've already set `setup_future_usage` and you're performing a request using a publishable key, you can only update the value from `on_session` to `off_session`.
    """
    target_date: NotRequired[str]
    """
    Controls when Stripe will attempt to debit the funds from the customer's account. The date must be a string in YYYY-MM-DD format. The date must be in the future and between 3 and 15 calendar days from now.
    """


class PaymentIntentUpdateParamsPaymentMethodOptionsOxxo(TypedDict):
    expires_after_days: NotRequired[int]
    """
    The number of calendar days before an OXXO voucher expires. For example, if you create an OXXO voucher on Monday and you set expires_after_days to 2, the OXXO invoice will expire on Wednesday at 23:59 America/Mexico_City time.
    """
    setup_future_usage: NotRequired[Literal["none"]]
    """
    Indicates that you intend to make future payments with this PaymentIntent's payment method.

    If you provide a Customer with the PaymentIntent, you can use this parameter to [attach the payment method](https://docs.stripe.com/payments/save-during-payment) to the Customer after the PaymentIntent is confirmed and the customer completes any required actions. If you don't provide a Customer, you can still [attach](https://docs.stripe.com/api/payment_methods/attach) the payment method to a Customer after the transaction completes.

    If the payment method is `card_present` and isn't a digital wallet, Stripe creates and attaches a [generated_card](https://docs.stripe.com/api/charges/object#charge_object-payment_method_details-card_present-generated_card) payment method representing the card to the Customer instead.

    When processing card payments, Stripe uses `setup_future_usage` to help you comply with regional legislation and network rules, such as [SCA](https://docs.stripe.com/strong-customer-authentication).

    If you've already set `setup_future_usage` and you're performing a request using a publishable key, you can only update the value from `on_session` to `off_session`.
    """


class PaymentIntentUpdateParamsPaymentMethodOptionsP24(TypedDict):
    setup_future_usage: NotRequired[Literal["none"]]
    """
    Indicates that you intend to make future payments with this PaymentIntent's payment method.

    If you provide a Customer with the PaymentIntent, you can use this parameter to [attach the payment method](https://docs.stripe.com/payments/save-during-payment) to the Customer after the PaymentIntent is confirmed and the customer completes any required actions. If you don't provide a Customer, you can still [attach](https://docs.stripe.com/api/payment_methods/attach) the payment method to a Customer after the transaction completes.

    If the payment method is `card_present` and isn't a digital wallet, Stripe creates and attaches a [generated_card](https://docs.stripe.com/api/charges/object#charge_object-payment_method_details-card_present-generated_card) payment method representing the card to the Customer instead.

    When processing card payments, Stripe uses `setup_future_usage` to help you comply with regional legislation and network rules, such as [SCA](https://docs.stripe.com/strong-customer-authentication).

    If you've already set `setup_future_usage` and you're performing a request using a publishable key, you can only update the value from `on_session` to `off_session`.
    """
    tos_shown_and_accepted: NotRequired[bool]
    """
    Confirm that the payer has accepted the P24 terms and conditions.
    """


class PaymentIntentUpdateParamsPaymentMethodOptionsPayByBank(TypedDict):
    pass


class PaymentIntentUpdateParamsPaymentMethodOptionsPayco(TypedDict):
    capture_method: NotRequired["Literal['']|Literal['manual']"]
    """
    Controls when the funds are captured from the customer's account.

    If provided, this parameter overrides the behavior of the top-level [capture_method](https://docs.stripe.com/api/payment_intents/update#update_payment_intent-capture_method) for this payment method type when finalizing the payment with this payment method type.

    If `capture_method` is already set on the PaymentIntent, providing an empty value for this parameter unsets the stored value for this payment method type.
    """


class PaymentIntentUpdateParamsPaymentMethodOptionsPaynow(TypedDict):
    setup_future_usage: NotRequired[Literal["none"]]
    """
    Indicates that you intend to make future payments with this PaymentIntent's payment method.

    If you provide a Customer with the PaymentIntent, you can use this parameter to [attach the payment method](https://docs.stripe.com/payments/save-during-payment) to the Customer after the PaymentIntent is confirmed and the customer completes any required actions. If you don't provide a Customer, you can still [attach](https://docs.stripe.com/api/payment_methods/attach) the payment method to a Customer after the transaction completes.

    If the payment method is `card_present` and isn't a digital wallet, Stripe creates and attaches a [generated_card](https://docs.stripe.com/api/charges/object#charge_object-payment_method_details-card_present-generated_card) payment method representing the card to the Customer instead.

    When processing card payments, Stripe uses `setup_future_usage` to help you comply with regional legislation and network rules, such as [SCA](https://docs.stripe.com/strong-customer-authentication).

    If you've already set `setup_future_usage` and you're performing a request using a publishable key, you can only update the value from `on_session` to `off_session`.
    """


class PaymentIntentUpdateParamsPaymentMethodOptionsPaypal(TypedDict):
    capture_method: NotRequired["Literal['']|Literal['manual']"]
    """
    Controls when the funds will be captured from the customer's account.
    """
    preferred_locale: NotRequired[
        Literal[
            "cs-CZ",
            "da-DK",
            "de-AT",
            "de-DE",
            "de-LU",
            "el-GR",
            "en-GB",
            "en-US",
            "es-ES",
            "fi-FI",
            "fr-BE",
            "fr-FR",
            "fr-LU",
            "hu-HU",
            "it-IT",
            "nl-BE",
            "nl-NL",
            "pl-PL",
            "pt-PT",
            "sk-SK",
            "sv-SE",
        ]
    ]
    """
    [Preferred locale](https://docs.stripe.com/payments/paypal/supported-locales) of the PayPal checkout page that the customer is redirected to.
    """
    reference: NotRequired[str]
    """
    A reference of the PayPal transaction visible to customer which is mapped to PayPal's invoice ID. This must be a globally unique ID if you have configured in your PayPal settings to block multiple payments per invoice ID.
    """
    risk_correlation_id: NotRequired[str]
    """
    The risk correlation ID for an on-session payment using a saved PayPal payment method.
    """
    setup_future_usage: NotRequired[
        "Literal['']|Literal['none', 'off_session']"
    ]
    """
    Indicates that you intend to make future payments with this PaymentIntent's payment method.

    If you provide a Customer with the PaymentIntent, you can use this parameter to [attach the payment method](https://docs.stripe.com/payments/save-during-payment) to the Customer after the PaymentIntent is confirmed and the customer completes any required actions. If you don't provide a Customer, you can still [attach](https://docs.stripe.com/api/payment_methods/attach) the payment method to a Customer after the transaction completes.

    If the payment method is `card_present` and isn't a digital wallet, Stripe creates and attaches a [generated_card](https://docs.stripe.com/api/charges/object#charge_object-payment_method_details-card_present-generated_card) payment method representing the card to the Customer instead.

    When processing card payments, Stripe uses `setup_future_usage` to help you comply with regional legislation and network rules, such as [SCA](https://docs.stripe.com/strong-customer-authentication).

    If you've already set `setup_future_usage` and you're performing a request using a publishable key, you can only update the value from `on_session` to `off_session`.
    """


class PaymentIntentUpdateParamsPaymentMethodOptionsPayto(TypedDict):
    mandate_options: NotRequired[
        "PaymentIntentUpdateParamsPaymentMethodOptionsPaytoMandateOptions"
    ]
    """
    Additional fields for Mandate creation. Only `purpose` field is configurable for PayTo PaymentIntent with `setup_future_usage=none`. Other fields are only applicable to PayTo PaymentIntent with `setup_future_usage=off_session`
    """
    setup_future_usage: NotRequired[
        "Literal['']|Literal['none', 'off_session']"
    ]
    """
    Indicates that you intend to make future payments with this PaymentIntent's payment method.

    If you provide a Customer with the PaymentIntent, you can use this parameter to [attach the payment method](https://docs.stripe.com/payments/save-during-payment) to the Customer after the PaymentIntent is confirmed and the customer completes any required actions. If you don't provide a Customer, you can still [attach](https://docs.stripe.com/api/payment_methods/attach) the payment method to a Customer after the transaction completes.

    If the payment method is `card_present` and isn't a digital wallet, Stripe creates and attaches a [generated_card](https://docs.stripe.com/api/charges/object#charge_object-payment_method_details-card_present-generated_card) payment method representing the card to the Customer instead.

    When processing card payments, Stripe uses `setup_future_usage` to help you comply with regional legislation and network rules, such as [SCA](https://docs.stripe.com/strong-customer-authentication).

    If you've already set `setup_future_usage` and you're performing a request using a publishable key, you can only update the value from `on_session` to `off_session`.
    """


class PaymentIntentUpdateParamsPaymentMethodOptionsPaytoMandateOptions(
    TypedDict,
):
    amount: NotRequired["Literal['']|int"]
    """
    Amount that will be collected. It is required when `amount_type` is `fixed`.
    """
    amount_type: NotRequired["Literal['']|Literal['fixed', 'maximum']"]
    """
    The type of amount that will be collected. The amount charged must be exact or up to the value of `amount` param for `fixed` or `maximum` type respectively. Defaults to `maximum`.
    """
    end_date: NotRequired["Literal['']|str"]
    """
    Date, in YYYY-MM-DD format, after which payments will not be collected. Defaults to no end date.
    """
    payment_schedule: NotRequired[
        "Literal['']|Literal['adhoc', 'annual', 'daily', 'fortnightly', 'monthly', 'quarterly', 'semi_annual', 'weekly']"
    ]
    """
    The periodicity at which payments will be collected. Defaults to `adhoc`.
    """
    payments_per_period: NotRequired["Literal['']|int"]
    """
    The number of payments that will be made during a payment period. Defaults to 1 except for when `payment_schedule` is `adhoc`. In that case, it defaults to no limit.
    """
    purpose: NotRequired[
        "Literal['']|Literal['dependant_support', 'government', 'loan', 'mortgage', 'other', 'pension', 'personal', 'retail', 'salary', 'tax', 'utility']"
    ]
    """
    The purpose for which payments are made. Has a default value based on your merchant category code.
    """


class PaymentIntentUpdateParamsPaymentMethodOptionsPix(TypedDict):
    amount_includes_iof: NotRequired[Literal["always", "never"]]
    """
    Determines if the amount includes the IOF tax. Defaults to `never`.
    """
    expires_after_seconds: NotRequired[int]
    """
    The number of seconds (between 10 and 1209600) after which Pix payment will expire. Defaults to 86400 seconds.
    """
    expires_at: NotRequired[int]
    """
    The timestamp at which the Pix expires (between 10 and 1209600 seconds in the future). Defaults to 1 day in the future.
    """
    setup_future_usage: NotRequired[Literal["none"]]
    """
    Indicates that you intend to make future payments with this PaymentIntent's payment method.

    If you provide a Customer with the PaymentIntent, you can use this parameter to [attach the payment method](https://docs.stripe.com/payments/save-during-payment) to the Customer after the PaymentIntent is confirmed and the customer completes any required actions. If you don't provide a Customer, you can still [attach](https://docs.stripe.com/api/payment_methods/attach) the payment method to a Customer after the transaction completes.

    If the payment method is `card_present` and isn't a digital wallet, Stripe creates and attaches a [generated_card](https://docs.stripe.com/api/charges/object#charge_object-payment_method_details-card_present-generated_card) payment method representing the card to the Customer instead.

    When processing card payments, Stripe uses `setup_future_usage` to help you comply with regional legislation and network rules, such as [SCA](https://docs.stripe.com/strong-customer-authentication).

    If you've already set `setup_future_usage` and you're performing a request using a publishable key, you can only update the value from `on_session` to `off_session`.
    """


class PaymentIntentUpdateParamsPaymentMethodOptionsPromptpay(TypedDict):
    setup_future_usage: NotRequired[Literal["none"]]
    """
    Indicates that you intend to make future payments with this PaymentIntent's payment method.

    If you provide a Customer with the PaymentIntent, you can use this parameter to [attach the payment method](https://docs.stripe.com/payments/save-during-payment) to the Customer after the PaymentIntent is confirmed and the customer completes any required actions. If you don't provide a Customer, you can still [attach](https://docs.stripe.com/api/payment_methods/attach) the payment method to a Customer after the transaction completes.

    If the payment method is `card_present` and isn't a digital wallet, Stripe creates and attaches a [generated_card](https://docs.stripe.com/api/charges/object#charge_object-payment_method_details-card_present-generated_card) payment method representing the card to the Customer instead.

    When processing card payments, Stripe uses `setup_future_usage` to help you comply with regional legislation and network rules, such as [SCA](https://docs.stripe.com/strong-customer-authentication).

    If you've already set `setup_future_usage` and you're performing a request using a publishable key, you can only update the value from `on_session` to `off_session`.
    """


class PaymentIntentUpdateParamsPaymentMethodOptionsRevolutPay(TypedDict):
    capture_method: NotRequired["Literal['']|Literal['manual']"]
    """
    Controls when the funds are captured from the customer's account.

    If provided, this parameter overrides the behavior of the top-level [capture_method](https://docs.stripe.com/api/payment_intents/update#update_payment_intent-capture_method) for this payment method type when finalizing the payment with this payment method type.

    If `capture_method` is already set on the PaymentIntent, providing an empty value for this parameter unsets the stored value for this payment method type.
    """
    setup_future_usage: NotRequired[
        "Literal['']|Literal['none', 'off_session']"
    ]
    """
    Indicates that you intend to make future payments with this PaymentIntent's payment method.

    If you provide a Customer with the PaymentIntent, you can use this parameter to [attach the payment method](https://docs.stripe.com/payments/save-during-payment) to the Customer after the PaymentIntent is confirmed and the customer completes any required actions. If you don't provide a Customer, you can still [attach](https://docs.stripe.com/api/payment_methods/attach) the payment method to a Customer after the transaction completes.

    If the payment method is `card_present` and isn't a digital wallet, Stripe creates and attaches a [generated_card](https://docs.stripe.com/api/charges/object#charge_object-payment_method_details-card_present-generated_card) payment method representing the card to the Customer instead.

    When processing card payments, Stripe uses `setup_future_usage` to help you comply with regional legislation and network rules, such as [SCA](https://docs.stripe.com/strong-customer-authentication).
    """


class PaymentIntentUpdateParamsPaymentMethodOptionsSamsungPay(TypedDict):
    capture_method: NotRequired["Literal['']|Literal['manual']"]
    """
    Controls when the funds are captured from the customer's account.

    If provided, this parameter overrides the behavior of the top-level [capture_method](https://docs.stripe.com/api/payment_intents/update#update_payment_intent-capture_method) for this payment method type when finalizing the payment with this payment method type.

    If `capture_method` is already set on the PaymentIntent, providing an empty value for this parameter unsets the stored value for this payment method type.
    """


class PaymentIntentUpdateParamsPaymentMethodOptionsSatispay(TypedDict):
    capture_method: NotRequired["Literal['']|Literal['manual']"]
    """
    Controls when the funds are captured from the customer's account.

    If provided, this parameter overrides the behavior of the top-level [capture_method](https://docs.stripe.com/api/payment_intents/update#update_payment_intent-capture_method) for this payment method type when finalizing the payment with this payment method type.

    If `capture_method` is already set on the PaymentIntent, providing an empty value for this parameter unsets the stored value for this payment method type.
    """


class PaymentIntentUpdateParamsPaymentMethodOptionsSepaDebit(TypedDict):
    mandate_options: NotRequired[
        "PaymentIntentUpdateParamsPaymentMethodOptionsSepaDebitMandateOptions"
    ]
    """
    Additional fields for Mandate creation
    """
    setup_future_usage: NotRequired[
        "Literal['']|Literal['none', 'off_session', 'on_session']"
    ]
    """
    Indicates that you intend to make future payments with this PaymentIntent's payment method.

    If you provide a Customer with the PaymentIntent, you can use this parameter to [attach the payment method](https://docs.stripe.com/payments/save-during-payment) to the Customer after the PaymentIntent is confirmed and the customer completes any required actions. If you don't provide a Customer, you can still [attach](https://docs.stripe.com/api/payment_methods/attach) the payment method to a Customer after the transaction completes.

    If the payment method is `card_present` and isn't a digital wallet, Stripe creates and attaches a [generated_card](https://docs.stripe.com/api/charges/object#charge_object-payment_method_details-card_present-generated_card) payment method representing the card to the Customer instead.

    When processing card payments, Stripe uses `setup_future_usage` to help you comply with regional legislation and network rules, such as [SCA](https://docs.stripe.com/strong-customer-authentication).

    If you've already set `setup_future_usage` and you're performing a request using a publishable key, you can only update the value from `on_session` to `off_session`.
    """
    target_date: NotRequired[str]
    """
    Controls when Stripe will attempt to debit the funds from the customer's account. The date must be a string in YYYY-MM-DD format. The date must be in the future and between 3 and 15 calendar days from now.
    """


class PaymentIntentUpdateParamsPaymentMethodOptionsSepaDebitMandateOptions(
    TypedDict,
):
    reference_prefix: NotRequired["Literal['']|str"]
    """
    Prefix used to generate the Mandate reference. Must be at most 12 characters long. Must consist of only uppercase letters, numbers, spaces, or the following special characters: '/', '_', '-', '&', '.'. Cannot begin with 'STRIPE'.
    """


class PaymentIntentUpdateParamsPaymentMethodOptionsSofort(TypedDict):
    preferred_language: NotRequired[
        "Literal['']|Literal['de', 'en', 'es', 'fr', 'it', 'nl', 'pl']"
    ]
    """
    Language shown to the payer on redirect.
    """
    setup_future_usage: NotRequired[
        "Literal['']|Literal['none', 'off_session']"
    ]
    """
    Indicates that you intend to make future payments with this PaymentIntent's payment method.

    If you provide a Customer with the PaymentIntent, you can use this parameter to [attach the payment method](https://docs.stripe.com/payments/save-during-payment) to the Customer after the PaymentIntent is confirmed and the customer completes any required actions. If you don't provide a Customer, you can still [attach](https://docs.stripe.com/api/payment_methods/attach) the payment method to a Customer after the transaction completes.

    If the payment method is `card_present` and isn't a digital wallet, Stripe creates and attaches a [generated_card](https://docs.stripe.com/api/charges/object#charge_object-payment_method_details-card_present-generated_card) payment method representing the card to the Customer instead.

    When processing card payments, Stripe uses `setup_future_usage` to help you comply with regional legislation and network rules, such as [SCA](https://docs.stripe.com/strong-customer-authentication).

    If you've already set `setup_future_usage` and you're performing a request using a publishable key, you can only update the value from `on_session` to `off_session`.
    """


class PaymentIntentUpdateParamsPaymentMethodOptionsSwish(TypedDict):
    reference: NotRequired["Literal['']|str"]
    """
    A reference for this payment to be displayed in the Swish app.
    """
    setup_future_usage: NotRequired[Literal["none"]]
    """
    Indicates that you intend to make future payments with this PaymentIntent's payment method.

    If you provide a Customer with the PaymentIntent, you can use this parameter to [attach the payment method](https://docs.stripe.com/payments/save-during-payment) to the Customer after the PaymentIntent is confirmed and the customer completes any required actions. If you don't provide a Customer, you can still [attach](https://docs.stripe.com/api/payment_methods/attach) the payment method to a Customer after the transaction completes.

    If the payment method is `card_present` and isn't a digital wallet, Stripe creates and attaches a [generated_card](https://docs.stripe.com/api/charges/object#charge_object-payment_method_details-card_present-generated_card) payment method representing the card to the Customer instead.

    When processing card payments, Stripe uses `setup_future_usage` to help you comply with regional legislation and network rules, such as [SCA](https://docs.stripe.com/strong-customer-authentication).

    If you've already set `setup_future_usage` and you're performing a request using a publishable key, you can only update the value from `on_session` to `off_session`.
    """


class PaymentIntentUpdateParamsPaymentMethodOptionsTwint(TypedDict):
    setup_future_usage: NotRequired[Literal["none"]]
    """
    Indicates that you intend to make future payments with this PaymentIntent's payment method.

    If you provide a Customer with the PaymentIntent, you can use this parameter to [attach the payment method](https://docs.stripe.com/payments/save-during-payment) to the Customer after the PaymentIntent is confirmed and the customer completes any required actions. If you don't provide a Customer, you can still [attach](https://docs.stripe.com/api/payment_methods/attach) the payment method to a Customer after the transaction completes.

    If the payment method is `card_present` and isn't a digital wallet, Stripe creates and attaches a [generated_card](https://docs.stripe.com/api/charges/object#charge_object-payment_method_details-card_present-generated_card) payment method representing the card to the Customer instead.

    When processing card payments, Stripe uses `setup_future_usage` to help you comply with regional legislation and network rules, such as [SCA](https://docs.stripe.com/strong-customer-authentication).

    If you've already set `setup_future_usage` and you're performing a request using a publishable key, you can only update the value from `on_session` to `off_session`.
    """


class PaymentIntentUpdateParamsPaymentMethodOptionsUsBankAccount(TypedDict):
    financial_connections: NotRequired[
        "PaymentIntentUpdateParamsPaymentMethodOptionsUsBankAccountFinancialConnections"
    ]
    """
    Additional fields for Financial Connections Session creation
    """
    mandate_options: NotRequired[
        "PaymentIntentUpdateParamsPaymentMethodOptionsUsBankAccountMandateOptions"
    ]
    """
    Additional fields for Mandate creation
    """
    networks: NotRequired[
        "PaymentIntentUpdateParamsPaymentMethodOptionsUsBankAccountNetworks"
    ]
    """
    Additional fields for network related functions
    """
    setup_future_usage: NotRequired[
        "Literal['']|Literal['none', 'off_session', 'on_session']"
    ]
    """
    Indicates that you intend to make future payments with this PaymentIntent's payment method.

    If you provide a Customer with the PaymentIntent, you can use this parameter to [attach the payment method](https://docs.stripe.com/payments/save-during-payment) to the Customer after the PaymentIntent is confirmed and the customer completes any required actions. If you don't provide a Customer, you can still [attach](https://docs.stripe.com/api/payment_methods/attach) the payment method to a Customer after the transaction completes.

    If the payment method is `card_present` and isn't a digital wallet, Stripe creates and attaches a [generated_card](https://docs.stripe.com/api/charges/object#charge_object-payment_method_details-card_present-generated_card) payment method representing the card to the Customer instead.

    When processing card payments, Stripe uses `setup_future_usage` to help you comply with regional legislation and network rules, such as [SCA](https://docs.stripe.com/strong-customer-authentication).

    If you've already set `setup_future_usage` and you're performing a request using a publishable key, you can only update the value from `on_session` to `off_session`.
    """
    target_date: NotRequired[str]
    """
    Controls when Stripe will attempt to debit the funds from the customer's account. The date must be a string in YYYY-MM-DD format. The date must be in the future and between 3 and 15 calendar days from now.
    """
    transaction_purpose: NotRequired[
        "Literal['']|Literal['goods', 'other', 'services', 'unspecified']"
    ]
    """
    The purpose of the transaction.
    """
    verification_method: NotRequired[
        Literal["automatic", "instant", "microdeposits"]
    ]
    """
    Bank account verification method.
    """
    preferred_settlement_speed: NotRequired[
        "Literal['']|Literal['fastest', 'standard']"
    ]
    """
    Preferred transaction settlement speed
    """


class PaymentIntentUpdateParamsPaymentMethodOptionsUsBankAccountFinancialConnections(
    TypedDict,
):
    filters: NotRequired[
        "PaymentIntentUpdateParamsPaymentMethodOptionsUsBankAccountFinancialConnectionsFilters"
    ]
    """
    Provide filters for the linked accounts that the customer can select for the payment method.
    """
    permissions: NotRequired[
        List[
            Literal["balances", "ownership", "payment_method", "transactions"]
        ]
    ]
    """
    The list of permissions to request. If this parameter is passed, the `payment_method` permission must be included. Valid permissions include: `balances`, `ownership`, `payment_method`, and `transactions`.
    """
    prefetch: NotRequired[
        List[Literal["balances", "ownership", "transactions"]]
    ]
    """
    List of data features that you would like to retrieve upon account creation.
    """
    return_url: NotRequired[str]
    """
    For webview integrations only. Upon completing OAuth login in the native browser, the user will be redirected to this URL to return to your app.
    """


class PaymentIntentUpdateParamsPaymentMethodOptionsUsBankAccountFinancialConnectionsFilters(
    TypedDict,
):
    account_subcategories: NotRequired[List[Literal["checking", "savings"]]]
    """
    The account subcategories to use to filter for selectable accounts. Valid subcategories are `checking` and `savings`.
    """


class PaymentIntentUpdateParamsPaymentMethodOptionsUsBankAccountMandateOptions(
    TypedDict,
):
    collection_method: NotRequired["Literal['']|Literal['paper']"]
    """
    The method used to collect offline mandate customer acceptance.
    """


class PaymentIntentUpdateParamsPaymentMethodOptionsUsBankAccountNetworks(
    TypedDict,
):
    requested: NotRequired[List[Literal["ach", "us_domestic_wire"]]]
    """
    Triggers validations to run across the selected networks
    """


class PaymentIntentUpdateParamsPaymentMethodOptionsWechatPay(TypedDict):
    app_id: NotRequired[str]
    """
    The app ID registered with WeChat Pay. Only required when client is ios or android.
    """
    client: NotRequired[Literal["android", "ios", "web"]]
    """
    The client type that the end customer will pay from
    """
    setup_future_usage: NotRequired[Literal["none"]]
    """
    Indicates that you intend to make future payments with this PaymentIntent's payment method.

    If you provide a Customer with the PaymentIntent, you can use this parameter to [attach the payment method](https://docs.stripe.com/payments/save-during-payment) to the Customer after the PaymentIntent is confirmed and the customer completes any required actions. If you don't provide a Customer, you can still [attach](https://docs.stripe.com/api/payment_methods/attach) the payment method to a Customer after the transaction completes.

    If the payment method is `card_present` and isn't a digital wallet, Stripe creates and attaches a [generated_card](https://docs.stripe.com/api/charges/object#charge_object-payment_method_details-card_present-generated_card) payment method representing the card to the Customer instead.

    When processing card payments, Stripe uses `setup_future_usage` to help you comply with regional legislation and network rules, such as [SCA](https://docs.stripe.com/strong-customer-authentication).

    If you've already set `setup_future_usage` and you're performing a request using a publishable key, you can only update the value from `on_session` to `off_session`.
    """


class PaymentIntentUpdateParamsPaymentMethodOptionsZip(TypedDict):
    setup_future_usage: NotRequired[Literal["none"]]
    """
    Indicates that you intend to make future payments with this PaymentIntent's payment method.

    If you provide a Customer with the PaymentIntent, you can use this parameter to [attach the payment method](https://docs.stripe.com/payments/save-during-payment) to the Customer after the PaymentIntent is confirmed and the customer completes any required actions. If you don't provide a Customer, you can still [attach](https://docs.stripe.com/api/payment_methods/attach) the payment method to a Customer after the transaction completes.

    If the payment method is `card_present` and isn't a digital wallet, Stripe creates and attaches a [generated_card](https://docs.stripe.com/api/charges/object#charge_object-payment_method_details-card_present-generated_card) payment method representing the card to the Customer instead.

    When processing card payments, Stripe uses `setup_future_usage` to help you comply with regional legislation and network rules, such as [SCA](https://docs.stripe.com/strong-customer-authentication).

    If you've already set `setup_future_usage` and you're performing a request using a publishable key, you can only update the value from `on_session` to `off_session`.
    """


class PaymentIntentUpdateParamsShipping(TypedDict):
    address: "PaymentIntentUpdateParamsShippingAddress"
    """
    Shipping address.
    """
    carrier: NotRequired[str]
    """
    The delivery service that shipped a physical product, such as Fedex, UPS, USPS, etc.
    """
    name: str
    """
    Recipient name.
    """
    phone: NotRequired[str]
    """
    Recipient phone (including extension).
    """
    tracking_number: NotRequired[str]
    """
    The tracking number for a physical product, obtained from the delivery service. If multiple tracking numbers were generated for this purchase, please separate them with commas.
    """


class PaymentIntentUpdateParamsShippingAddress(TypedDict):
    city: NotRequired[str]
    """
    City, district, suburb, town, or village.
    """
    country: NotRequired[str]
    """
    Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)).
    """
    line1: NotRequired[str]
    """
    Address line 1, such as the street, PO Box, or company name.
    """
    line2: NotRequired[str]
    """
    Address line 2, such as the apartment, suite, unit, or building.
    """
    postal_code: NotRequired[str]
    """
    ZIP or postal code.
    """
    state: NotRequired[str]
    """
    State, county, province, or region ([ISO 3166-2](https://en.wikipedia.org/wiki/ISO_3166-2)).
    """


class PaymentIntentUpdateParamsTransferData(TypedDict):
    amount: NotRequired[int]
    """
    The amount that will be transferred automatically when a charge succeeds.
    """
