#!/bin/sh
#*************************************************************************
#
#   $RCSfile: soffice.sh,v $
#
#   $Revision: 1.1.2.4 $
#
#   last change: $Author: armin $ $Date: 2003/03/31 16:42:29 $
#
#   The Contents of this file are made available subject to the terms of
#   either of the following licenses
#
#          - GNU Lesser General Public License Version 2.1
#          - Sun Industry Standards Source License Version 1.1
#
#   Sun Microsystems Inc., October, 2000
#
#   GNU Lesser General Public License Version 2.1
#   =============================================
#   Copyright 2000 by Sun Microsystems, Inc.
#   901 San Antonio Road, Palo Alto, CA 94303, USA
#
#   This library is free software; you can redistribute it and/or
#   modify it under the terms of the GNU Lesser General Public
#   License version 2.1, as published by the Free Software Foundation.
#
#   This library is distributed in the hope that it will be useful,
#   but WITHOUT ANY WARRANTY; without even the implied warranty of
#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
#   Lesser General Public License for more details.
#
#   You should have received a copy of the GNU Lesser General Public
#   License along with this library; if not, write to the Free Software
#   Foundation, Inc., 59 Temple Place, Suite 330, Boston,
#   MA  02111-1307  USA
#
#
#   Sun Industry Standards Source License Version 1.1
#   =================================================
#   The contents of this file are subject to the Sun Industry Standards
#   Source License Version 1.1 (the "License"); You may not use this file
#   except in compliance with the License. You may obtain a copy of the
#   License at http://www.openoffice.org/license.html.
#
#   Software provided under this License is provided on an "AS IS" basis,
#   WITHOUT WARRUNTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING,
#   WITHOUT LIMITATION, WARRUNTIES THAT THE SOFTWARE IS FREE OF DEFECTS,
#   MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE, OR NON-INFRINGING.
#   See the License for the specific provisions governing your rights and
#   obligations concerning the Software.
#
#   The Initial Developer of the Original Code is: Sun Microsystems, Inc..
#
#   Copyright: 2000 by Sun Microsystems, Inc.
#
#   All Rights Reserved.
#
#   Contributor(s): _______________________________________
#
#
#
#*************************************************************************

#
# STAR_PROFILE_LOCKING_DISABLED=1
# export STAR_PROFILE_LOCKING_DISABLED
#

#
# SAL_ENABLE_FILE_LOCKING=1
# export SAL_ENABLE_FILE_LOCKING
#

# uncomment this to remote start soffice on hostname  
# SO_REMOTE_START=rsh
# SO_REMOTE_APPLICATION=hostname:/fully_quallified_path/soffice

# set -x

# resolve installation directory
sd_platform=`uname -s`
case $sd_platform in
	SCO_SV) test=/bin/test     ;;
	FreeBSD) test=/bin/test     ;;
  	*)      test=/usr/bin/test ;;
esac

sd_cwd="`pwd`"
if $test -L "$0" ; then
	sd_basename=`basename "$0"`
 	sd_script=`ls -l $0 | sed "s/.*${sd_basename} -> //g"` 
 	sd_sub=`echo $sd_script | cut -f1 -d/`
	if [ "$sd_sub" = ".." ]; then
	 sd_script=`dirname $sd_script`
	fi
        if [ "$SO_MODE" = "" ]; then
            SO_MODE="remote"
        fi
else
	sd_script="$0"
fi

userinst=`echo $0 | sed "s/\.\/\(.*\)$/\1/"`
if [ `echo $userinst | sed "s/^\/.*/\//"` != "/" ]; then
	userinst=$sd_cwd/$userinst
	if [ "$sd_sub" = ".." ]; then
		userinst=`dirname "$userinst"`
	fi
fi
userinst=`dirname "$userinst"`
if [ `basename "$userinst"` = "program" ]; then
	userinst=`dirname "$userinst"`
fi

cd "`dirname "$sd_script"`"
sd_prog="`pwd`"
if [ "$SO_MODE" = "" ]; then
	SO_MODE="local";
fi
export SO_MODE

sd_progsub=$sd_prog/$SO_MODE

cd ..
sd_binary=`basename "$0"`".bin"
sd_inst="`pwd`"

# change back directory
cd "$sd_cwd"

sd_fonts="$sd_inst/share/fonts"

# check if all required patches are installed
if [ -x "$sd_prog/sopatchlevel.sh" ]; then
    "$sd_prog/sopatchlevel.sh"
    if [ $? -eq 1 ]; then
        exit 0
    fi
fi

# set search path for shared libraries
case $sd_platform in
  SunOS)
    LD_LIBRARY_PATH="$sd_progsub":"$sd_prog":/usr/openwin/lib:/usr/dt/lib:$LD_LIBRARY_PATH
    export LD_LIBRARY_PATH
    ;;

  AIX)
    LIBPATH="$sd_progsub":"$sd_prog":$LIBPATH
    export LIBPATH
    ;;

  HP-UX)
    SHLIB_PATH="$sd_progsub":"$sd_prog":/usr/openwin/lib:$SHLIB_PATH
    export SHLIB_PATH
    ;;

  IRIX*)
    LD_LIBRARYN32_PATH=:"$sd_progsub":"$sd_prog":$LD_LIBRARYN32_PATH
    export LD_LIBRARYN32_PATH
    ;;

  Linux)
    LD_LIBRARY_PATH="$sd_progsub":"$sd_prog":$LD_LIBRARY_PATH
    export LD_LIBRARY_PATH
    ;;

  *)
    LD_LIBRARY_PATH="$sd_progsub":"$sd_prog":$LD_LIBRARY_PATH
    export LD_LIBRARY_PATH
    ;;
esac

# extend the ld_library_path for java: javaldx checks the sofficerc for us
java_ld_library_path=`"$sd_prog/javaldx" "$1" "$2" "$3" "$4" "$5" "$6" "$7" "$8" "$9"`
if [ "$java_ld_library_path" != "" ] ; then
	case $sd_platform in
		IRIX*)
			LD_LIBRARYN32_PATH=${java_ld_library_path}:${LD_LIBRARYN32_PATH}
			;;
		*)
			LD_LIBRARY_PATH=${java_ld_library_path}:${LD_LIBRARY_PATH}
	esac
fi

# set java environment variables
THREADS_TYPE=native_threads

# misc. environment variables
SAL_FONTPATH="$sd_fonts/75dpi:unscaled;$sd_fonts/75dpi"
SAL_FONTPATH_PRIVATE="$sd_fonts/truetype;$sd_fonts/type1;$sd_fonts/serverfonts;$userinst/user/fonts"
XPPATH="$sd_inst/share/xp3"
MOZILLA_FIVE_HOME="$sd_inst/program"

unset XENVIRONMENT

export SAL_FONTPATH XPPATH SAL_FONTPATH_PRIVATE MOZILLA_FIVE_HOME

# uncomment line below to disable anti aliasing of fonts
#SAL_ANTIALIAS_DISABLE=true; export SAL_ANTIALIAS_DISABLE

# error message function
err () {
	echo "`basename $0`: $@" 1>&2
	exit 1
}

#
# parse command line arguments
#

plugin_mode=false
for DUMMY in ${1+"$@"}
do
	case $1 in

	?display) 
		if [ $# -lt 2 ]; then
			err "$1 option requires a display name"
	    fi
		DISPLAY=$2
		export DISPLAY
		shift; shift
		;;
	?plugin)

		plugin_mode=true
		shift
		;;	
	*)
		break;
		;;
	esac
done

# start soffice by remote shell
if [ "X${SO_REMOTE_START}" = "Xrsh" ]; then
	remote_server=`echo ${SO_REMOTE_APPLICATION} | sed 's/:.*//g'`
	remote_path=`echo ${SO_REMOTE_APPLICATION} | sed 's/.*://g'`
	echo remote_server=\"${remote_server}\" remote_path=\"${remote_path}\"
	if [ "X${DISPLAY}" = "X" ]; then
		local_display=`uname -n`:0
	else
		local_display=${DISPLAY}
	fi

	if [ "X${remote_server}" != "X" -a "X${remote_path}" != "X" ]; then
		rsh ${remote_server} ${remote_path} -norsh -display ${local_display}
		exit 0
	else
		err "invalid rsh arguments host=\"$remote_server\", command=\"${remote_path}\""
	fi
fi

# set path so that other apps can be started from soffice just by name
PATH="$sd_prog":$PATH
export PATH

# execute soffice binary
# there is a bug in solaris sh that prevents the use of "$@"
# because it cannot cope with spaces in directory names
if [ "X${plugin_mode}" = "Xtrue" ]; then
	SAL_IGNOREXERRORS=true
	export SAL_IGNOREXERRORS
	exec "$sd_prog/$sd_binary" -plugin "$@"
else
	exec "$sd_prog/$sd_binary" "$@"
fi

